Modify skylake panel fitting implementation to use shared scalers.
v2:
-added log message in pfit enable/disable (me)
-read crtc scaler state from hw state (Daniel)
-replaced both skylake_pfit_enable and disable with skylake_pfit_update (me)
-added scaler id check to intel_pipe_config_compare (Daniel)
Signed-off-by: Chandra Konduru <chandra.konduru@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 81 ++++++++++++++++++++++------------
1 file changed, 54 insertions(+), 27 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c393480..16dcd31 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4189,16 +4189,39 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe)
}
}
-static void skylake_pfit_enable(struct intel_crtc *crtc)
+static void skylake_pfit_update(struct intel_crtc *crtc, int enable)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe = crtc->pipe;
+ struct intel_crtc_scaler_state *scaler_state =
+ &crtc->config->scaler_state;
+
+ DRM_DEBUG_KMS("for crtc_state = %p\n", crtc->config);
+
+ /* To update pfit, first update scaler state */
+ skl_update_scaler_users(crtc, crtc->config, NULL, NULL, !enable);
+ intel_atomic_setup_scalers(crtc->base.dev, crtc, crtc->config);
+ skl_detach_scaler(&crtc->base, NULL);
+ if (!enable)
+ return;
if (crtc->config->pch_pfit.enabled) {
- I915_WRITE(PS_CTL(pipe), PS_ENABLE);
- I915_WRITE(PS_WIN_POS(pipe), crtc->config->pch_pfit.pos);
- I915_WRITE(PS_WIN_SZ(pipe), crtc->config->pch_pfit.size);
+ int id;
+
+ if (WARN_ON(crtc->config->scaler_state.scaler_id < 0)) {
+ DRM_ERROR("Requesting pfit without getting a scaler first\n");
+ return;
+ }
+
+ id = scaler_state->scaler_id;
+ I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
+ scaler_state->scalers[id].mode |
+ scaler_state->scalers[id].filter);
+ I915_WRITE(SKL_PS_WIN_POS(pipe, id), crtc->config->pch_pfit.pos);
+ I915_WRITE(SKL_PS_WIN_SZ(pipe, id), crtc->config->pch_pfit.size);
+
+ DRM_DEBUG_KMS("for crtc_state = %p scaler_id = %d\n", crtc->config, id);
}
}
@@ -4628,7 +4651,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
intel_ddi_enable_pipe_clock(intel_crtc);
if (IS_SKYLAKE(dev))
- skylake_pfit_enable(intel_crtc);
+ skylake_pfit_update(intel_crtc, 1);
else
ironlake_pfit_enable(intel_crtc);
@@ -4664,21 +4687,6 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
intel_crtc_enable_planes(crtc);
}
-static void skylake_pfit_disable(struct intel_crtc *crtc)
-{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int pipe = crtc->pipe;
-
- /* To avoid upsetting the power well on haswell only disable the pfit if
- * it's in use. The hw state code will make sure we get this right. */
- if (crtc->config->pch_pfit.enabled) {
- I915_WRITE(PS_CTL(pipe), 0);
- I915_WRITE(PS_WIN_POS(pipe), 0);
- I915_WRITE(PS_WIN_SZ(pipe), 0);
- }
-}
-
static void ironlake_pfit_disable(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
@@ -4791,7 +4799,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
if (IS_SKYLAKE(dev))
- skylake_pfit_disable(intel_crtc);
+ skylake_pfit_update(intel_crtc, 0);
else
ironlake_pfit_disable(intel_crtc);
@@ -7955,14 +7963,28 @@ static void skylake_get_pfit_config(struct intel_crtc *crtc,
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t tmp;
+ struct intel_crtc_scaler_state *scaler_state = &pipe_config->scaler_state;
+ uint32_t ps_ctrl = 0;
+ int id = -1;
+ int i;
- tmp = I915_READ(PS_CTL(crtc->pipe));
+ /* find scaler attached to this pipe */
+ for (i = 0; i < scaler_state->num_scalers; i++) {
+ ps_ctrl = I915_READ(SKL_PS_CTRL(crtc->pipe, i));
+ if (ps_ctrl & PS_SCALER_EN && !(ps_ctrl & PS_PLANE_SEL_MASK)) {
+ id = i;
+ pipe_config->pch_pfit.enabled = true;
+ pipe_config->pch_pfit.pos = I915_READ(SKL_PS_WIN_POS(crtc->pipe, i));
+ pipe_config->pch_pfit.size = I915_READ(SKL_PS_WIN_SZ(crtc->pipe, i));
+ break;
+ }
+ }
- if (tmp & PS_ENABLE) {
- pipe_config->pch_pfit.enabled = true;
- pipe_config->pch_pfit.pos = I915_READ(PS_WIN_POS(crtc->pipe));
- pipe_config->pch_pfit.size = I915_READ(PS_WIN_SZ(crtc->pipe));
+ scaler_state->scaler_id = id;
+ if (id >= 0) {
+ scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX);
+ } else {
+ scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX);
}
}
@@ -8607,6 +8629,9 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
skylake_get_pfit_config(crtc, pipe_config);
else
ironlake_get_pfit_config(crtc, pipe_config);
+ } else {
+ pipe_config->scaler_state.scaler_id = -1;
+ pipe_config->scaler_state.scaler_users &= ~(1 << SKL_CRTC_INDEX);
}
if (IS_HASWELL(dev))
@@ -11112,6 +11137,8 @@ intel_pipe_config_compare(struct drm_device *dev,
PIPE_CONF_CHECK_I(pch_pfit.size);
}
+ PIPE_CONF_CHECK_I(scaler_state.scaler_id);
+
/* BDW+ don't expose a synchronous way to read the state */
if (IS_HASWELL(dev))
PIPE_CONF_CHECK_I(ips_enabled);
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
