[PATCH 21/21 v2] drm/i915: Enable skylake sprite plane scaling using shared scalers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch enables skylake sprite plane display scaling using shared
scalers atomic desgin.

v2:
-use single copy of scaler limits (Matt)

Signed-off-by: Chandra Konduru <chandra.konduru@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_sprite.c |   79 +++++++++++++++++++++++++++--------
 1 file changed, 61 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 0194390..b4452bc 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -33,6 +33,7 @@
 #include <drm/drm_crtc.h>
 #include <drm/drm_fourcc.h>
 #include <drm/drm_rect.h>
+#include <drm/drm_atomic.h>
 #include <drm/drm_plane_helper.h>
 #include "intel_drv.h"
 #include <drm/i915_drm.h>
@@ -191,6 +192,8 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
 	const int plane = intel_plane->plane + 1;
 	u32 plane_ctl, stride_div;
 	int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
+	struct intel_crtc_state *crtc_state = to_intel_crtc(crtc)->config;
+	int scaler_id;
 
 	plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
 
@@ -274,16 +277,39 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
 	stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
 					       fb->pixel_format);
 
+	skl_detach_scaler(crtc, drm_plane);
+	scaler_id = to_intel_plane_state(drm_plane->state)->scaler_id;
+
 	/* Sizes are 0 based */
 	src_w--;
 	src_h--;
 	crtc_w--;
 	crtc_h--;
 
+	/* program plane scaler */
+	if (scaler_id >= 0) {
+		uint32_t ps_ctrl = 0;
+
+		DRM_DEBUG_KMS("plane = %d PS_PLANE_SEL(plane) = 0x%x\n", plane,
+			PS_PLANE_SEL(plane));
+		ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(plane) |
+			crtc_state->scaler_state.scalers[scaler_id].mode |
+			crtc_state->scaler_state.scalers[scaler_id].filter;
+		I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
+		I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
+		I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (crtc_x << 16) | crtc_y);
+		I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id),
+			((crtc_w + 1) << 16)|(crtc_h + 1));
+
+		I915_WRITE(PLANE_POS(pipe, plane), 0);
+		I915_WRITE(PLANE_SIZE(pipe, plane), (src_h << 16) | src_w);
+	} else {
+		I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
+		I915_WRITE(PLANE_SIZE(pipe, plane), (crtc_h << 16) | crtc_w);
+	}
+
 	I915_WRITE(PLANE_OFFSET(pipe, plane), (y << 16) | x);
 	I915_WRITE(PLANE_STRIDE(pipe, plane), fb->pitches[0] / stride_div);
-	I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
-	I915_WRITE(PLANE_SIZE(pipe, plane), (crtc_h << 16) | crtc_w);
 	I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
 	I915_WRITE(PLANE_SURF(pipe, plane), i915_gem_obj_ggtt_offset(obj));
 	POSTING_READ(PLANE_SURF(pipe, plane));
@@ -305,6 +331,8 @@ skl_disable_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc)
 	I915_WRITE(PLANE_CTL(pipe, plane), 0);
 	POSTING_READ(PLANE_CTL(pipe, plane));
 
+	skl_detach_scaler(crtc, drm_plane);
+
 	intel_update_sprite_watermarks(drm_plane, crtc, 0, 0, 0, false, false);
 }
 
@@ -1088,7 +1116,9 @@ static int
 intel_check_sprite_plane(struct drm_plane *plane,
 			 struct intel_plane_state *state)
 {
+	struct drm_device *dev = plane->dev;
 	struct intel_crtc *intel_crtc = to_intel_crtc(state->base.crtc);
+	struct intel_crtc_state *crtc_state;
 	struct intel_plane *intel_plane = to_intel_plane(plane);
 	struct drm_framebuffer *fb = state->base.fb;
 	int crtc_x, crtc_y;
@@ -1097,11 +1127,16 @@ intel_check_sprite_plane(struct drm_plane *plane,
 	struct drm_rect *src = &state->src;
 	struct drm_rect *dst = &state->dst;
 	const struct drm_rect *clip = &state->clip;
+	struct intel_crtc_scaler_state *scaler_state;
 	int hscale, vscale;
 	int max_scale, min_scale;
 	int pixel_size;
+	int ret;
 
 	intel_crtc = intel_crtc ? intel_crtc : to_intel_crtc(plane->crtc);
+	crtc_state = state->base.state ?
+		intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;
+	scaler_state = crtc_state ? &crtc_state->scaler_state : NULL;
 
 	if (!fb) {
 		state->visible = false;
@@ -1128,6 +1163,11 @@ intel_check_sprite_plane(struct drm_plane *plane,
 	max_scale = intel_plane->max_downscale << 16;
 	min_scale = intel_plane->can_scale ? 1 : (1 << 16);
 
+	if (INTEL_INFO(dev)->gen >= 9 && scaler_state && scaler_state->num_scalers) {
+		min_scale = 1;
+		max_scale = (100 << 16) / scaler_state->min_hsr;
+	}
+
 	drm_rect_rotate(src, fb->width << 16, fb->height << 16,
 			state->base.rotation);
 
@@ -1223,18 +1263,18 @@ intel_check_sprite_plane(struct drm_plane *plane,
 		width_bytes = ((src_x * pixel_size) & 63) +
 					src_w * pixel_size;
 
-		if (src_w > 2048 || src_h > 2048 ||
-		    width_bytes > 4096 || fb->pitches[0] > 4096) {
+		if (INTEL_INFO(dev)->gen < 9 && (src_w > 2048 || src_h > 2048 ||
+		    width_bytes > 4096 || fb->pitches[0] > 4096)) {
 			DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n");
 			return -EINVAL;
 		}
 	}
 
 	if (state->visible) {
-		src->x1 = src_x;
-		src->x2 = src_x + src_w;
-		src->y1 = src_y;
-		src->y2 = src_y + src_h;
+		src->x1 = src_x << 16;
+		src->x2 = (src_x + src_w) << 16;
+		src->y1 = src_y << 16;
+		src->y2 = (src_y + src_h) << 16;
 	}
 
 	dst->x1 = crtc_x;
@@ -1271,6 +1311,13 @@ finish:
 			intel_crtc->atomic.update_wm = true;
 	}
 
+	if (INTEL_INFO(dev)->gen >= 9) {
+		ret = skl_update_scaler_users(intel_crtc, crtc_state, intel_plane,
+			state, 0);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -1301,10 +1348,10 @@ intel_commit_sprite_plane(struct drm_plane *plane,
 			crtc_y = state->dst.y1;
 			crtc_w = drm_rect_width(&state->dst);
 			crtc_h = drm_rect_height(&state->dst);
-			src_x = state->src.x1;
-			src_y = state->src.y1;
-			src_w = drm_rect_width(&state->src);
-			src_h = drm_rect_height(&state->src);
+			src_x = state->src.x1 >> 16;
+			src_y = state->src.y1 >> 16;
+			src_w = drm_rect_width(&state->src) >> 16;
+			src_h = drm_rect_height(&state->src) >> 16;
 			intel_plane->update_plane(plane, crtc, fb, obj,
 						  crtc_x, crtc_y, crtc_w, crtc_h,
 						  src_x, src_y, src_w, src_h);
@@ -1493,12 +1540,8 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 		}
 		break;
 	case 9:
-		/*
-		 * FIXME: Skylake planes can be scaled (with some restrictions),
-		 * but this is for another time.
-		 */
-		intel_plane->can_scale = false;
-		intel_plane->max_downscale = 1;
+		intel_plane->can_scale = true;
+		intel_plane->max_downscale = 2; /* updated later */
 		intel_plane->update_plane = skl_update_plane;
 		intel_plane->disable_plane = skl_disable_plane;
 		intel_plane->update_colorkey = skl_update_colorkey;
-- 
1.7.9.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux