We make use of HW tracking for Selective update region and enable frame sync on
sink. We use hardware's hardcoded data values for frame sync and GTC.
Signed-off-by: Sonika Jindal <sonika.jindal@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 14 ++++++++++++++
drivers/gpu/drm/i915/intel_dp.c | 16 ++++++++++++++++
drivers/gpu/drm/i915/intel_drv.h | 2 ++
drivers/gpu/drm/i915/intel_psr.c | 30 +++++++++++++++++++++++++++++-
4 files changed, 61 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5b84ee6..7e4f6f0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2745,6 +2745,20 @@ enum skl_disp_power_wells {
#define EDP_PSR_DEBUG_MASK_MEMUP (1<<26)
#define EDP_PSR_DEBUG_MASK_HPD (1<<25)
+#define EDP_PSR2_CTL 0x6f900
+#define EDP_PSR2_ENABLE (1<<31)
+#define EDP_SU_TRACK_ENABLE (1<<30)
+#define EDP_MAX_SU_DISABLE_TIME(t) ((t)<<20)
+#define EDP_MAX_SU_DISABLE_TIME_MASK (0x1f<<20)
+#define EDP_PSR2_TP2_TIME_500 (0<<8)
+#define EDP_PSR2_TP2_TIME_100 (1<<8)
+#define EDP_PSR2_TP2_TIME_250 (2<<8)
+#define EDP_PSR2_TP2_TIME_50 (3<<8)
+#define EDP_PSR2_TP2_TIME_MASK (3<<8)
+#define EDP_PSR2_FRAME_BEFORE_SU_SHIFT 4
+#define EDP_PSR2_FRAME_BEFORE_SU_MASK (0xf<<4)
+#define EDP_PSR2_IDLE_MASK 0xf
+
/* VGA port control */
#define ADPA 0x61100
#define PCH_ADPA 0xe1100
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 3967af1..dedd8ad 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3786,6 +3786,22 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
dev_priv->psr.sink_support = true;
DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
}
+
+ if (INTEL_INFO(dev)->gen >= 9 &&
+ (intel_dp->psr_dpcd[0] & DP_PSR2_IS_SUPPORTED)) {
+ uint8_t frame_sync_cap;
+
+ dev_priv->psr.sink_support = true;
+ intel_dp_dpcd_read_wake(&intel_dp->aux,
+ DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
+ &frame_sync_cap, 1);
+ /* PSR2 needs frame sync as well */
+ if (frame_sync_cap) {
+ DRM_DEBUG_KMS("PSR2 supported on sink");
+ intel_dp->psr2_support = true;
+ } else
+ intel_dp->psr2_support = false;
+ }
}
/* Training Pattern 3 support, both source and sink */
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 8bb18e5..ed1b0a5 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -663,6 +663,8 @@ struct intel_dp {
struct intel_dp_mst_encoder *mst_encoders[I915_MAX_PIPES];
struct drm_dp_mst_topology_mgr mst_mgr;
+ bool psr2_support;
+
uint32_t (*get_aux_clock_divider)(struct intel_dp *dp, int index);
/*
* This function returns the value we have to program the AUX_CTL
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index b9f40c2..99dbc73 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -117,6 +117,19 @@ static void vlv_psr_setup_vsc(struct intel_dp *intel_dp)
I915_WRITE(VLV_VSCSDP(pipe), val);
}
+static void skl_psr_setup_su_vsc(struct intel_dp *intel_dp)
+{
+ struct edp_vsc_psr psr_vsc;
+
+ /* Prepare VSC Header for SU as per EDP 1.4 spec, Table 6.11 */
+ memset(&psr_vsc, 0, sizeof(psr_vsc));
+ psr_vsc.sdp_header.HB0 = 0;
+ psr_vsc.sdp_header.HB1 = 0x7;
+ psr_vsc.sdp_header.HB2 = 0x3;
+ psr_vsc.sdp_header.HB3 = 0xb;
+ intel_psr_write_vsc(intel_dp, &psr_vsc);
+}
+
static void hsw_psr_setup_vsc(struct intel_dp *intel_dp)
{
struct edp_vsc_psr psr_vsc;
@@ -165,6 +178,12 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
DP_PSR_ENABLE & ~DP_PSR_MAIN_LINK_ACTIVE);
+ /* Enable AUX frame sync at sink */
+ if (intel_dp->psr2_support)
+ drm_dp_dpcd_writeb(&intel_dp->aux,
+ DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
+ DP_AUX_FRAME_SYNC_ENABLE);
+
aux_data_reg = (INTEL_INFO(dev)->gen >= 9) ?
DPA_AUX_CH_DATA1 : EDP_PSR_AUX_DATA1(dev);
aux_ctl_reg = (INTEL_INFO(dev)->gen >= 9) ?
@@ -183,8 +202,10 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
val |= DP_AUX_CH_CTL_TIME_OUT_1600us;
val &= ~DP_AUX_CH_CTL_MESSAGE_SIZE_MASK;
val |= (sizeof(aux_msg) << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
- /* Use hardcoded data values for PSR */
+ /* Use hardcoded data values for PSR, frame sync and GTC */
val &= ~DP_AUX_CH_CTL_PSR_DATA_AUX_REG_SKL;
+ val &= ~DP_AUX_CH_CTL_FS_DATA_AUX_REG_SKL;
+ val &= ~DP_AUX_CH_CTL_GTC_DATA_AUX_REG_SKL;
I915_WRITE(aux_ctl_reg, val);
} else {
I915_WRITE(aux_ctl_reg,
@@ -255,6 +276,10 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT |
idle_frames << EDP_PSR_IDLE_FRAME_SHIFT |
EDP_PSR_ENABLE);
+
+ if (intel_dp->psr2_support)
+ I915_WRITE(EDP_PSR2_CTL, EDP_PSR2_ENABLE |
+ EDP_SU_TRACK_ENABLE | EDP_PSR2_TP2_TIME_100);
}
static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
@@ -364,6 +389,9 @@ void intel_psr_enable(struct intel_dp *intel_dp)
if (HAS_DDI(dev)) {
hsw_psr_setup_vsc(intel_dp);
+ if (intel_dp->psr2_support)
+ skl_psr_setup_su_vsc(intel_dp);
+
/* Avoid continuous PSR exit by masking memup and hpd */
I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP |
EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP);
--
1.7.10.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
