On Tue, Mar 17, 2015 at 11:39:51AM +0200, Imre Deak wrote:
> From: Shashank Sharma <shashank.sharma@xxxxxxxxx>
>
> This patch adds a hot plug interrupt handler function for BXT.
> What this function typically does is:
> 1. Check if hot plug is enabled from hot plug control register.
> 2. Call hpd_irq_handler with appropriate trigger to detect a
> plug storm and schedule a bottom half.
> 3. Clear sticky status bits in hot plug control register..
>
> Reviewed-by: Satheeshakrishna M <satheeshakrishna.m@xxxxxxxxx>
> Signed-off-by: Damien Lespiau <damien.lespiau@xxxxxxxxx>
> Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_irq.c | 45 +++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 43 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index a51c00e..4a2f85b 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -2227,6 +2227,38 @@ static irqreturn_t ironlake_irq_handler(int irq, void *arg)
> return ret;
> }
>
> +static void bxt_hpd_handler(struct drm_device *dev, uint32_t iir_status)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + uint32_t hp_control;
> + uint32_t hp_trigger;
> +
> + /* Get the status */
> + hp_trigger = iir_status & BXT_DE_PORT_HOTPLUG_MASK;
> + hp_control = I915_READ(BXT_HOTPLUG_CTL);
> +
> + /* Hotplug not enabled ? */
> + if (unlikely(!(hp_control & BXT_HOTPLUG_CTL_MASK))) {
> + DRM_ERROR("Interrupt when HPD disabled\n");
> + return;
> + }
> +
> + DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
> + hp_control & BXT_HOTPLUG_CTL_MASK);
> +
> + /* Check for HPD storm and schedule bottom half */
> + intel_hpd_irq_handler(dev, hp_trigger, hp_control, hpd_bxt);
> +
> + /*
> + * Todo: Save the hot plug status for bottom half before
> + * clearing the sticky status bits, else the status will be
> + * lost.
> + */
This seems to be ok, but code to handle long/short pulse in
intel_hpd_irq_handler seems to be missing. And we absolutely need that for
mst ports (I guess bxt has those?).
-Daniel
> +
> + /* Clear sticky bits in hpd status */
> + I915_WRITE(BXT_HOTPLUG_CTL, hp_control);
> +}
> +
> static irqreturn_t gen8_irq_handler(int irq, void *arg)
> {
> struct drm_device *dev = arg;
> @@ -2236,6 +2268,7 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
> uint32_t tmp = 0;
> enum pipe pipe;
> u32 aux_mask = GEN8_AUX_CHANNEL_A;
> + bool found = false;
>
> if (!intel_irqs_enabled(dev_priv))
> return IRQ_NONE;
> @@ -2276,9 +2309,17 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
> I915_WRITE(GEN8_DE_PORT_IIR, tmp);
> ret = IRQ_HANDLED;
>
> - if (tmp & aux_mask)
> + if (tmp & aux_mask) {
> dp_aux_irq_handler(dev);
> - else
> + found = true;
> + }
> +
> + if (tmp & BXT_DE_PORT_HOTPLUG_MASK) {
> + bxt_hpd_handler(dev, tmp);
> + found = true;
> + }
> +
> + if (!found)
> DRM_ERROR("Unexpected DE Port interrupt\n");
> }
> else
> --
> 2.1.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
