From: Satheeshakrishna M <satheeshakrishna.m@xxxxxxxxx>
Calculate and cache clock parameters. Follow bspec algorithm for HDMI.
Use precalculated values for DisplayPort linkrates.
v2: (imre)
- rebase against upstream crtc_state change
- use the existing CHV based helper instead of handrolling the same
Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@xxxxxxxxx> (v1)
Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_ddi.c | 129 +++++++++++++++++++++++++++++++++++++++
1 file changed, 129 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index bbc3da5..fa4f8f4 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1204,6 +1204,132 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
return true;
}
+/* bxt clock parameters */
+struct bxt_clk_div {
+ uint32_t p1;
+ uint32_t p2;
+ uint32_t m2_int;
+ uint32_t m2_frac;
+ bool m2_frac_en;
+ uint32_t n;
+ uint32_t prop_coef;
+ uint32_t int_coef;
+ uint32_t gain_ctl;
+ uint32_t targ_cnt;
+ uint32_t lanestagger;
+};
+
+/* pre-calculated values for DP linkrates */
+static struct bxt_clk_div bxt_dp_clk_val[7] = {
+ /* 162 */ {4, 2, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd},
+ /* 270 */ {4, 1, 27, 0, 0, 1, 3, 8, 1, 9, 0xd},
+ /* 540 */ {2, 1, 27, 0, 0, 1, 3, 8, 1, 9, 0x18},
+ /* 216 */ {3, 2, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd},
+ /* 243 */ {4, 1, 24, 1258291, 1, 1, 5, 11, 2, 9, 0xd},
+ /* 324 */ {4, 1, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd},
+ /* 432 */ {3, 1, 32, 1677722, 1, 1, 5, 11, 2, 9, 0x18}
+};
+
+static bool
+bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
+ struct intel_crtc_state *crtc_state,
+ struct intel_encoder *intel_encoder,
+ int clock)
+{
+ struct intel_shared_dpll *pll;
+ struct bxt_clk_div clk_div = {0};
+
+ if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
+ intel_clock_t best_clock;
+
+ /* Calculate HDMI div */
+ /*
+ * FIXME: tie the following calculation into
+ * i9xx_crtc_compute_clock
+ */
+ if (!bxt_find_best_dpll(intel_crtc, clock, &best_clock)) {
+ DRM_DEBUG_DRIVER("no PLL dividers found for clock %d pipe %c\n",
+ clock, pipe_name(intel_crtc->pipe));
+ return false;
+ }
+
+ clk_div.p1 = best_clock.p1;
+ clk_div.p2 = best_clock.p2;
+ WARN_ON(best_clock.m1 != 2);
+ clk_div.n = best_clock.n;
+ clk_div.m2_int = best_clock.m2 >> 22;
+ clk_div.m2_frac = best_clock.m2 & ((1 << 22) - 1);
+ clk_div.m2_frac_en = clk_div.m2_frac != 0;
+
+ /* FIXME: set coef, gain, targcnt based on freq band */
+ clk_div.prop_coef = 5;
+ clk_div.int_coef = 11;
+ clk_div.gain_ctl = 2;
+ clk_div.targ_cnt = 9;
+ if (clock > 270000)
+ clk_div.lanestagger = 0x18;
+ else if (clock > 135000)
+ clk_div.lanestagger = 0x0d;
+ else if (clock > 67000)
+ clk_div.lanestagger = 0x07;
+ else if (clock > 33000)
+ clk_div.lanestagger = 0x04;
+ else
+ clk_div.lanestagger = 0x02;
+ } else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
+ intel_encoder->type == INTEL_OUTPUT_EDP) {
+ struct drm_encoder *encoder = &intel_encoder->base;
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ switch (intel_dp->link_bw) {
+ case DP_LINK_BW_1_62:
+ clk_div = bxt_dp_clk_val[0];
+ break;
+ case DP_LINK_BW_2_7:
+ clk_div = bxt_dp_clk_val[1];
+ break;
+ case DP_LINK_BW_5_4:
+ clk_div = bxt_dp_clk_val[2];
+ break;
+ default:
+ clk_div = bxt_dp_clk_val[0];
+ DRM_ERROR("Unknown link rate\n");
+ }
+ }
+
+ crtc_state->dpll_hw_state.ebb0 =
+ PORT_PLL_P1(clk_div.p1) | PORT_PLL_P2(clk_div.p2);
+ crtc_state->dpll_hw_state.pll0 = clk_div.m2_int;
+ crtc_state->dpll_hw_state.pll1 = PORT_PLL_N(clk_div.n);
+ crtc_state->dpll_hw_state.pll2 = clk_div.m2_frac;
+
+ if (clk_div.m2_frac_en)
+ crtc_state->dpll_hw_state.pll3 =
+ PORT_PLL_M2_FRAC_ENABLE;
+
+ crtc_state->dpll_hw_state.pll6 =
+ clk_div.prop_coef | PORT_PLL_INT_COEFF(clk_div.int_coef);
+ crtc_state->dpll_hw_state.pll6 |=
+ PORT_PLL_GAIN_CTL(clk_div.gain_ctl);
+
+ crtc_state->dpll_hw_state.pll8 = clk_div.targ_cnt;
+
+ crtc_state->dpll_hw_state.pcsdw12 =
+ LANESTAGGER_STRAP_OVRD | clk_div.lanestagger;
+
+ pll = intel_get_shared_dpll(intel_crtc, crtc_state);
+ if (pll == NULL) {
+ DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
+ pipe_name(intel_crtc->pipe));
+ return false;
+ }
+
+ /* shared DPLL id 0 is DPLL A */
+ crtc_state->ddi_pll_sel = pll->id;
+
+ return true;
+}
+
/*
* Tries to find a *shared* PLL for the CRTC and store it in
* intel_crtc->ddi_pll_sel.
@@ -1222,6 +1348,9 @@ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc,
if (IS_SKYLAKE(dev))
return skl_ddi_pll_select(intel_crtc, crtc_state,
intel_encoder, clock);
+ else if (IS_BROXTON(dev))
+ return bxt_ddi_pll_select(intel_crtc, crtc_state,
+ intel_encoder, clock);
else
return hsw_ddi_pll_select(intel_crtc, crtc_state,
intel_encoder, clock);
--
2.1.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
