From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
"P1273_DPLL_Programming Spreadsheet.xlsm" lists a boatload of
frequencies for eDP. Try to use them all.
For now I've decided not to add hardcoded DPLL dividers for these cases
since chv_find_best_dpll() works just fine.
I've not actually tested any of these since I don't have an eDP 1.4 panel.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index a088186..8392bd3 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -87,6 +87,9 @@ static const struct dp_link_dpll chv_dpll[] = {
/* Skylake supports following rates */
static const int gen9_rates[] = { 162000, 216000, 270000,
324000, 432000, 540000 };
+static const int chv_rates[] = { 162000, 202500, 210000, 216000,
+ 243000, 270000, 324000, 405000,
+ 420000, 432000, 540000 };
static const int default_rates[] = { 162000, 270000, 540000 };
/**
@@ -1148,6 +1151,9 @@ intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
if (INTEL_INFO(dev)->gen >= 9) {
*source_rates = gen9_rates;
return ARRAY_SIZE(gen9_rates);
+ } else if (IS_CHERRYVIEW(dev)) {
+ *source_rates = chv_rates;
+ return ARRAY_SIZE(chv_rates);
}
*source_rates = default_rates;
--
2.0.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
