Re: [PATCH 3/4] drm/i915/skl: Add support for edp 1.4 intermediate frequencies

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Feb 21, 2015 at 11:12:12AM +0530, Sonika Jindal wrote:
> eDp 1.4 supports custom frequencies.
> Skylake supports following intermediate frequencies : 3.24 GHz, 2.16 GHz and
> 4.32 GHz along with usual LBR, HBR and HBR2 frequencies.
> Read sink supported frequencies and get common frequencies from sink and
> source and use these for link training.
> 
> v2: Rebased, removed calculation of min_clock since for edp it is taken as
> max_clock (as per comment).
> v3: Keeping single array for link rates (Satheesh)
> v4: Setting LINK_BW_SET to 0 when setting LINK_RATE_SET (Satheesh)
> v5: Some minor nits (Ville)
> v6: Keeping separate arrays for source and sink rates (Ville)
> 
> Signed-off-by: Sonika Jindal <sonika.jindal@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/intel_ddi.c |    9 +++
>  drivers/gpu/drm/i915/intel_dp.c  |  113 +++++++++++++++++++++++++++++++++++---
>  drivers/gpu/drm/i915/intel_drv.h |    1 +
>  3 files changed, 115 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 4d8c38d..db00db8 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -803,9 +803,18 @@ static void skl_ddi_clock_get(struct intel_encoder *encoder,
>  		case DPLL_CRTL1_LINK_RATE_810:
>  			link_clock = 81000;
>  			break;
> +		case DPLL_CRTL1_LINK_RATE_1080:
> +			link_clock = 108000;
> +			break;
>  		case DPLL_CRTL1_LINK_RATE_1350:
>  			link_clock = 135000;
>  			break;
> +		case DPLL_CRTL1_LINK_RATE_1620:
> +			link_clock = 162000;
> +			break;
> +		case DPLL_CRTL1_LINK_RATE_2160:
> +			link_clock = 216000;
> +			break;
>  		case DPLL_CRTL1_LINK_RATE_2700:
>  			link_clock = 270000;
>  			break;
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 72deac6..cf7a0f5 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -83,6 +83,11 @@ static const struct dp_link_dpll chv_dpll[] = {
>  	{ DP_LINK_BW_5_4,	/* m2_int = 27, m2_fraction = 0 */
>  		{ .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
>  };
> +/* Skylake supports following rates */
> +static const uint32_t gen9_rates[] = { 162000, 216000, 270000, 324000,
> +					432000, 540000 };
> +
> +static const uint32_t default_rates[] = { 162000, 270000, 540000 };
>  
>  /**
>   * is_edp - is the given port attached to an eDP panel (either CPU or PCH)
> @@ -1143,6 +1148,25 @@ intel_read_sink_rates(struct intel_dp *intel_dp, uint32_t *sink_rates)
>  	return i;
>  }
>  
> +static int
> +intel_read_source_rates(struct intel_dp *intel_dp, uint32_t *source_rates)
> +{
> +	struct drm_device *dev = intel_dp_to_dev(intel_dp);
> +	int i;
> +	int max_default_rate;
> +
> +	if (INTEL_INFO(dev)->gen >= 9 && intel_dp->supported_rates[0]) {
> +		for (i = 0; i < ARRAY_SIZE(gen9_rates); ++i)
> +			source_rates[i] = gen9_rates[i];
> +	} else {
> +		/* Index of the max_link_bw supported + 1 */
> +		max_default_rate = (intel_dp_max_link_bw(intel_dp) >> 3) + 1;
> +		for (i = 0; i < max_default_rate; ++i)
> +			source_rates[i] = default_rates[i];
> +	}
> +	return i;
> +}
> +
>  static void
>  intel_dp_set_clock(struct intel_encoder *encoder,
>  		   struct intel_crtc_state *pipe_config, int link_bw)
> @@ -1176,6 +1200,45 @@ intel_dp_set_clock(struct intel_encoder *encoder,
>  	}
>  }
>  
> +static int intel_supported_rates(const uint32_t *source_rates, int source_len,
> +const uint32_t *sink_rates, int sink_len, uint32_t *supported_rates)
> +{
> +	int i = 0, j = 0, k = 0;
> +
> +	/* For panels with edp version less than 1.4 */
> +	if (sink_len == 0) {
> +		for (i = 0; i < source_len; ++i)
> +			supported_rates[i] = source_rates[i];
> +		return source_len;
> +	}
> +
> +	/* For edp1.4 panels, find the common rates between source and sink */
> +	while (i < source_len && j < sink_len) {
> +		if (source_rates[i] == sink_rates[j]) {
> +			supported_rates[k] = source_rates[i];
> +			++k;
> +			++i;
> +			++j;
> +		} else if (source_rates[i] < sink_rates[j]) {
> +			++i;
> +		} else {
> +			++j;
> +		}
> +	}
> +	return k;
> +}
> +
> +static int rate_to_index(uint32_t find, const uint32_t *rates)
> +{
> +	int i = 0;
> +
> +	for (i = 0; i < DP_MAX_SUPPORTED_RATES; ++i)
> +		if (find == rates[i])
> +			break;
> +
> +	return i;
> +}
> +
>  bool
>  intel_dp_compute_config(struct intel_encoder *encoder,
>  			struct intel_crtc_state *pipe_config)
> @@ -1192,10 +1255,25 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  	int max_lane_count = intel_dp_max_lane_count(intel_dp);
>  	/* Conveniently, the link BW constants become indices with a shift...*/
>  	int min_clock = 0;
> -	int max_clock = intel_dp_max_link_bw(intel_dp) >> 3;
> +	int max_clock;
>  	int bpp, mode_rate;
> -	static int bws[] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 };
>  	int link_avail, link_clock;
> +	uint32_t sink_rates[8];
> +	uint32_t supported_rates[8] = {0};
> +	uint32_t source_rates[8];
> +	int source_len, sink_len, supported_len;
> +
> +	sink_len = intel_read_sink_rates(intel_dp, sink_rates);
> +
> +	source_len = intel_read_source_rates(intel_dp, source_rates);
> +
> +	supported_len = intel_supported_rates(source_rates, source_len,
> +				sink_rates, sink_len, supported_rates);
> +
> +	/* No common link rates between source and sink */
> +	WARN_ON(supported_len <= 0);
> +
> +	max_clock = supported_len - 1;
>  
>  	if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A)
>  		pipe_config->has_pch_encoder = true;
> @@ -1219,8 +1297,8 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  		return false;
>  
>  	DRM_DEBUG_KMS("DP link computation with max lane count %i "
> -		      "max bw %02x pixel clock %iKHz\n",
> -		      max_lane_count, bws[max_clock],
> +		      "max bw %d pixel clock %iKHz\n",
> +		      max_lane_count, supported_rates[max_clock],
>  		      adjusted_mode->crtc_clock);
>  
>  	/* Walk through all bpp values. Luckily they're all nicely spaced with 2
> @@ -1249,8 +1327,11 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  						   bpp);
>  
>  		for (clock = min_clock; clock <= max_clock; clock++) {
> -			for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) {
> -				link_clock = drm_dp_bw_code_to_link_rate(bws[clock]);
> +			for (lane_count = min_lane_count;
> +				lane_count <= max_lane_count;
> +				lane_count <<= 1) {
> +
> +				link_clock = supported_rates[clock];
>  				link_avail = intel_dp_max_data_rate(link_clock,
>  								    lane_count);
>  
> @@ -1279,10 +1360,19 @@ found:
>  	if (intel_dp->color_range)
>  		pipe_config->limited_color_range = true;
>  
> -	intel_dp->link_bw = bws[clock];
>  	intel_dp->lane_count = lane_count;
> +
> +	intel_dp->link_bw =
> +		drm_dp_link_rate_to_bw_code(supported_rates[clock]);
> +
> +	if (INTEL_INFO(dev)->gen >= 9 && intel_dp->supported_rates[0]) {
> +		intel_dp->rate_select =
> +			rate_to_index(supported_rates[clock], sink_rates);
> +		intel_dp->link_bw = 0;
> +	}
> +
>  	pipe_config->pipe_bpp = bpp;
> -	pipe_config->port_clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
> +	pipe_config->port_clock = supported_rates[clock];
>  
>  	DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n",
>  		      intel_dp->link_bw, intel_dp->lane_count,
> @@ -3392,6 +3482,13 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
>  	if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
>  		link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
>  	drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2);
> +	if (INTEL_INFO(dev)->gen >= 9 && intel_dp->supported_rates[0]) {
> +		link_config[0] = 0;
> +		drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET,
> +				link_config, 1);

LINK_BW_SET was already written just above. So this second write isn't
needed.

With that fixed this looks pretty good to me, so
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

> +		drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET,
> +				&intel_dp->rate_select, 1);
> +	}
>  
>  	link_config[0] = 0;
>  	link_config[1] = DP_SET_ANSI_8B10B;
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 24e5411..b54b5f0 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -598,6 +598,7 @@ struct intel_dp {
>  	uint32_t color_range;
>  	bool color_range_auto;
>  	uint8_t link_bw;
> +	uint8_t rate_select;
>  	uint8_t lane_count;
>  	uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
>  	uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
> -- 
> 1.7.10.4

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux