From: Tim Gore <tim.gore@xxxxxxxxx>
The gem_render_tiled_blits test tends to get oom killed
on low memory (< 4GB) Android systems. This is because the
test tries to allocate (sysinfo.totalram * 9 / 10) in
buffer objects and the remaining 10% of memory is not
always enough for the Android system.
A similar issue with gem_render_linear_blits was resolved
by creating several subtests. A "basic" subtest that uses
minimal memory buffers to test the basic operation, and
two stress tests which are skipped if there is insufficient
memory. The first stress test uses more memory than the
graphics apperture and the second uses enough to ensure
that swap space is used (if present).
This patch makes the same changes to gem_render_tiled_blits.
Signed-off-by: Tim Gore <tim.gore@xxxxxxxxx>
---
tests/gem_render_tiled_blits.c | 67 +++++++++++++++++++++++++++---------------
1 file changed, 43 insertions(+), 24 deletions(-)
diff --git a/tests/gem_render_tiled_blits.c b/tests/gem_render_tiled_blits.c
index dc22529..ff94696 100644
--- a/tests/gem_render_tiled_blits.c
+++ b/tests/gem_render_tiled_blits.c
@@ -94,21 +94,16 @@ check_bo(struct intel_batchbuffer *batch, struct igt_buf *buf, uint32_t val)
dri_bo_unmap(linear);
}
-int main(int argc, char **argv)
+static void run_test (int fd, int count)
{
drm_intel_bufmgr *bufmgr;
struct intel_batchbuffer *batch;
uint32_t *start_val;
struct igt_buf *buf;
uint32_t start = 0;
- int i, j, fd, count;
+ int i, j;
uint32_t devid;
- igt_simple_init(argc, argv);
-
- igt_skip_on_simulation();
-
- fd = drm_open_any();
devid = intel_get_drm_devid(fd);
render_copy = igt_get_render_copyfunc(devid);
@@ -124,23 +119,6 @@ int main(int argc, char **argv)
drm_intel_bufmgr_gem_set_vma_cache_size(bufmgr, 32);
batch = intel_batchbuffer_alloc(bufmgr, devid);
- count = 0;
- if (argc > 1)
- count = atoi(argv[1]);
- if (count == 0)
- count = 3 * gem_aperture_size(fd) / SIZE / 2;
- else if (count < 2) {
- igt_warn("count must be >= 2\n");
- return 1;
- }
-
- if (count > intel_get_total_ram_mb() * 9 / 10) {
- count = intel_get_total_ram_mb() * 9 / 10;
- igt_info("not enough RAM to run test, reducing buffer count\n");
- }
-
- igt_info("Using %d 1MiB buffers\n", count);
-
linear = drm_intel_bo_alloc(bufmgr, "linear", WIDTH*HEIGHT*4, 0);
if (snoop) {
gem_set_caching(fd, linear->handle, 1);
@@ -211,5 +189,46 @@ int main(int argc, char **argv)
for (i = 0; i < count; i++)
check_bo(batch, &buf[i], start_val[i]);
+ /* release resources */
+ drm_intel_bo_unreference(linear);
+ for (i = 0; i < count; i++) {
+ drm_intel_bo_unreference(buf[i].bo);
+ }
+ intel_batchbuffer_free(batch);
+ drm_intel_bufmgr_destroy(bufmgr);
+}
+
+
+int main(int argc, char **argv)
+{
+ int fd = 0;
+ int count = 0;
+
+ igt_subtest_init(argc, argv);
+ igt_fixture {
+ fd = drm_open_any();
+ }
+
+ igt_subtest("basic") {
+ run_test(fd, 2);
+ }
+
+ /* the rest of the tests are too long for simulation */
+ igt_skip_on_simulation();
+
+ igt_subtest("apperture-thrash") {
+ count = 3 * gem_aperture_size(fd) / SIZE / 2;
+ intel_require_memory(count, SIZE, CHECK_RAM);
+ run_test(fd, count);
+ }
+
+ igt_subtest("swap-thrash") {
+ uint64_t swap_mb = intel_get_total_swap_mb();
+ igt_require(swap_mb > 0);
+ count = ((intel_get_avail_ram_mb() + (swap_mb / 2)) * 1024*1024) / SIZE;
+ intel_require_memory(count, SIZE, CHECK_RAM | CHECK_SWAP);
+ run_test(fd, count);
+ }
+
igt_exit();
}
--
2.3.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
