[PATCH 3/7] drm/i915: Configure GEN6_RP_DOWN_TIMEOUT on CHV

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

CherryViewA0_iGfx_BIOS_DRIVER_PUNIT_spec_y14w28d5 tells us not to enable
the RP down timeout interrupt, and says that the timeout value is hence
not used. We do enable that interrupt currently though, so leaving the
timeout as 0 results in very poor performance as the GPU frequency keeps
dropping constantly. So just program the register with the recommended
value.

Leaving the interrupt enabled doesn't seem to do any harm so far. So
I've decided to leave it on for now, just to avoid making CHV a
special case.

This fixes the performance regression from:
 commit 5a0afd4b78ec23f27f5d486ac3d102c2e8d66bd7
 Author: Deepak S <deepak.s@xxxxxxxxxxxxxxx>
 Date:   Sat Dec 13 11:43:27 2014 +0530

    drm/i915/chv: Use timeout mode for RC6 on chv

Cc: Deepak S <deepak.s@xxxxxxxxxxxxxxx>
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_pm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index ee9a5f9..8c7a07d 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4743,6 +4743,7 @@ static void cherryview_enable_rps(struct drm_device *dev)
 	I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
 
 	/* 4 Program defaults and thresholds for RPS*/
+	I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
 	I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
 	I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
 	I915_WRITE(GEN6_RP_UP_EI, 66000);
-- 
2.0.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux