No functional changes. This reorg will allow to do some
operations like suspend/resume and dpms off/on at some
specific points where we know PSR state.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
---
tests/kms_psr_sink_crc.c | 141 +++++++++++++++++++++++++----------------------
1 file changed, 75 insertions(+), 66 deletions(-)
diff --git a/tests/kms_psr_sink_crc.c b/tests/kms_psr_sink_crc.c
index 285600f..4e4a4cd 100644
--- a/tests/kms_psr_sink_crc.c
+++ b/tests/kms_psr_sink_crc.c
@@ -85,6 +85,8 @@ typedef struct {
igt_plane_t *primary, *sprite, *cursor;
int mod_size;
int psr_wakeup_time;
+ drmModeModeInfo *mode;
+ igt_output_t *output;
} data_t;
static void create_cursor_fb(data_t *data)
@@ -102,9 +104,32 @@ static void create_cursor_fb(data_t *data)
igt_assert(cairo_status(cr) == 0);
}
+
+static void setup_output(data_t *data)
+{
+ igt_display_t *display = &data->display;
+ igt_output_t *output;
+
+ for_each_connected_output(display, output) {
+ drmModeConnectorPtr c = output->config.connector;
+
+ if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
+ c->connection != DRM_MODE_CONNECTED)
+ continue;
+
+ igt_output_set_pipe(output, PIPE_ANY);
+ data->crtc_id = output->config.crtc->crtc_id;
+ data->output = output;
+ data->mode = igt_output_get_mode(output);
+
+ return;
+ }
+}
+
static void display_init(data_t *data)
{
igt_display_init(&data->display, data->drm_fd);
+ setup_output(data);
}
static void display_fini(data_t *data)
@@ -337,7 +362,7 @@ static void assert_or_manual(bool condition, const char *expected)
igt_assert(igt_interactive_debug || condition);
}
-static void test_crc(data_t *data)
+static void run_test(data_t *data)
{
uint32_t handle = data->fb_white.gem_handle;
igt_plane_t *test_plane;
@@ -346,18 +371,10 @@ static void test_crc(data_t *data)
char crc[12];
const char *expected = "";
- igt_plane_set_fb(data->primary, &data->fb_green);
- igt_display_commit(&data->display);
-
/* Confirm that screen became Green */
get_sink_crc(data, ref_crc);
assert_or_manual(is_green(ref_crc), "screen GREEN");
- /* Confirm screen stays Green after PSR got active */
- igt_assert(wait_psr_entry(data));
- get_sink_crc(data, ref_crc);
- assert_or_manual(is_green(ref_crc), "screen GREEN");
-
/* Setting a secondary fb/plane */
switch (data->test_plane) {
case PRIMARY: default: test_plane = data->primary; break;
@@ -463,75 +480,58 @@ static void test_cleanup(data_t *data) {
igt_remove_fb(data->drm_fd, &data->fb_white);
}
-static void run_test(data_t *data)
+static void setup_test_plane(data_t *data)
{
- igt_display_t *display = &data->display;
- igt_output_t *output;
- drmModeModeInfo *mode;
uint32_t white_h, white_v;
- for_each_connected_output(display, output) {
- drmModeConnectorPtr c = output->config.connector;
+ igt_create_color_fb(data->drm_fd,
+ data->mode->hdisplay, data->mode->vdisplay,
+ DRM_FORMAT_XRGB8888, I915_TILING_X,
+ 0.0, 1.0, 0.0,
+ &data->fb_green);
- if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
- c->connection != DRM_MODE_CONNECTED)
- continue;
+ data->primary = igt_output_get_plane(data->output, IGT_PLANE_PRIMARY);
+ igt_plane_set_fb(data->primary, NULL);
- igt_output_set_pipe(output, PIPE_ANY);
- data->crtc_id = output->config.crtc->crtc_id;
+ white_h = data->mode->hdisplay;
+ white_v = data->mode->vdisplay;
- mode = igt_output_get_mode(output);
+ /* Ignoring pitch and bpp to avoid changing full screen */
+ data->mod_size = white_h * white_v;
+ switch (data->test_plane) {
+ case SPRITE:
+ data->sprite = igt_output_get_plane(data->output,
+ IGT_PLANE_2);
+ igt_plane_set_fb(data->sprite, NULL);
+ /* To make it different for human eyes let's make
+ * sprite visible in only one quarter of the primary
+ */
+ white_h = white_h/2;
+ white_v = white_v/2;
+ case PRIMARY:
igt_create_color_fb(data->drm_fd,
- mode->hdisplay, mode->vdisplay,
+ white_h, white_v,
DRM_FORMAT_XRGB8888, I915_TILING_X,
- 0.0, 1.0, 0.0,
- &data->fb_green);
-
- data->primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
- igt_plane_set_fb(data->primary, NULL);
-
- white_h = mode->hdisplay;
- white_v = mode->vdisplay;
-
- /* Ignoring pitch and bpp to avoid changing full screen */
- data->mod_size = white_h * white_v;
-
- switch (data->test_plane) {
- case SPRITE:
- data->sprite = igt_output_get_plane(output,
- IGT_PLANE_2);
- igt_plane_set_fb(data->sprite, NULL);
- /* To make it different for human eyes let's make
- * sprite visible in only one quarter of the primary
- */
- white_h = white_h/2;
- white_v = white_v/2;
- case PRIMARY:
- igt_create_color_fb(data->drm_fd,
- white_h, white_v,
- DRM_FORMAT_XRGB8888, I915_TILING_X,
- 1.0, 1.0, 1.0,
- &data->fb_white);
- break;
- case CURSOR:
- data->cursor = igt_output_get_plane(output,
- IGT_PLANE_CURSOR);
- igt_plane_set_fb(data->cursor, NULL);
- create_cursor_fb(data);
- igt_plane_set_position(data->cursor, 0, 0);
-
- /* Cursor is 64 x 64, ignoring pitch and bbp again */
- data->mod_size = 64 * 64;
- break;
- }
+ 1.0, 1.0, 1.0,
+ &data->fb_white);
+ break;
+ case CURSOR:
+ data->cursor = igt_output_get_plane(data->output,
+ IGT_PLANE_CURSOR);
+ igt_plane_set_fb(data->cursor, NULL);
+ create_cursor_fb(data);
+ igt_plane_set_position(data->cursor, 0, 0);
- igt_display_commit(&data->display);
+ /* Cursor is 64 x 64, ignoring pitch and bbp again */
+ data->mod_size = 64 * 64;
+ break;
+ }
- test_crc(data);
+ igt_display_commit(&data->display);
- test_cleanup(data);
- }
+ igt_plane_set_fb(data->primary, &data->fb_green);
+ igt_display_commit(&data->display);
}
static int opt_handler(int opt, int opt_index)
@@ -580,7 +580,10 @@ int main(int argc, char *argv[])
igt_subtest_f("primary_%s", op_str(op)) {
data.test_plane = PRIMARY;
data.op = op;
+ setup_test_plane(&data);
+ igt_assert(wait_psr_entry(&data));
run_test(&data);
+ test_cleanup(&data);
}
}
@@ -588,7 +591,10 @@ int main(int argc, char *argv[])
igt_subtest_f("sprite_%s", op_str(op)) {
data.test_plane = SPRITE;
data.op = op;
+ setup_test_plane(&data);
+ igt_assert(wait_psr_entry(&data));
run_test(&data);
+ test_cleanup(&data);
}
}
@@ -596,7 +602,10 @@ int main(int argc, char *argv[])
igt_subtest_f("cursor_%s", op_str(op)) {
data.test_plane = CURSOR;
data.op = op;
+ setup_test_plane(&data);
+ igt_assert(wait_psr_entry(&data));
run_test(&data);
+ test_cleanup(&data);
}
}
--
2.1.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
