From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> The dev_priv->display.hpd_irq_setup hook is optional, so we can move the I915_HAS_HOTPLUG() check out of i915_hpd_irq_setup() and only set up the hook when hotplug support is present. Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/i915_irq.c | 42 ++++++++++++++++++++--------------------- 1 file changed, 20 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 1d52ae9..8fe5a87 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -4145,26 +4145,24 @@ static void i915_hpd_irq_setup(struct drm_device *dev) assert_spin_locked(&dev_priv->irq_lock); - if (I915_HAS_HOTPLUG(dev)) { - hotplug_en = I915_READ(PORT_HOTPLUG_EN); - hotplug_en &= ~HOTPLUG_INT_EN_MASK; - /* Note HDMI and DP share hotplug bits */ - /* enable bits are the same for all generations */ - for_each_intel_encoder(dev, intel_encoder) - if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED) - hotplug_en |= hpd_mask_i915[intel_encoder->hpd_pin]; - /* Programming the CRT detection parameters tends - to generate a spurious hotplug event about three - seconds later. So just do it once. - */ - if (IS_G4X(dev)) - hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64; - hotplug_en &= ~CRT_HOTPLUG_VOLTAGE_COMPARE_MASK; - hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; - - /* Ignore TV since it's buggy */ - I915_WRITE(PORT_HOTPLUG_EN, hotplug_en); - } + hotplug_en = I915_READ(PORT_HOTPLUG_EN); + hotplug_en &= ~HOTPLUG_INT_EN_MASK; + /* Note HDMI and DP share hotplug bits */ + /* enable bits are the same for all generations */ + for_each_intel_encoder(dev, intel_encoder) + if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED) + hotplug_en |= hpd_mask_i915[intel_encoder->hpd_pin]; + /* Programming the CRT detection parameters tends + to generate a spurious hotplug event about three + seconds later. So just do it once. + */ + if (IS_G4X(dev)) + hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64; + hotplug_en &= ~CRT_HOTPLUG_VOLTAGE_COMPARE_MASK; + hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; + + /* Ignore TV since it's buggy */ + I915_WRITE(PORT_HOTPLUG_EN, hotplug_en); } static irqreturn_t i965_irq_handler(int irq, void *arg) @@ -4428,14 +4426,14 @@ void intel_irq_init(struct drm_i915_private *dev_priv) dev->driver->irq_postinstall = i915_irq_postinstall; dev->driver->irq_uninstall = i915_irq_uninstall; dev->driver->irq_handler = i915_irq_handler; - dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup; } else { dev->driver->irq_preinstall = i965_irq_preinstall; dev->driver->irq_postinstall = i965_irq_postinstall; dev->driver->irq_uninstall = i965_irq_uninstall; dev->driver->irq_handler = i965_irq_handler; - dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup; } + if (I915_HAS_HOTPLUG(dev_priv)) + dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup; dev->driver->enable_vblank = i915_enable_vblank; dev->driver->disable_vblank = i915_disable_vblank; } -- 2.0.5 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx