[RFC 4/4] drm/i915: Enable PMIC panel control as drm_panel for DSI

[Shobhit Kumar <shobhit.kumar@xxxxxxxxx>]

This initialize the drm_panel based on PMIC driver and uses drm_panel_*
for controlling the panel enable/disable states

Signed-off-by: Shobhit Kumar <shobhit.kumar@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_dsi.c           | 20 ++++++++++++++++----
 drivers/gpu/drm/i915/intel_dsi.h           |  6 ++++++
 drivers/gpu/drm/i915/intel_dsi_panel_vbt.c |  1 +
 3 files changed, 23 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 42b6d6f..3a56674 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -26,6 +26,7 @@
 #include <drm/drmP.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_edid.h>
+#include <drm/drm_panel.h>
 #include <drm/i915_drm.h>
 #include <linux/slab.h>
 #include "i915_drv.h"
@@ -230,6 +231,8 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder)
 
 	DRM_DEBUG_KMS("\n");
 
+	drm_panel_enable(intel_dsi->panel);
+
 	/* Disable DPOunit clock gating, can stall pipe
 	 * and we need DPLL REFA always enabled */
 	tmp = I915_READ(DPLL(pipe));
@@ -247,8 +250,6 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder)
 	/* put device in ready state */
 	intel_dsi_device_ready(encoder);
 
-	msleep(intel_dsi->panel_on_delay);
-
 	if (intel_dsi->dev.dev_ops->panel_reset)
 		intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev);
 
@@ -390,8 +391,7 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder)
 	if (intel_dsi->dev.dev_ops->disable_panel_power)
 		intel_dsi->dev.dev_ops->disable_panel_power(&intel_dsi->dev);
 
-	msleep(intel_dsi->panel_off_delay);
-	msleep(intel_dsi->panel_pwr_cycle_delay);
+	drm_panel_disable(intel_dsi->panel);
 }
 
 static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
@@ -896,6 +896,18 @@ void intel_dsi_init(struct drm_device *dev)
 	fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
 	intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
 
+	/* Initialize the PMIC based drm_panel if available on the platform */
+	if (intel_dsi->pps_blc == PPS_BLC_PMIC) {
+		intel_dsi->panel = intel_panel_pmic_init(dev->dev,
+							&intel_dsi->pinfo);
+		if (!intel_dsi->panel) {
+			DRM_ERROR("Panel init fail !! EN/DISABLE will not work leaking power !!\n");
+			return;
+		}
+
+		drm_panel_attach(intel_dsi->panel, connector);
+	}
+
 	return;
 
 err:
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index 8b20f76..641c80d 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -33,6 +33,9 @@
 #define DSI_DUAL_LINK_FRONT_BACK	1
 #define DSI_DUAL_LINK_PIXEL_ALT		2
 
+#define PPS_BLC_PMIC	0
+#define PPS_BLC_SOC	1
+
 struct intel_dsi_device {
 	unsigned int panel_id;
 	const char *name;
@@ -83,6 +86,8 @@ struct intel_dsi {
 
 	struct intel_connector *attached_connector;
 
+	struct drm_panel *panel;
+
 	/* bit mask of ports being driven */
 	u16 ports;
 
@@ -116,6 +121,7 @@ struct intel_dsi {
 	u32 dphy_reg;
 	u32 video_frmt_cfg_bits;
 	u16 lp_byte_clk;
+	u8 pps_blc;
 
 	/* timeouts in byte clocks */
 	u16 lp_rx_timeout;
diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index 56b5b80..b91667b 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -297,6 +297,7 @@ static bool generic_init(struct intel_dsi_device *dsi)
 	intel_dsi->pixel_format = mipi_config->videomode_color_format << 7;
 	intel_dsi->dual_link = mipi_config->dual_link;
 	intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
+	intel_dsi->pps_blc = mipi_config->pwm_blc;
 
 	if (intel_dsi->dual_link)
 		intel_dsi->ports = ((1 << PORT_A) | (1 << PORT_C));
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx