On 12/10/2014 7:38 PM, Gaurav K Singh wrote:
For CHT changes are required for calculating the correct m,n & p with
minimal error +/- for the required DSI clock, so that the correct dividor
& ctrl values are written in cck regs for DSI. This patch has been tested
on CHT RVP with 1200 x 1920 panel.
Signed-off-by: Gaurav K Singh <gaurav.k.singh@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dsi_pll.c | 43 ++++++++++++++++++++++++++--------
1 file changed, 33 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c
index 8957f10..9236b66 100644
--- a/drivers/gpu/drm/i915/intel_dsi_pll.c
+++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
@@ -162,7 +162,8 @@ static u32 dsi_clk_from_pclk(u32 pclk, int pixel_format, int lane_count)
#endif
-static int dsi_calc_mnp(u32 dsi_clk, struct dsi_mnp *dsi_mnp)
+static int dsi_calc_mnp(struct drm_i915_private *dev_priv,
+ u32 dsi_clk, struct dsi_mnp *dsi_mnp)
{
u32 m, n, p;
u32 ref_clk;
@@ -173,6 +174,10 @@ static int dsi_calc_mnp(u32 dsi_clk, struct dsi_mnp *dsi_mnp)
u32 calc_m;
u32 calc_p;
u32 m_seed;
+ u32 m_start;
+ u32 m_limit;
+ u32 n_limit;
+ u32 p_limit;
/* dsi_clk is expected in KHZ */
if (dsi_clk < 300000 || dsi_clk > 1150000) {
@@ -180,18 +185,33 @@ static int dsi_calc_mnp(u32 dsi_clk, struct dsi_mnp *dsi_mnp)
return -ECHRNG;
}
- ref_clk = 25000;
+ if (IS_CHERRYVIEW(dev_priv->dev)) {
+ ref_clk = 100000;
+ m_start = 70;
+ m_limit = 96;
+ n_limit = 4;
+ p_limit = 6;
+ } else if (IS_VALLEYVIEW(dev_priv->dev)) {
+ ref_clk = 25000;
+ m_start = 62;
+ m_limit = 92;
+ n_limit = 1;
+ p_limit = 6;
+ } else {
+ DRM_ERROR("Unsupported device\n");
+ return -ENODEV;
+ }
target_dsi_clk = dsi_clk;
error = 0xFFFFFFFF;
tmp_error = 0xFFFFFFFF;
calc_m = 0;
calc_p = 0;
- for (m = 62; m <= 92; m++) {
- for (p = 2; p <= 6; p++) {
+ for (m = m_start; m <= m_limit; m++) {
+ for (p = 2; p <= p_limit; p++) {
/* Find the optimal m and p divisors
with minimal error +/- the required clock */
- calc_dsi_clk = (m * ref_clk) / p;
+ calc_dsi_clk = (m * ref_clk) / (p * n_limit);
if (calc_dsi_clk == target_dsi_clk) {
calc_m = m;
calc_p = p;
@@ -212,11 +232,14 @@ static int dsi_calc_mnp(u32 dsi_clk, struct dsi_mnp *dsi_mnp)
}
m_seed = lfsr_converts[calc_m - 62];
- n = 1;
+ n = n_limit;
dsi_mnp->dsi_pll_ctrl = 1 << (DSI_PLL_P1_POST_DIV_SHIFT + calc_p - 2);
- dsi_mnp->dsi_pll_div = (n - 1) << DSI_PLL_N1_DIV_SHIFT |
- m_seed << DSI_PLL_M1_DIV_SHIFT;
-
+ if (IS_CHERRYVIEW(dev_priv->dev))
+ dsi_mnp->dsi_pll_div = (n/2) << DSI_PLL_N1_DIV_SHIFT |
+ m_seed << DSI_PLL_M1_DIV_SHIFT;
+ else
+ dsi_mnp->dsi_pll_div = (n - 1) << DSI_PLL_N1_DIV_SHIFT |
+ m_seed << DSI_PLL_M1_DIV_SHIFT;
return 0;
}
@@ -235,7 +258,7 @@ static void vlv_configure_dsi_pll(struct intel_encoder *encoder)
dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format,
intel_dsi->lane_count);
- ret = dsi_calc_mnp(dsi_clk, &dsi_mnp);
+ ret = dsi_calc_mnp(dev_priv, dsi_clk, &dsi_mnp);
if (ret) {
DRM_DEBUG_KMS("dsi_calc_mnp failed\n");
return;
Hi Jani,
Could you please review this patch?
With regards,
Gaurav
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
