hactive, hfp, hbp, hsync needs to be halved for dual link MIPI Panels.
Accordingly timing related mmio regs needs to be programmed for both MIPI Ports.
v2: Address review comments by Jani
- Used a for loop instead of do-while loop
v3: Used for_each_dsi_port macro instead of for loop
Signed-off-by: Gaurav K Singh <gaurav.k.singh@xxxxxxxxx>
Signed-off-by: Shobhit Kumar <shobhit.kumar@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dsi.c | 37 ++++++++++++++++++++++++-------------
1 file changed, 24 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 4e18abd..22b1570 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -479,7 +479,7 @@ static void set_dsi_timings(struct drm_encoder *encoder,
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
- enum port port = intel_dsi_pipe_to_port(intel_crtc->pipe);
+ enum port port;
unsigned int bpp = intel_crtc->config.pipe_bpp;
unsigned int lane_count = intel_dsi->lane_count;
@@ -490,6 +490,15 @@ static void set_dsi_timings(struct drm_encoder *encoder,
hsync = mode->hsync_end - mode->hsync_start;
hbp = mode->htotal - mode->hsync_end;
+ if (intel_dsi->dual_link) {
+ hactive /= 2;
+ if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
+ hactive += intel_dsi->pixel_overlap;
+ hfp /= 2;
+ hsync /= 2;
+ hbp /= 2;
+ }
+
vfp = mode->vsync_start - mode->vdisplay;
vsync = mode->vsync_end - mode->vsync_start;
vbp = mode->vtotal - mode->vsync_end;
@@ -502,18 +511,20 @@ static void set_dsi_timings(struct drm_encoder *encoder,
intel_dsi->burst_mode_ratio);
hbp = txbyteclkhs(hbp, bpp, lane_count, intel_dsi->burst_mode_ratio);
- I915_WRITE(MIPI_HACTIVE_AREA_COUNT(port), hactive);
- I915_WRITE(MIPI_HFP_COUNT(port), hfp);
-
- /* meaningful for video mode non-burst sync pulse mode only, can be zero
- * for non-burst sync events and burst modes */
- I915_WRITE(MIPI_HSYNC_PADDING_COUNT(port), hsync);
- I915_WRITE(MIPI_HBP_COUNT(port), hbp);
-
- /* vertical values are in terms of lines */
- I915_WRITE(MIPI_VFP_COUNT(port), vfp);
- I915_WRITE(MIPI_VSYNC_PADDING_COUNT(port), vsync);
- I915_WRITE(MIPI_VBP_COUNT(port), vbp);
+ for_each_dsi_port(port, intel_dsi->ports) {
+ I915_WRITE(MIPI_HACTIVE_AREA_COUNT(port), hactive);
+ I915_WRITE(MIPI_HFP_COUNT(port), hfp);
+
+ /* meaningful for video mode non-burst sync pulse mode only,
+ * can be zero for non-burst sync events and burst modes */
+ I915_WRITE(MIPI_HSYNC_PADDING_COUNT(port), hsync);
+ I915_WRITE(MIPI_HBP_COUNT(port), hbp);
+
+ /* vertical values are in terms of lines */
+ I915_WRITE(MIPI_VFP_COUNT(port), vfp);
+ I915_WRITE(MIPI_VSYNC_PADDING_COUNT(port), vsync);
+ I915_WRITE(MIPI_VBP_COUNT(port), vbp);
+ }
}
static void intel_dsi_prepare(struct intel_encoder *intel_encoder)
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
