On 11/24/2014 09:53 PM, Matt Roper wrote:
Primary and sprite planes have already been refactored to include a
'prepare' step which handles all the commit-time operations that could
fail (i.e., pinning buffers and such). Refactor the cursor commit in a
similar manner.
For simplicity and consistency with other plane types, we also switch to
using intel_pin_and_fence_fb_obj() to perform our pinning for
non-physical cursors. This will allow us to more easily migrate the
code into the atomic 'begin' handler in a plane-agnostic manner in a
future patchset.
Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 114 ++++++++++++++---------------------
1 file changed, 44 insertions(+), 70 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 17788f8..ff94e43 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -11899,19 +11899,51 @@ intel_check_cursor_plane(struct drm_plane *plane,
}
static int
+intel_prepare_cursor_plane(struct drm_plane *plane,
+ struct intel_plane_state *state)
+{
+ struct drm_device *dev = plane->dev;
+ struct drm_framebuffer *fb = state->fb;
+ struct intel_crtc *intel_crtc = to_intel_crtc(state->crtc);
+ struct drm_i915_gem_object *obj = intel_fb_obj(fb);
+ struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
I don't see where plane->fb is being updated. I think this needs to be
done in intel_commit_cursor_plane().
Ander
+ enum pipe pipe = intel_crtc->pipe;
+ int ret = 0;
+
+ if (old_obj != obj) {
+ /* we only need to pin inside GTT if cursor is non-phy */
+ mutex_lock(&dev->struct_mutex);
+ if (!INTEL_INFO(dev)->cursor_needs_physical) {
+ if (obj)
+ ret = intel_pin_and_fence_fb_obj(plane, fb, NULL);
+ if (ret == 0)
+ i915_gem_track_fb(intel_crtc->cursor_bo, obj,
+ INTEL_FRONTBUFFER_CURSOR(pipe));
+ } else {
+ int align = IS_I830(dev) ? 16 * 1024 : 256;
+ if (obj)
+ ret = i915_gem_object_attach_phys(obj, align);
+ if (ret)
+ DRM_DEBUG_KMS("failed to attach phys object\n");
+ }
+ mutex_unlock(&dev->struct_mutex);
+ }
+
+ return ret;
+}
+
+static void
intel_commit_cursor_plane(struct drm_plane *plane,
struct intel_plane_state *state)
{
struct drm_crtc *crtc = state->crtc;
struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_plane *intel_plane = to_intel_plane(plane);
struct drm_i915_gem_object *obj = intel_fb_obj(state->fb);
enum pipe pipe = intel_crtc->pipe;
unsigned old_width;
uint32_t addr;
- int ret;
crtc->cursor_x = state->orig_dst.x1;
crtc->cursor_y = state->orig_dst.y1;
@@ -11929,75 +11961,18 @@ intel_commit_cursor_plane(struct drm_plane *plane,
if (intel_crtc->cursor_bo == obj)
goto update;
- /* if we want to turn off the cursor ignore width and height */
- if (!obj) {
- DRM_DEBUG_KMS("cursor off\n");
+ if (!obj)
addr = 0;
- mutex_lock(&dev->struct_mutex);
- goto finish;
- }
-
- /* we only need to pin inside GTT if cursor is non-phy */
- mutex_lock(&dev->struct_mutex);
- if (!INTEL_INFO(dev)->cursor_needs_physical) {
- unsigned alignment;
-
- /*
- * Global gtt pte registers are special registers which actually
- * forward writes to a chunk of system memory. Which means that
- * there is no risk that the register values disappear as soon
- * as we call intel_runtime_pm_put(), so it is correct to wrap
- * only the pin/unpin/fence and not more.
- */
- intel_runtime_pm_get(dev_priv);
-
- /* Note that the w/a also requires 2 PTE of padding following
- * the bo. We currently fill all unused PTE with the shadow
- * page and so we should always have valid PTE following the
- * cursor preventing the VT-d warning.
- */
- alignment = 0;
- if (need_vtd_wa(dev))
- alignment = 64*1024;
-
- ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
- if (ret) {
- DRM_DEBUG_KMS("failed to move cursor bo into the GTT\n");
- intel_runtime_pm_put(dev_priv);
- goto fail_locked;
- }
-
- ret = i915_gem_object_put_fence(obj);
- if (ret) {
- DRM_DEBUG_KMS("failed to release fence for cursor");
- intel_runtime_pm_put(dev_priv);
- goto fail_unpin;
- }
-
+ else if (!INTEL_INFO(dev)->cursor_needs_physical)
addr = i915_gem_obj_ggtt_offset(obj);
-
- intel_runtime_pm_put(dev_priv);
-
- } else {
- int align = IS_I830(dev) ? 16 * 1024 : 256;
- ret = i915_gem_object_attach_phys(obj, align);
- if (ret) {
- DRM_DEBUG_KMS("failed to attach phys object\n");
- goto fail_locked;
- }
+ else
addr = obj->phys_handle->busaddr;
- }
-finish:
if (intel_crtc->cursor_bo) {
if (!INTEL_INFO(dev)->cursor_needs_physical)
i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
}
- i915_gem_track_fb(intel_crtc->cursor_bo, obj,
- INTEL_FRONTBUFFER_CURSOR(pipe));
- mutex_unlock(&dev->struct_mutex);
-
intel_crtc->cursor_addr = addr;
intel_crtc->cursor_bo = obj;
update:
@@ -12013,13 +11988,6 @@ update:
intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_CURSOR(pipe));
}
-
- return 0;
-fail_unpin:
- i915_gem_object_unpin_from_display_plane(obj);
-fail_locked:
- mutex_unlock(&dev->struct_mutex);
- return ret;
}
static int
@@ -12060,7 +12028,13 @@ intel_cursor_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
if (ret)
return ret;
- return intel_commit_cursor_plane(plane, &state);
+ ret = intel_prepare_cursor_plane(plane, &state);
+ if (ret)
+ return ret;
+
+ intel_commit_cursor_plane(plane, &state);
+
+ return 0;
}
static const struct drm_plane_funcs intel_cursor_plane_funcs = {
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
