[PATCH 4/9] drm/i915: Pixel Clock changes for DSI dual link

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For dual link MIPI Panels, each port needs half of pixel clock. Pixel overlap
can be enabled if needed by panel, then in that case, pixel clock will be
increased for extra pixels.

v2 : Address review comments by Jani
     - Removed the bit mask used for ->dual_link
     - Used DSI instead of MIPI for #define variables

Signed-off-by: Gaurav K Singh <gaurav.k.singh@xxxxxxxxx>
Signed-off-by: Shobhit Kumar <shobhit.kumar@xxxxxxxxx>
---
 drivers/gpu/drm/i915/i915_reg.h            |    4 ++++
 drivers/gpu/drm/i915/intel_bios.h          |    3 ++-
 drivers/gpu/drm/i915/intel_dsi.c           |    8 ++++++++
 drivers/gpu/drm/i915/intel_dsi.h           |    6 ++++++
 drivers/gpu/drm/i915/intel_dsi_panel_vbt.c |   21 +++++++++++++++++++++
 5 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c981f5d..87149ba 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6029,6 +6029,10 @@ enum punit_power_well {
 #define GEN8_PMINTR_REDIRECT_TO_NON_DISP	(1<<31)
 #define VLV_PWRDWNUPCTL				0xA294
 
+#define VLV_CHICKEN_3				0x7040C
+#define  PIXEL_OVERLAP_CNT_MASK			(3 << 30)
+#define  PIXEL_OVERLAP_CNT_SHIFT		30
+
 #define GEN6_PMISR				0x44020
 #define GEN6_PMIMR				0x44024 /* rps_lock */
 #define GEN6_PMIIR				0x44028
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index de01167..a6a8710 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -818,7 +818,8 @@ struct mipi_config {
 #define DUAL_LINK_PIXEL_ALT	2
 	u16 dual_link:2;
 	u16 lane_cnt:2;
-	u16 rsvd3:12;
+	u16 pixel_overlap:3;
+	u16 rsvd3:9;
 
 	u16 rsvd4;
 
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 1163a5b..e900f01 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -111,6 +111,14 @@ static void intel_dsi_port_enable(struct intel_encoder *encoder)
 	enum port port;
 	u32 temp;
 
+	if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
+		temp = I915_READ(VLV_CHICKEN_3);
+		temp &= ~PIXEL_OVERLAP_CNT_MASK |
+					intel_dsi->pixel_overlap <<
+					PIXEL_OVERLAP_CNT_SHIFT;
+		I915_WRITE(VLV_CHICKEN_3, temp);
+	}
+
 	for_each_dsi_port(port, intel_dsi->ports) {
 		temp = I915_READ(MIPI_PORT_CTRL(port));
 
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index f2cc2fc..8fe2064 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -28,6 +28,11 @@
 #include <drm/drm_crtc.h>
 #include "intel_drv.h"
 
+/* Dual Link support */
+#define DSI_DUAL_LINK_NONE		0
+#define DSI_DUAL_LINK_FRONT_BACK	1
+#define DSI_DUAL_LINK_PIXEL_ALT		2
+
 struct intel_dsi_device {
 	unsigned int panel_id;
 	const char *name;
@@ -105,6 +110,7 @@ struct intel_dsi {
 
 	u8 escape_clk_div;
 	u8 dual_link;
+	u8 pixel_overlap;
 	u32 port_bits;
 	u32 bw_timer;
 	u32 dphy_reg;
diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index 7f1ba58..f1417b9 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -288,6 +288,7 @@ static bool generic_init(struct intel_dsi_device *dsi)
 	intel_dsi->lane_count = mipi_config->lane_cnt + 1;
 	intel_dsi->pixel_format = mipi_config->videomode_color_format << 7;
 	intel_dsi->dual_link = mipi_config->dual_link;
+	intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
 
 	if (intel_dsi->dual_link) {
 		intel_dsi->ports = ((1 << PORT_A) | (1 << PORT_C));
@@ -313,6 +314,20 @@ static bool generic_init(struct intel_dsi_device *dsi)
 
 	pclk = mode->clock;
 
+	/* In dual link mode each port needs half of pixel clock */
+	if (intel_dsi->dual_link) {
+		pclk = pclk / 2;
+
+		/* we can enable pixel_overlap if needed by panel. In this
+		 * case we need to increase the pixelclock for extra pixels
+		 */
+		if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
+			pclk += DIV_ROUND_UP(mode->vtotal *
+						intel_dsi->pixel_overlap *
+						60, 1000);
+		}
+	}
+
 	/* Burst Mode Ratio
 	 * Target ddr frequency from VBT / non burst ddr freq
 	 * multiply by 100 to preserve remainder
@@ -507,6 +522,12 @@ static bool generic_init(struct intel_dsi_device *dsi)
 	DRM_DEBUG_KMS("Clockstop %s\n", intel_dsi->clock_stop ?
 						"disabled" : "enabled");
 	DRM_DEBUG_KMS("Mode %s\n", intel_dsi->operation_mode ? "command" : "video");
+	if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
+		DRM_DEBUG_KMS("Dual link: DSI_DUAL_LINK_FRONT_BACK\n");
+	else if (intel_dsi->dual_link == DSI_DUAL_LINK_PIXEL_ALT)
+		DRM_DEBUG_KMS("Dual link: DSI_DUAL_LINK_PIXEL_ALT\n");
+	else
+		DRM_DEBUG_KMS("Dual link: NONE\n");
 	DRM_DEBUG_KMS("Pixel Format %d\n", intel_dsi->pixel_format);
 	DRM_DEBUG_KMS("TLPX %d\n", intel_dsi->escape_clk_div);
 	DRM_DEBUG_KMS("LP RX Timeout 0x%x\n", intel_dsi->lp_rx_timeout);
-- 
1.7.9.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux