Now that we have hooks to enable the atomic plane helpers, we can use the plane helpers for our .update_plane() and .disable_plane() entrypoints. Even though we'd already refactored our plane handling code into check/commit, we still have to rework some of that logic here as we make the transition. The atomic plane helpers now call prepare_fb/cleanup_fb for us, so note the following: - 'commit' should no longer unpin the old object; the cleanup_fb will take care of this for us - prepare_fb only gets called when we actually have an fb, so the internal 'disable' code needs to update frontbuffer tracking - the cursor plane code never had 'prepare' code separated from its 'commit' function, so a lot of the cursor's 'commit' needs to be dropped since prepare_fb already does it for us - with all the pinning work removed from cursor commit, it can no longer fail and should return void rather than int v2: Fix commit message typo (Bob) Testcase: igt/kms_plane Testcase: igt/kms_universal_plane Testcase: igt/kms_cursor_crc Acknowledged-by: Bob Paauwe <bob.j.paauwe@xxxxxxxxx> Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx> --- drivers/gpu/drm/i915/intel_display.c | 255 +++++------------------------------ drivers/gpu/drm/i915/intel_sprite.c | 122 ++--------------- 2 files changed, 41 insertions(+), 336 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 32a2b12..8d5a3b4 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8285,17 +8285,15 @@ static bool cursor_size_ok(struct drm_device *dev, return true; } -static int intel_crtc_cursor_set_obj(struct drm_crtc *crtc, - struct drm_i915_gem_object *obj, - uint32_t width, uint32_t height) +static void intel_crtc_cursor_set_obj(struct drm_crtc *crtc, + struct drm_i915_gem_object *obj, + uint32_t width, uint32_t height) { struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); enum pipe pipe = intel_crtc->pipe; unsigned old_width; uint32_t addr; - int ret; /* if we want to turn off the cursor ignore width and height */ if (!obj) { @@ -8305,64 +8303,14 @@ static int intel_crtc_cursor_set_obj(struct drm_crtc *crtc, goto finish; } - /* we only need to pin inside GTT if cursor is non-phy */ + /* plane helper's prepare_fb() already handled pinning */ mutex_lock(&dev->struct_mutex); - if (!INTEL_INFO(dev)->cursor_needs_physical) { - unsigned alignment; - - /* - * Global gtt pte registers are special registers which actually - * forward writes to a chunk of system memory. Which means that - * there is no risk that the register values disappear as soon - * as we call intel_runtime_pm_put(), so it is correct to wrap - * only the pin/unpin/fence and not more. - */ - intel_runtime_pm_get(dev_priv); - - /* Note that the w/a also requires 2 PTE of padding following - * the bo. We currently fill all unused PTE with the shadow - * page and so we should always have valid PTE following the - * cursor preventing the VT-d warning. - */ - alignment = 0; - if (need_vtd_wa(dev)) - alignment = 64*1024; - - ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL); - if (ret) { - DRM_DEBUG_KMS("failed to move cursor bo into the GTT\n"); - intel_runtime_pm_put(dev_priv); - goto fail_locked; - } - - ret = i915_gem_object_put_fence(obj); - if (ret) { - DRM_DEBUG_KMS("failed to release fence for cursor"); - intel_runtime_pm_put(dev_priv); - goto fail_unpin; - } - + if (!INTEL_INFO(dev)->cursor_needs_physical) addr = i915_gem_obj_ggtt_offset(obj); - - intel_runtime_pm_put(dev_priv); - } else { - int align = IS_I830(dev) ? 16 * 1024 : 256; - ret = i915_gem_object_attach_phys(obj, align); - if (ret) { - DRM_DEBUG_KMS("failed to attach phys object\n"); - goto fail_locked; - } + else addr = obj->phys_handle->busaddr; - } finish: - if (intel_crtc->cursor_bo) { - if (!INTEL_INFO(dev)->cursor_needs_physical) - i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo); - } - - i915_gem_track_fb(intel_crtc->cursor_bo, obj, - INTEL_FRONTBUFFER_CURSOR(pipe)); mutex_unlock(&dev->struct_mutex); old_width = intel_crtc->cursor_width; @@ -8379,13 +8327,6 @@ static int intel_crtc_cursor_set_obj(struct drm_crtc *crtc, intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_CURSOR(pipe)); } - - return 0; -fail_unpin: - i915_gem_object_unpin_from_display_plane(obj); -fail_locked: - mutex_unlock(&dev->struct_mutex); - return ret; } static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, @@ -11544,7 +11485,6 @@ disable_unpin: mutex_lock(&dev->struct_mutex); i915_gem_track_fb(intel_fb_obj(plane->fb), NULL, INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe)); - intel_unpin_fb_obj(intel_fb_obj(plane->fb)); mutex_unlock(&dev->struct_mutex); plane->fb = NULL; @@ -11568,42 +11508,6 @@ intel_check_primary_plane(struct drm_plane *plane, false, true, &state->visible); } -static int -intel_prepare_primary_plane(struct drm_plane *plane, - struct intel_plane_state *state) -{ - struct drm_crtc *crtc = state->base.crtc; - struct drm_framebuffer *fb = state->base.fb; - struct drm_device *dev = crtc->dev; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - enum pipe pipe = intel_crtc->pipe; - struct drm_i915_gem_object *obj = intel_fb_obj(fb); - struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb); - int ret; - - intel_crtc_wait_for_pending_flips(crtc); - - if (intel_crtc_has_pending_flip(crtc)) { - DRM_ERROR("pipe is still busy with an old pageflip\n"); - return -EBUSY; - } - - if (old_obj != obj) { - mutex_lock(&dev->struct_mutex); - ret = intel_pin_and_fence_fb_obj(plane, fb, NULL); - if (ret == 0) - i915_gem_track_fb(old_obj, obj, - INTEL_FRONTBUFFER_PRIMARY(pipe)); - mutex_unlock(&dev->struct_mutex); - if (ret != 0) { - DRM_DEBUG_KMS("pin & fence failed\n"); - return ret; - } - } - - return 0; -} - static void intel_commit_primary_plane(struct drm_plane *plane, struct intel_plane_state *state) @@ -11614,9 +11518,7 @@ intel_commit_primary_plane(struct drm_plane *plane, struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); enum pipe pipe = intel_crtc->pipe; - struct drm_framebuffer *old_fb = plane->fb; struct drm_i915_gem_object *obj = intel_fb_obj(fb); - struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb); struct intel_plane *intel_plane = to_intel_plane(plane); struct drm_rect *src = &state->src; @@ -11687,62 +11589,6 @@ intel_commit_primary_plane(struct drm_plane *plane, intel_update_fbc(dev); mutex_unlock(&dev->struct_mutex); } - - if (old_fb && old_fb != fb) { - if (intel_crtc->active) - intel_wait_for_vblank(dev, intel_crtc->pipe); - - mutex_lock(&dev->struct_mutex); - intel_unpin_fb_obj(old_obj); - mutex_unlock(&dev->struct_mutex); - } -} - -static int -intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc, - struct drm_framebuffer *fb, int crtc_x, int crtc_y, - unsigned int crtc_w, unsigned int crtc_h, - uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h) -{ - struct intel_plane_state state; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int ret; - - state.base.crtc = crtc; - state.base.fb = fb; - - /* sample coordinates in 16.16 fixed point */ - state.src.x1 = src_x; - state.src.x2 = src_x + src_w; - state.src.y1 = src_y; - state.src.y2 = src_y + src_h; - - /* integer pixels */ - state.dst.x1 = crtc_x; - state.dst.x2 = crtc_x + crtc_w; - state.dst.y1 = crtc_y; - state.dst.y2 = crtc_y + crtc_h; - - state.clip.x1 = 0; - state.clip.y1 = 0; - state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0; - state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0; - - state.orig_src = state.src; - state.orig_dst = state.dst; - - ret = intel_check_primary_plane(plane, &state); - if (ret) - return ret; - - ret = intel_prepare_primary_plane(plane, &state); - if (ret) - return ret; - - intel_commit_primary_plane(plane, &state); - - return 0; } /* Common destruction function for both primary and cursor planes */ @@ -11755,8 +11601,8 @@ void intel_plane_destroy(struct drm_plane *plane) } static const struct drm_plane_funcs intel_primary_plane_funcs = { - .update_plane = intel_primary_plane_setplane, - .disable_plane = intel_primary_plane_disable, + .update_plane = drm_plane_helper_update, + .disable_plane = drm_plane_helper_disable, .destroy = intel_plane_destroy, .set_property = intel_plane_set_property, .atomic_duplicate_state = intel_plane_duplicate_state, @@ -11816,15 +11662,22 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev, return &primary->base; } -static int +static void intel_cursor_plane_disable(struct drm_plane *plane) { + struct intel_plane *intel_plane = to_intel_plane(plane); + if (!plane->fb) - return 0; + return; BUG_ON(!plane->crtc); - return intel_crtc_cursor_set_obj(plane->crtc, NULL, 0, 0); + intel_crtc_cursor_set_obj(plane->crtc, NULL, 0, 0); + + mutex_lock(&plane->dev->struct_mutex); + i915_gem_track_fb(intel_fb_obj(plane->fb), NULL, + INTEL_FRONTBUFFER_CURSOR(intel_plane->pipe)); + mutex_unlock(&plane->dev->struct_mutex); } static int @@ -11838,7 +11691,6 @@ intel_check_cursor_plane(struct drm_plane *plane, struct drm_rect *src = &state->src; const struct drm_rect *clip = &state->clip; struct drm_i915_gem_object *obj = intel_fb_obj(fb); - int crtc_w, crtc_h; unsigned stride; int ret; @@ -11856,15 +11708,14 @@ intel_check_cursor_plane(struct drm_plane *plane, return 0; /* Check for which cursor types we support */ - crtc_w = drm_rect_width(&state->orig_dst); - crtc_h = drm_rect_height(&state->orig_dst); - if (!cursor_size_ok(dev, crtc_w, crtc_h)) { - DRM_DEBUG("Cursor dimension not supported\n"); + if (!cursor_size_ok(dev, state->base.crtc_w, state->base.crtc_h)) { + DRM_DEBUG("Cursor dimension %dx%d not supported\n", + state->base.crtc_w, state->base.crtc_h); return -EINVAL; } - stride = roundup_pow_of_two(crtc_w) * 4; - if (obj->base.size < stride * crtc_h) { + stride = roundup_pow_of_two(state->base.crtc_w) * 4; + if (obj->base.size < stride * state->base.crtc_h) { DRM_DEBUG_KMS("buffer is too small\n"); return -ENOMEM; } @@ -11883,7 +11734,7 @@ intel_check_cursor_plane(struct drm_plane *plane, return ret; } -static int +static void intel_commit_cursor_plane(struct drm_plane *plane, struct intel_plane_state *state) { @@ -11893,10 +11744,9 @@ intel_commit_cursor_plane(struct drm_plane *plane, struct intel_plane *intel_plane = to_intel_plane(plane); struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj = intel_fb->obj; - int crtc_w, crtc_h; - crtc->cursor_x = state->orig_dst.x1; - crtc->cursor_y = state->orig_dst.y1; + crtc->cursor_x = state->base.crtc_x; + crtc->cursor_y = state->base.crtc_y; intel_plane->crtc_x = state->orig_dst.x1; intel_plane->crtc_y = state->orig_dst.y1; @@ -11909,63 +11759,20 @@ intel_commit_cursor_plane(struct drm_plane *plane, intel_plane->obj = obj; if (fb != crtc->cursor->fb) { - crtc_w = drm_rect_width(&state->orig_dst); - crtc_h = drm_rect_height(&state->orig_dst); - return intel_crtc_cursor_set_obj(crtc, obj, crtc_w, crtc_h); + intel_crtc_cursor_set_obj(crtc, obj, + state->base.crtc_w, + state->base.crtc_h); } else { intel_crtc_update_cursor(crtc, state->visible); intel_frontbuffer_flip(crtc->dev, INTEL_FRONTBUFFER_CURSOR(intel_crtc->pipe)); - - return 0; } } -static int -intel_cursor_plane_update(struct drm_plane *plane, struct drm_crtc *crtc, - struct drm_framebuffer *fb, int crtc_x, int crtc_y, - unsigned int crtc_w, unsigned int crtc_h, - uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h) -{ - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct intel_plane_state state; - int ret; - - state.base.crtc = crtc; - state.base.fb = fb; - - /* sample coordinates in 16.16 fixed point */ - state.src.x1 = src_x; - state.src.x2 = src_x + src_w; - state.src.y1 = src_y; - state.src.y2 = src_y + src_h; - - /* integer pixels */ - state.dst.x1 = crtc_x; - state.dst.x2 = crtc_x + crtc_w; - state.dst.y1 = crtc_y; - state.dst.y2 = crtc_y + crtc_h; - - state.clip.x1 = 0; - state.clip.y1 = 0; - state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0; - state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0; - - state.orig_src = state.src; - state.orig_dst = state.dst; - - ret = intel_check_cursor_plane(plane, &state); - if (ret) - return ret; - - return intel_commit_cursor_plane(plane, &state); -} - static const struct drm_plane_funcs intel_cursor_plane_funcs = { - .update_plane = intel_cursor_plane_update, - .disable_plane = intel_cursor_plane_disable, + .update_plane = drm_plane_helper_update, + .disable_plane = drm_plane_helper_disable, .destroy = intel_plane_destroy, .set_property = intel_plane_set_property, .atomic_duplicate_state = intel_plane_duplicate_state, diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index d3677c3..28ccaf7 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -1106,7 +1106,6 @@ intel_check_sprite_plane(struct drm_plane *plane, uint32_t src_x, src_y, src_w, src_h; struct drm_rect *src = &state->src; struct drm_rect *dst = &state->dst; - struct drm_rect *orig_src = &state->orig_src; const struct drm_rect *clip = &state->clip; int hscale, vscale; int max_scale, min_scale; @@ -1187,10 +1186,10 @@ intel_check_sprite_plane(struct drm_plane *plane, intel_plane->rotation); /* sanity check to make sure the src viewport wasn't enlarged */ - WARN_ON(src->x1 < (int) orig_src->x1 || - src->y1 < (int) orig_src->y1 || - src->x2 > (int) orig_src->x2 || - src->y2 > (int) orig_src->y2); + WARN_ON(src->x1 < (int) state->base.src_x || + src->y1 < (int) state->base.src_y || + src->x2 > (int) state->base.src_x + state->base.src_w || + src->y2 > (int) state->base.src_y + state->base.src_h); /* * Hardware doesn't handle subpixel coordinates. @@ -1258,41 +1257,6 @@ intel_check_sprite_plane(struct drm_plane *plane, return 0; } -static int -intel_prepare_sprite_plane(struct drm_plane *plane, - struct intel_plane_state *state) -{ - struct drm_device *dev = plane->dev; - struct drm_crtc *crtc = state->base.crtc; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct intel_plane *intel_plane = to_intel_plane(plane); - enum pipe pipe = intel_crtc->pipe; - struct drm_framebuffer *fb = state->base.fb; - struct drm_i915_gem_object *obj = intel_fb_obj(fb); - struct drm_i915_gem_object *old_obj = intel_plane->obj; - int ret; - - if (old_obj != obj) { - mutex_lock(&dev->struct_mutex); - - /* Note that this will apply the VT-d workaround for scanouts, - * which is more restrictive than required for sprites. (The - * primary plane requires 256KiB alignment with 64 PTE padding, - * the sprite planes only require 128KiB alignment and 32 PTE - * padding. - */ - ret = intel_pin_and_fence_fb_obj(plane, fb, NULL); - if (ret == 0) - i915_gem_track_fb(old_obj, obj, - INTEL_FRONTBUFFER_SPRITE(pipe)); - mutex_unlock(&dev->struct_mutex); - if (ret) - return ret; - } - - return 0; -} - static void intel_commit_sprite_plane(struct drm_plane *plane, struct intel_plane_state *state) @@ -1304,7 +1268,6 @@ intel_commit_sprite_plane(struct drm_plane *plane, enum pipe pipe = intel_crtc->pipe; struct drm_framebuffer *fb = state->base.fb; struct drm_i915_gem_object *obj = intel_fb_obj(fb); - struct drm_i915_gem_object *old_obj = intel_plane->obj; int crtc_x, crtc_y; unsigned int crtc_w, crtc_h; uint32_t src_x, src_y, src_w, src_h; @@ -1362,68 +1325,6 @@ intel_commit_sprite_plane(struct drm_plane *plane, if (!primary_was_enabled && primary_enabled) intel_post_enable_primary(crtc); } - - /* Unpin old obj after new one is active to avoid ugliness */ - if (old_obj && old_obj != obj) { - - /* - * It's fairly common to simply update the position of - * an existing object. In that case, we don't need to - * wait for vblank to avoid ugliness, we only need to - * do the pin & ref bookkeeping. - */ - if (intel_crtc->active) - intel_wait_for_vblank(dev, intel_crtc->pipe); - - mutex_lock(&dev->struct_mutex); - intel_unpin_fb_obj(old_obj); - mutex_unlock(&dev->struct_mutex); - } -} - -static int -intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, - struct drm_framebuffer *fb, int crtc_x, int crtc_y, - unsigned int crtc_w, unsigned int crtc_h, - uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h) -{ - struct intel_plane_state state; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int ret; - - state.base.crtc = crtc; - state.base.fb = fb; - - /* sample coordinates in 16.16 fixed point */ - state.src.x1 = src_x; - state.src.x2 = src_x + src_w; - state.src.y1 = src_y; - state.src.y2 = src_y + src_h; - - /* integer pixels */ - state.dst.x1 = crtc_x; - state.dst.x2 = crtc_x + crtc_w; - state.dst.y1 = crtc_y; - state.dst.y2 = crtc_y + crtc_h; - - state.clip.x1 = 0; - state.clip.y1 = 0; - state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0; - state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0; - state.orig_src = state.src; - state.orig_dst = state.dst; - - ret = intel_check_sprite_plane(plane, &state); - if (ret) - return ret; - - ret = intel_prepare_sprite_plane(plane, &state); - if (ret) - return ret; - - intel_commit_sprite_plane(plane, &state); - return 0; } int @@ -1459,7 +1360,6 @@ intel_sprite_plane_disable(struct drm_plane *plane) intel_wait_for_vblank(dev, intel_plane->pipe); mutex_lock(&dev->struct_mutex); - intel_unpin_fb_obj(intel_plane->obj); i915_gem_track_fb(intel_plane->obj, NULL, INTEL_FRONTBUFFER_SPRITE(pipe)); mutex_unlock(&dev->struct_mutex); @@ -1557,21 +1457,19 @@ int intel_plane_set_property(struct drm_plane *plane, int intel_plane_restore(struct drm_plane *plane) { - struct intel_plane *intel_plane = to_intel_plane(plane); - if (!plane->crtc || !plane->fb) return 0; return plane->funcs->update_plane(plane, plane->crtc, plane->fb, - intel_plane->crtc_x, intel_plane->crtc_y, - intel_plane->crtc_w, intel_plane->crtc_h, - intel_plane->src_x, intel_plane->src_y, - intel_plane->src_w, intel_plane->src_h); + plane->state->crtc_x, plane->state->crtc_y, + plane->state->crtc_w, plane->state->crtc_h, + plane->state->src_x, plane->state->src_y, + plane->state->src_w, plane->state->src_h); } static const struct drm_plane_funcs intel_plane_funcs = { - .update_plane = intel_update_plane, - .disable_plane = intel_sprite_plane_disable, + .update_plane = drm_plane_helper_update, + .disable_plane = drm_plane_helper_disable, .destroy = intel_plane_destroy, .set_property = intel_plane_set_property, .atomic_duplicate_state = intel_plane_duplicate_state, -- 1.8.5.1 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx