Re: [PATCH 1/6] drm/i915: factor out compute_config from __intel_set_mode v3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@xxxxxxxxx>

On 11/06/2014 12:26 AM, Jesse Barnes wrote:
> This allows us to calculate the full pipe config before we do any mode
> setting work.
> 
> v2:
>    - clarify comments about global vs. per-crtc mode set (Ander)
>    - clean up unnecessary pipe_config = NULL setting (Ander)
> v3:
>    - fix pipe_config handling (alloc in compute_config, free in set_mode) (Jesse)
>    - fix arg order in set_mode (Jesse)
>    - fix failure path of set_config (Ander)
> 
> Signed-off-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
> ---
>   drivers/gpu/drm/i915/intel_display.c | 105 ++++++++++++++++++++++++-----------
>   1 file changed, 74 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index a9df85f..a3ebab8 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -10656,45 +10656,60 @@ static void update_scanline_offset(struct intel_crtc *crtc)
>   		crtc->scanline_offset = 1;
>   }
>   
> +static struct intel_crtc_config *
> +intel_modeset_compute_config(struct drm_crtc *crtc,
> +			     struct drm_display_mode *mode,
> +			     struct drm_framebuffer *fb,
> +			     unsigned *modeset_pipes,
> +			     unsigned *prepare_pipes,
> +			     unsigned *disable_pipes)
> +{
> +	struct intel_crtc_config *pipe_config = NULL;
> +
> +	intel_modeset_affected_pipes(crtc, modeset_pipes,
> +				     prepare_pipes, disable_pipes);
> +
> +	if ((*modeset_pipes) == 0)
> +		goto out;
> +
> +	/*
> +	 * Note this needs changes when we start tracking multiple modes
> +	 * and crtcs.  At that point we'll need to compute the whole config
> +	 * (i.e. one pipe_config for each crtc) rather than just the one
> +	 * for this crtc.
> +	 */
> +	pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
> +	if (IS_ERR(pipe_config)) {
> +		goto out;
> +	}
> +	intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
> +			       "[modeset]");
> +	to_intel_crtc(crtc)->new_config = pipe_config;
> +
> +out:
> +	return pipe_config;
> +}
> +
>   static int __intel_set_mode(struct drm_crtc *crtc,
>   			    struct drm_display_mode *mode,
> -			    int x, int y, struct drm_framebuffer *fb)
> +			    int x, int y, struct drm_framebuffer *fb,
> +			    struct intel_crtc_config *pipe_config,
> +			    unsigned modeset_pipes,
> +			    unsigned prepare_pipes,
> +			    unsigned disable_pipes)
>   {
>   	struct drm_device *dev = crtc->dev;
>   	struct drm_i915_private *dev_priv = dev->dev_private;
>   	struct drm_display_mode *saved_mode;
> -	struct intel_crtc_config *pipe_config = NULL;
>   	struct intel_crtc *intel_crtc;
> -	unsigned disable_pipes, prepare_pipes, modeset_pipes;
>   	int ret = 0;
>   
>   	saved_mode = kmalloc(sizeof(*saved_mode), GFP_KERNEL);
>   	if (!saved_mode)
>   		return -ENOMEM;
>   
> -	intel_modeset_affected_pipes(crtc, &modeset_pipes,
> -				     &prepare_pipes, &disable_pipes);
> -
>   	*saved_mode = crtc->mode;
>   
> -	/* Hack: Because we don't (yet) support global modeset on multiple
> -	 * crtcs, we don't keep track of the new mode for more than one crtc.
> -	 * Hence simply check whether any bit is set in modeset_pipes in all the
> -	 * pieces of code that are not yet converted to deal with mutliple crtcs
> -	 * changing their mode at the same time. */
> -	if (modeset_pipes) {
> -		pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
> -		if (IS_ERR(pipe_config)) {
> -			ret = PTR_ERR(pipe_config);
> -			pipe_config = NULL;
> -
> -			goto out;
> -		}
> -		intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
> -				       "[modeset]");
> -		to_intel_crtc(crtc)->new_config = pipe_config;
> -	}
> -
>   	/*
>   	 * See if the config requires any additional preparation, e.g.
>   	 * to adjust global state with pipes off.  We need to do this
> @@ -10719,6 +10734,10 @@ static int __intel_set_mode(struct drm_crtc *crtc,
>   
>   	/* crtc->mode is already used by the ->mode_set callbacks, hence we need
>   	 * to set it here already despite that we pass it down the callchain.
> +	 *
> +	 * Note we'll need to fix this up when we start tracking multiple
> +	 * pipes; here we assume a single modeset_pipe and only track the
> +	 * single crtc and mode.
>   	 */
>   	if (modeset_pipes) {
>   		crtc->mode = *mode;
> @@ -10787,19 +10806,23 @@ done:
>   	if (ret && crtc->enabled)
>   		crtc->mode = *saved_mode;
>   
> -out:
>   	kfree(pipe_config);
>   	kfree(saved_mode);
>   	return ret;
>   }
>   
> -static int intel_set_mode(struct drm_crtc *crtc,
> -			  struct drm_display_mode *mode,
> -			  int x, int y, struct drm_framebuffer *fb)
> +static int intel_set_mode_pipes(struct drm_crtc *crtc,
> +				struct drm_display_mode *mode,
> +				int x, int y, struct drm_framebuffer *fb,
> +				struct intel_crtc_config *pipe_config,
> +				unsigned modeset_pipes,
> +				unsigned prepare_pipes,
> +				unsigned disable_pipes)
>   {
>   	int ret;
>   
> -	ret = __intel_set_mode(crtc, mode, x, y, fb);
> +	ret = __intel_set_mode(crtc, mode, x, y, fb, pipe_config, modeset_pipes,
> +			       prepare_pipes, disable_pipes);
>   
>   	if (ret == 0)
>   		intel_modeset_check_state(crtc->dev);
> @@ -10807,6 +10830,26 @@ static int intel_set_mode(struct drm_crtc *crtc,
>   	return ret;
>   }
>   
> +static int intel_set_mode(struct drm_crtc *crtc,
> +			  struct drm_display_mode *mode,
> +			  int x, int y, struct drm_framebuffer *fb)
> +{
> +	struct intel_crtc_config *pipe_config;
> +	unsigned modeset_pipes, prepare_pipes, disable_pipes;
> +
> +	pipe_config = intel_modeset_compute_config(crtc, mode, fb,
> +						   &modeset_pipes,
> +						   &prepare_pipes,
> +						   &disable_pipes);
> +
> +	if (IS_ERR(pipe_config))
> +		return PTR_ERR(pipe_config);
> +
> +	return intel_set_mode_pipes(crtc, mode, x, y, fb, pipe_config,
> +				    modeset_pipes, prepare_pipes,
> +				    disable_pipes);
> +}
> +
>   void intel_crtc_restore_mode(struct drm_crtc *crtc)
>   {
>   	intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->primary->fb);
> @@ -13156,8 +13199,8 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
>   			struct drm_crtc *crtc =
>   				dev_priv->pipe_to_crtc_mapping[pipe];
>   
> -			__intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y,
> -					 crtc->primary->fb);
> +			intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y,
> +				       crtc->primary->fb);
>   		}
>   	} else {
>   		intel_modeset_update_staged_output_state(dev);
> 

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux