From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Always print the final PCBR register value on both vlv and chv, and
also tell us whether the BIOS was a good citizen or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_pm.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index e8a6f92..ef8e055 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -5126,12 +5126,15 @@ static void cherryview_setup_pctx(struct drm_device *dev)
pcbr = I915_READ(VLV_PCBR);
if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) {
+ DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n");
paddr = (dev_priv->mm.stolen_base +
(gtt->stolen_size - pctx_size));
pctx_paddr = (paddr & (~4095));
I915_WRITE(VLV_PCBR, pctx_paddr);
}
+
+ DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR));
}
static void valleyview_setup_pctx(struct drm_device *dev)
@@ -5157,6 +5160,8 @@ static void valleyview_setup_pctx(struct drm_device *dev)
goto out;
}
+ DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n");
+
/*
* From the Gunit register HAS:
* The Gfx driver is expected to program this register and ensure
@@ -5175,6 +5180,7 @@ static void valleyview_setup_pctx(struct drm_device *dev)
I915_WRITE(VLV_PCBR, pctx_paddr);
out:
+ DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR));
dev_priv->vlv_pctx = pctx;
}
@@ -5366,8 +5372,6 @@ static void cherryview_enable_rps(struct drm_device *dev)
/* For now we assume BIOS is allocating and populating the PCBR */
pcbr = I915_READ(VLV_PCBR);
- DRM_DEBUG_DRIVER("PCBR offset : 0x%x\n", pcbr);
-
/* 3: Enable RC6 */
if ((intel_enable_rc6(dev) & INTEL_RC6_ENABLE) &&
(pcbr >> VLV_PCBR_ADDR_SHIFT))
--
2.0.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
