[PATCH 2/4] drm/i915: Make *_crtc_mode_set work on new_config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@xxxxxxxxx>

This shouldn't change the behavior of those functions, since they are
called after the new_config is made effective and that points to the
current config. In a follow up patch, the mode set sequence will be
changed so this is called before disabling crtcs, and in that case
those functions should work on the staged config.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_ddi.c     |   4 +-
 drivers/gpu/drm/i915/intel_display.c | 167 +++++++++++++++++++++--------------
 2 files changed, 101 insertions(+), 70 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index cb5367c..619723d 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -792,7 +792,7 @@ hsw_ddi_pll_select(struct intel_crtc *intel_crtc,
 		      WRPLL_DIVIDER_REFERENCE(r2) | WRPLL_DIVIDER_FEEDBACK(n2) |
 		      WRPLL_DIVIDER_POST(p);
 
-		intel_crtc->config.dpll_hw_state.wrpll = val;
+		intel_crtc->new_config->dpll_hw_state.wrpll = val;
 
 		pll = intel_get_shared_dpll(intel_crtc);
 		if (pll == NULL) {
@@ -801,7 +801,7 @@ hsw_ddi_pll_select(struct intel_crtc *intel_crtc,
 			return false;
 		}
 
-		intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_WRPLL(pll->id);
+		intel_crtc->new_config->ddi_pll_sel = PORT_CLK_SEL_WRPLL(pll->id);
 	}
 
 	return true;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3a06c3d..9d8fe8d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -420,13 +420,32 @@ static bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
 	return false;
 }
 
+/**
+ * Returns whether any output on the specified pipe will have the specified
+ * type after a staged modeset is complete, i.e., the same as
+ * intel_pipe_has_type() but looking at encoder->new_crtc instead of
+ * encoder->crtc.
+ */
+static bool intel_pipe_will_have_type(struct drm_crtc *crtc, int type)
+{
+	struct drm_device *dev = crtc->dev;
+	struct intel_encoder *encoder;
+
+	for_each_intel_encoder(dev, encoder)
+		if (encoder->new_crtc == to_intel_crtc(crtc) &&
+		    encoder->type == type)
+			return true;
+
+	return false;
+}
+
 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
 						int refclk)
 {
 	struct drm_device *dev = crtc->dev;
 	const intel_limit_t *limit;
 
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+	if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
 		if (intel_is_dual_link_lvds(dev)) {
 			if (refclk == 100000)
 				limit = &intel_limits_ironlake_dual_lvds_100m;
@@ -449,15 +468,15 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	const intel_limit_t *limit;
 
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+	if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
 		if (intel_is_dual_link_lvds(dev))
 			limit = &intel_limits_g4x_dual_channel_lvds;
 		else
 			limit = &intel_limits_g4x_single_channel_lvds;
-	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
-		   intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
+	} else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_HDMI) ||
+		   intel_pipe_will_have_type(crtc, INTEL_OUTPUT_ANALOG)) {
 		limit = &intel_limits_g4x_hdmi;
-	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
+	} else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_SDVO)) {
 		limit = &intel_limits_g4x_sdvo;
 	} else /* The option is for other outputs */
 		limit = &intel_limits_i9xx_sdvo;
@@ -475,7 +494,7 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
 	else if (IS_G4X(dev)) {
 		limit = intel_g4x_limit(crtc);
 	} else if (IS_PINEVIEW(dev)) {
-		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+		if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
 			limit = &intel_limits_pineview_lvds;
 		else
 			limit = &intel_limits_pineview_sdvo;
@@ -484,14 +503,14 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
 	} else if (IS_VALLEYVIEW(dev)) {
 		limit = &intel_limits_vlv;
 	} else if (!IS_GEN2(dev)) {
-		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+		if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
 			limit = &intel_limits_i9xx_lvds;
 		else
 			limit = &intel_limits_i9xx_sdvo;
 	} else {
-		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+		if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
 			limit = &intel_limits_i8xx_lvds;
-		else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO))
+		else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_DVO))
 			limit = &intel_limits_i8xx_dvo;
 		else
 			limit = &intel_limits_i8xx_dac;
@@ -586,7 +605,7 @@ i9xx_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
 	intel_clock_t clock;
 	int err = target;
 
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+	if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
 		/*
 		 * For LVDS just rely on its current settings for dual-channel.
 		 * We haven't figured out how to reliably set up different
@@ -647,7 +666,7 @@ pnv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
 	intel_clock_t clock;
 	int err = target;
 
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+	if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
 		/*
 		 * For LVDS just rely on its current settings for dual-channel.
 		 * We haven't figured out how to reliably set up different
@@ -710,7 +729,7 @@ g4x_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
 	int err_most = (target >> 8) + (target >> 9);
 	found = false;
 
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+	if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
 		if (intel_is_dual_link_lvds(dev))
 			clock.p2 = limit->p2.p2_fast;
 		else
@@ -5607,7 +5626,7 @@ static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
 
 	if (IS_VALLEYVIEW(dev)) {
 		refclk = 100000;
-	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	} else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
 	    intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
 		refclk = dev_priv->vbt.lvds_ssc_freq;
 		DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
@@ -5758,11 +5777,11 @@ static void vlv_update_pll(struct intel_crtc *crtc)
 	if (crtc->pipe == PIPE_B)
 		dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
 	dpll |= DPLL_VCO_ENABLE;
-	crtc->config.dpll_hw_state.dpll = dpll;
+	crtc->new_config->dpll_hw_state.dpll = dpll;
 
-	dpll_md = (crtc->config.pixel_multiplier - 1)
+	dpll_md = (crtc->new_config->pixel_multiplier - 1)
 		<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
-	crtc->config.dpll_hw_state.dpll_md = dpll_md;
+	crtc->new_config->dpll_hw_state.dpll_md = dpll_md;
 }
 
 static void vlv_prepare_pll(struct intel_crtc *crtc)
@@ -5858,14 +5877,16 @@ static void vlv_prepare_pll(struct intel_crtc *crtc)
 
 static void chv_update_pll(struct intel_crtc *crtc)
 {
-	crtc->config.dpll_hw_state.dpll = DPLL_SSC_REF_CLOCK_CHV |
+	crtc->new_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLOCK_CHV |
 		DPLL_REFA_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
 		DPLL_VCO_ENABLE;
 	if (crtc->pipe != PIPE_A)
-		crtc->config.dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
+		crtc->new_config->dpll_hw_state.dpll |=
+			DPLL_INTEGRATED_CRI_CLK_VLV;
 
-	crtc->config.dpll_hw_state.dpll_md =
-		(crtc->config.pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+	crtc->new_config->dpll_hw_state.dpll_md =
+		(crtc->new_config->pixel_multiplier - 1)
+		<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
 }
 
 static void chv_prepare_pll(struct intel_crtc *crtc)
@@ -5946,29 +5967,29 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 dpll;
 	bool is_sdvo;
-	struct dpll *clock = &crtc->config.dpll;
+	struct dpll *clock = &crtc->new_config->dpll;
 
 	i9xx_update_pll_dividers(crtc, reduced_clock);
 
-	is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
-		intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
+	is_sdvo = intel_pipe_will_have_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
+		intel_pipe_will_have_type(&crtc->base, INTEL_OUTPUT_HDMI);
 
 	dpll = DPLL_VGA_MODE_DIS;
 
-	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS))
+	if (intel_pipe_will_have_type(&crtc->base, INTEL_OUTPUT_LVDS))
 		dpll |= DPLLB_MODE_LVDS;
 	else
 		dpll |= DPLLB_MODE_DAC_SERIAL;
 
 	if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
-		dpll |= (crtc->config.pixel_multiplier - 1)
+		dpll |= (crtc->new_config->pixel_multiplier - 1)
 			<< SDVO_MULTIPLIER_SHIFT_HIRES;
 	}
 
 	if (is_sdvo)
 		dpll |= DPLL_SDVO_HIGH_SPEED;
 
-	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
+	if (intel_pipe_will_have_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
 		dpll |= DPLL_SDVO_HIGH_SPEED;
 
 	/* compute bitmask from p1 value */
@@ -5996,21 +6017,21 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
 	if (INTEL_INFO(dev)->gen >= 4)
 		dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
 
-	if (crtc->config.sdvo_tv_clock)
+	if (crtc->new_config->sdvo_tv_clock)
 		dpll |= PLL_REF_INPUT_TVCLKINBC;
-	else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
+	else if (intel_pipe_will_have_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
 		 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
 		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
 	else
 		dpll |= PLL_REF_INPUT_DREFCLK;
 
 	dpll |= DPLL_VCO_ENABLE;
-	crtc->config.dpll_hw_state.dpll = dpll;
+	crtc->new_config->dpll_hw_state.dpll = dpll;
 
 	if (INTEL_INFO(dev)->gen >= 4) {
-		u32 dpll_md = (crtc->config.pixel_multiplier - 1)
+		u32 dpll_md = (crtc->new_config->pixel_multiplier - 1)
 			<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
-		crtc->config.dpll_hw_state.dpll_md = dpll_md;
+		crtc->new_config->dpll_hw_state.dpll_md = dpll_md;
 	}
 }
 
@@ -6021,13 +6042,13 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 dpll;
-	struct dpll *clock = &crtc->config.dpll;
+	struct dpll *clock = &crtc->new_config->dpll;
 
 	i9xx_update_pll_dividers(crtc, reduced_clock);
 
 	dpll = DPLL_VGA_MODE_DIS;
 
-	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)) {
+	if (intel_pipe_will_have_type(&crtc->base, INTEL_OUTPUT_LVDS)) {
 		dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
 	} else {
 		if (clock->p1 == 2)
@@ -6038,17 +6059,18 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
 			dpll |= PLL_P2_DIVIDE_BY_4;
 	}
 
-	if (!IS_I830(dev) && intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
+	if (!IS_I830(dev) &&
+	    intel_pipe_will_have_type(&crtc->base, INTEL_OUTPUT_DVO))
 		dpll |= DPLL_DVO_2X_MODE;
 
-	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
+	if (intel_pipe_will_have_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
 		 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
 		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
 	else
 		dpll |= PLL_REF_INPUT_DREFCLK;
 
 	dpll |= DPLL_VCO_ENABLE;
-	crtc->config.dpll_hw_state.dpll = dpll;
+	crtc->new_config->dpll_hw_state.dpll = dpll;
 }
 
 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
@@ -6258,7 +6280,10 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 	struct intel_encoder *encoder;
 	const intel_limit_t *limit;
 
-	for_each_encoder_on_crtc(dev, crtc, encoder) {
+	for_each_intel_encoder(dev, encoder) {
+		if (encoder->new_crtc != to_intel_crtc(crtc))
+			continue;
+
 		switch (encoder->type) {
 		case INTEL_OUTPUT_LVDS:
 			is_lvds = true;
@@ -6274,7 +6299,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 	if (is_dsi)
 		return 0;
 
-	if (!intel_crtc->config.clock_set) {
+	if (!intel_crtc->new_config->clock_set) {
 		refclk = i9xx_get_refclk(crtc, num_connectors);
 
 		/*
@@ -6285,7 +6310,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 		 */
 		limit = intel_limit(crtc, refclk);
 		ok = dev_priv->display.find_dpll(limit, crtc,
-						 intel_crtc->config.port_clock,
+						 intel_crtc->new_config->port_clock,
 						 refclk, NULL, &clock);
 		if (!ok) {
 			DRM_ERROR("Couldn't find PLL settings for mode!\n");
@@ -6306,11 +6331,11 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 							    &reduced_clock);
 		}
 		/* Compat-code for transition, will disappear. */
-		intel_crtc->config.dpll.n = clock.n;
-		intel_crtc->config.dpll.m1 = clock.m1;
-		intel_crtc->config.dpll.m2 = clock.m2;
-		intel_crtc->config.dpll.p1 = clock.p1;
-		intel_crtc->config.dpll.p2 = clock.p2;
+		intel_crtc->new_config->dpll.n = clock.n;
+		intel_crtc->new_config->dpll.m1 = clock.m1;
+		intel_crtc->new_config->dpll.m2 = clock.m2;
+		intel_crtc->new_config->dpll.p1 = clock.p1;
+		intel_crtc->new_config->dpll.p2 = clock.p2;
 	}
 
 	if (IS_GEN2(dev)) {
@@ -6926,7 +6951,10 @@ static int ironlake_get_refclk(struct drm_crtc *crtc)
 	int num_connectors = 0;
 	bool is_lvds = false;
 
-	for_each_encoder_on_crtc(dev, crtc, encoder) {
+	for_each_intel_encoder(dev, encoder) {
+		if (encoder->new_crtc != to_intel_crtc(crtc))
+			continue;
+
 		switch (encoder->type) {
 		case INTEL_OUTPUT_LVDS:
 			is_lvds = true;
@@ -7114,7 +7142,7 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
 	const intel_limit_t *limit;
 	bool ret, is_lvds = false;
 
-	is_lvds = intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS);
+	is_lvds = intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS);
 
 	refclk = ironlake_get_refclk(crtc);
 
@@ -7125,7 +7153,7 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
 	 */
 	limit = intel_limit(crtc, refclk);
 	ret = dev_priv->display.find_dpll(limit, crtc,
-					  to_intel_crtc(crtc)->config.port_clock,
+					  to_intel_crtc(crtc)->new_config->port_clock,
 					  refclk, NULL, clock);
 	if (!ret)
 		return false;
@@ -7175,7 +7203,10 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 	int factor, num_connectors = 0;
 	bool is_lvds = false, is_sdvo = false;
 
-	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+	for_each_intel_encoder(dev, intel_encoder) {
+		if (intel_encoder->new_crtc != to_intel_crtc(crtc))
+			continue;
+
 		switch (intel_encoder->type) {
 		case INTEL_OUTPUT_LVDS:
 			is_lvds = true;
@@ -7196,10 +7227,10 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 		     dev_priv->vbt.lvds_ssc_freq == 100000) ||
 		    (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
 			factor = 25;
-	} else if (intel_crtc->config.sdvo_tv_clock)
+	} else if (intel_crtc->new_config->sdvo_tv_clock)
 		factor = 20;
 
-	if (ironlake_needs_fb_cb_tune(&intel_crtc->config.dpll, factor))
+	if (ironlake_needs_fb_cb_tune(&intel_crtc->new_config->dpll, factor))
 		*fp |= FP_CB_TUNE;
 
 	if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
@@ -7212,20 +7243,20 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
 	else
 		dpll |= DPLLB_MODE_DAC_SERIAL;
 
-	dpll |= (intel_crtc->config.pixel_multiplier - 1)
+	dpll |= (intel_crtc->new_config->pixel_multiplier - 1)
 		<< PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 
 	if (is_sdvo)
 		dpll |= DPLL_SDVO_HIGH_SPEED;
-	if (intel_crtc->config.has_dp_encoder)
+	if (intel_crtc->new_config->has_dp_encoder)
 		dpll |= DPLL_SDVO_HIGH_SPEED;
 
 	/* compute bitmask from p1 value */
-	dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+	dpll |= (1 << (intel_crtc->new_config->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
 	/* also FPA1 */
-	dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+	dpll |= (1 << (intel_crtc->new_config->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
 
-	switch (intel_crtc->config.dpll.p2) {
+	switch (intel_crtc->new_config->dpll.p2) {
 	case 5:
 		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
 		break;
@@ -7267,22 +7298,22 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 
 	ok = ironlake_compute_clocks(crtc, &clock,
 				     &has_reduced_clock, &reduced_clock);
-	if (!ok && !intel_crtc->config.clock_set) {
+	if (!ok && !intel_crtc->new_config->clock_set) {
 		DRM_ERROR("Couldn't find PLL settings for mode!\n");
 		return -EINVAL;
 	}
 	/* Compat-code for transition, will disappear. */
-	if (!intel_crtc->config.clock_set) {
-		intel_crtc->config.dpll.n = clock.n;
-		intel_crtc->config.dpll.m1 = clock.m1;
-		intel_crtc->config.dpll.m2 = clock.m2;
-		intel_crtc->config.dpll.p1 = clock.p1;
-		intel_crtc->config.dpll.p2 = clock.p2;
+	if (!intel_crtc->new_config->clock_set) {
+		intel_crtc->new_config->dpll.n = clock.n;
+		intel_crtc->new_config->dpll.m1 = clock.m1;
+		intel_crtc->new_config->dpll.m2 = clock.m2;
+		intel_crtc->new_config->dpll.p1 = clock.p1;
+		intel_crtc->new_config->dpll.p2 = clock.p2;
 	}
 
 	/* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
-	if (intel_crtc->config.has_pch_encoder) {
-		fp = i9xx_dpll_compute_fp(&intel_crtc->config.dpll);
+	if (intel_crtc->new_config->has_pch_encoder) {
+		fp = i9xx_dpll_compute_fp(&intel_crtc->new_config->dpll);
 		if (has_reduced_clock)
 			fp2 = i9xx_dpll_compute_fp(&reduced_clock);
 
@@ -7290,12 +7321,12 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 					     &fp, &reduced_clock,
 					     has_reduced_clock ? &fp2 : NULL);
 
-		intel_crtc->config.dpll_hw_state.dpll = dpll;
-		intel_crtc->config.dpll_hw_state.fp0 = fp;
+		intel_crtc->new_config->dpll_hw_state.dpll = dpll;
+		intel_crtc->new_config->dpll_hw_state.fp0 = fp;
 		if (has_reduced_clock)
-			intel_crtc->config.dpll_hw_state.fp1 = fp2;
+			intel_crtc->new_config->dpll_hw_state.fp1 = fp2;
 		else
-			intel_crtc->config.dpll_hw_state.fp1 = fp;
+			intel_crtc->new_config->dpll_hw_state.fp1 = fp;
 
 		pll = intel_get_shared_dpll(intel_crtc);
 		if (pll == NULL) {
-- 
1.8.3.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux