On Wed, Sep 24, 2014 at 02:20:32PM -0300, Gustavo Padovan wrote:
> From: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
>
> After some refactor intel_primary_plane_setplane() does the same
> as intel_pipe_set_base() so we can get rid of it and replace the calls
> with intel_primary_plane_setplane().
>
> v2: take Ville's comments:
> - get the right arguments for update_plane()
> - use drm_crtc_get_hv_timing()
>
> Signed-off-by: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_display.c | 89 ++++++++----------------------------
> 1 file changed, 18 insertions(+), 71 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 9dd4952..f7c2e5f 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2857,74 +2857,6 @@ static void intel_update_pipe_size(struct intel_crtc *crtc)
> crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay;
> }
>
> -static int
> -intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
> - struct drm_framebuffer *fb)
> -{
> - struct drm_device *dev = crtc->dev;
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - enum pipe pipe = intel_crtc->pipe;
> - struct drm_framebuffer *old_fb = crtc->primary->fb;
> - struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> - struct drm_i915_gem_object *old_obj = intel_fb_obj(old_fb);
> - int ret;
> -
> - if (intel_crtc_has_pending_flip(crtc)) {
> - DRM_ERROR("pipe is still busy with an old pageflip\n");
> - return -EBUSY;
> - }
> -
> - /* no fb bound */
> - if (!fb) {
> - DRM_ERROR("No FB bound\n");
> - return 0;
> - }
> -
> - if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
> - DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n",
> - plane_name(intel_crtc->plane),
> - INTEL_INFO(dev)->num_pipes);
> - return -EINVAL;
> - }
> -
> - mutex_lock(&dev->struct_mutex);
> - ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
> - if (ret == 0)
> - i915_gem_track_fb(old_obj, obj,
> - INTEL_FRONTBUFFER_PRIMARY(pipe));
> - mutex_unlock(&dev->struct_mutex);
> - if (ret != 0) {
> - DRM_ERROR("pin & fence failed\n");
> - return ret;
> - }
> -
> - intel_update_pipe_size(intel_crtc);
> -
> - dev_priv->display.update_primary_plane(crtc, fb, x, y);
> -
> - if (intel_crtc->active)
> - intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
> -
> - crtc->primary->fb = fb;
> - crtc->x = x;
> - crtc->y = y;
> -
> - if (old_fb) {
> - if (intel_crtc->active && old_fb != fb)
> - intel_wait_for_vblank(dev, intel_crtc->pipe);
> - mutex_lock(&dev->struct_mutex);
> - intel_unpin_fb_obj(old_obj);
> - mutex_unlock(&dev->struct_mutex);
> - }
> -
> - mutex_lock(&dev->struct_mutex);
> - intel_update_fbc(dev);
> - mutex_unlock(&dev->struct_mutex);
> -
> - return 0;
> -}
> -
> static void intel_fdi_normal_train(struct drm_crtc *crtc)
> {
> struct drm_device *dev = crtc->dev;
> @@ -9681,6 +9613,8 @@ static int intel_crtc_commit_page_flip(struct drm_crtc *crtc,
> struct drm_framebuffer *old_fb = crtc->primary->fb;
> struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct drm_plane *primary = crtc->primary;
> + struct intel_plane *intel_plane = to_intel_plane(primary);
> enum pipe pipe = intel_crtc->pipe;
> struct intel_unpin_work *work;
> struct intel_engine_cs *ring;
> @@ -9822,7 +9756,15 @@ free_work:
> if (ret == -EIO) {
> out_hang:
> intel_crtc_wait_for_pending_flips(crtc);
> - ret = intel_pipe_set_base(crtc, crtc->x, crtc->y, fb);
> + ret = primary->funcs->update_plane(primary, crtc, fb,
> + intel_plane->crtc_x,
> + intel_plane->crtc_y,
> + intel_plane->crtc_h,
> + intel_plane->crtc_w,
> + intel_plane->src_x,
> + intel_plane->src_y,
> + intel_plane->src_h,
> + intel_plane->src_w);
> if (ret == 0 && event) {
> spin_lock_irq(&dev->event_lock);
> drm_send_vblank_event(dev, pipe, event);
> @@ -11359,11 +11301,16 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
> set->x, set->y, set->fb);
> } else if (config->fb_changed) {
> struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
> + struct drm_plane *primary = set->crtc->primary;
> + int vdisplay, hdisplay;
>
> intel_crtc_wait_for_pending_flips(set->crtc);
>
> - ret = intel_pipe_set_base(set->crtc,
> - set->x, set->y, set->fb);
> + drm_crtc_get_hv_timing(set->mode, &hdisplay, &vdisplay);
> + ret = primary->funcs->update_plane(primary, set->crtc, set->fb,
> + 0, 0, hdisplay, vdisplay,
> + set->x << 16, set->y << 16,
> + hdisplay << 16, vdisplay << 16);
>
These two look like they should do the right thing. But we still have
the mode_change==true path to worry about. If we don't call
update_plane() there we migth never populate intel_plane->crtc_x & co.
So I think you'll just need to replace the small piece of pin/unpin code
in __intel_set_mode() with a call to update_plane(). Since the crtc is
not active at that point it will skip the actual plane register
programming and intel_enable_primary_hw_plane() will later do all that.
> /*
> * We need to make sure the primary plane is re-enabled if it
> --
> 1.9.3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
