From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Add a bunc of symbolic sideband unit names so that you don't have to go trawling through the sideband HAS every time you want to poke at something with the tool. You can still specify the port manually though if you know them by heart already. Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- tools/intel_iosf_sb_read.c | 24 ++++++++++++++++++++++-- tools/intel_iosf_sb_write.c | 26 +++++++++++++++++++++++--- 2 files changed, 45 insertions(+), 5 deletions(-) diff --git a/tools/intel_iosf_sb_read.c b/tools/intel_iosf_sb_read.c index f7ff64a..8f35e50 100644 --- a/tools/intel_iosf_sb_read.c +++ b/tools/intel_iosf_sb_read.c @@ -48,13 +48,33 @@ int main(int argc, char *argv[]) return 1; } - port = strtoul(argv[1], NULL, 16); + if (!strcasecmp(argv[1], "bunit")) + port = 0x03; + else if (!strcasecmp(argv[1], "punit")) + port = 0x04; + else if (!strcasecmp(argv[1], "nc")) + port = 0x11; + else if (!strcasecmp(argv[1], "dpio")) + port = 0x13; + else if (!strcasecmp(argv[1], "gpio_nc")) + port = 0x13; + else if (!strcasecmp(argv[1], "cck")) + port = 0x14; + else if (!strcasecmp(argv[1], "ccu")) + port = 0xa9; + else if (!strcasecmp(argv[1], "dpio2")) + port = 0x1a; + else if (!strcasecmp(argv[1], "flisdsi")) + port = 0x1b; + else + port = strtoul(argv[1], NULL, 16); + reg = strtoul(argv[2], NULL, 16); intel_register_access_init(dev, 0); val = intel_iosf_sb_read(port, reg); - printf("0x%02x/0x%04x : 0x%08x\n", port, reg, val); + printf("0x%02x(%s)/0x%04x : 0x%08x\n", port, argv[1], reg, val); intel_register_access_fini(); diff --git a/tools/intel_iosf_sb_write.c b/tools/intel_iosf_sb_write.c index 251b660..8d06380 100644 --- a/tools/intel_iosf_sb_write.c +++ b/tools/intel_iosf_sb_write.c @@ -47,19 +47,39 @@ int main(int argc, char** argv) return 1; } - port = strtoul(argv[1], NULL, 16); + if (!strcasecmp(argv[1], "bunit")) + port = 0x03; + else if (!strcasecmp(argv[1], "punit")) + port = 0x04; + else if (!strcasecmp(argv[1], "nc")) + port = 0x11; + else if (!strcasecmp(argv[1], "dpio")) + port = 0x13; + else if (!strcasecmp(argv[1], "gpio_nc")) + port = 0x13; + else if (!strcasecmp(argv[1], "cck")) + port = 0x14; + else if (!strcasecmp(argv[1], "ccu")) + port = 0xa9; + else if (!strcasecmp(argv[1], "dpio2")) + port = 0x1a; + else if (!strcasecmp(argv[1], "flisdsi")) + port = 0x1b; + else + port = strtoul(argv[1], NULL, 16); + reg = strtoul(argv[2], NULL, 16); val = strtoul(argv[3], NULL, 16); intel_register_access_init(dev, 0); tmp = intel_iosf_sb_read(port, reg); - printf("Value before: 0x%X\n", tmp); + printf("0x%02x(%s)/0x%04x before : 0x%08x\n", port, argv[1], reg, tmp); intel_iosf_sb_write(port, reg, val); tmp = intel_iosf_sb_read(port, reg); - printf("Value after: 0x%X\n", tmp); + printf("0x%02x(%s)/0x%04x after : 0x%08x\n", port, argv[1], reg, tmp); intel_register_access_fini(); -- 1.8.5.5 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx