On 15.08.2014 00:22, ville.syrjala@xxxxxxxxxxxxxxx wrote:
From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
The vbt on my Fujitsu-Siemens Lifebook S6010 provides two 800x600 modes,
60Hz and 56Hz. The magic register values we have correspond to the 60Hz
mode, and as I don't know how one would trick the VGA BIOS to set up
the 56Hz mode we can't get the magic values for the orther mode. So
when checking whether a mode is valid also check the pixel clock so that
we filter out the 56Hz variant.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Reviewed-by: Thomas Richter <richter@xxxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/dvo_ns2501.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/dvo_ns2501.c b/drivers/gpu/drm/i915/dvo_ns2501.c
index 345235b..4416304 100644
--- a/drivers/gpu/drm/i915/dvo_ns2501.c
+++ b/drivers/gpu/drm/i915/dvo_ns2501.c
@@ -521,9 +521,9 @@ static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo,
* of the panel in here so we could always accept it
* by disabling the scaler.
*/
- if ((mode->hdisplay == 800 && mode->vdisplay == 600) ||
- (mode->hdisplay == 640 && mode->vdisplay == 480) ||
- (mode->hdisplay == 1024 && mode->vdisplay == 768)) {
+ if ((mode->hdisplay == 640 && mode->vdisplay == 480 && mode->clock == 25175) ||
+ (mode->hdisplay == 800 && mode->vdisplay == 600 && mode->clock == 40000) ||
+ (mode->hdisplay == 1024 && mode->vdisplay == 768 && mode->clock == 65000)) {
return MODE_OK;
} else {
return MODE_ONE_SIZE; /* Is this a reasonable error? */
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
