[PATCH 13/16] drm/i915: Fix DVO 2x clock enable on 830M

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

The spec says:
"For the correct operation of the muxed DVO pins (GDEVSELB/ I2Cdata,
GIRDBY/I2CClk) and (GFRAMEB/DVI_Data, GTRDYB/DVI_Clk): Bit 31
(DPLL VCO Enable) and Bit 30 (2X Clock Enable) must be set to “1” in
both the DPLL A Control Register (06014h-06017h) and DPLL B Control
Register (06018h-0601Bh)."

The pipe A and B force quirks take care of DPLL_VCO_ENABLE, so we
just need a bit of special care to handle DPLL_DVO_2X_MODE.

Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/i915_drv.h      |  3 +++
 drivers/gpu/drm/i915/intel_display.c | 47 +++++++++++++++++++++++++++++++++---
 2 files changed, 46 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 541fb6f..54895a6 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1561,6 +1561,9 @@ struct drm_i915_private {
 
 	u16 orig_clock;
 
+	/* used to control DVO 2x clock enable on 830M */
+	uint8_t dvo_pipes;
+
 	bool mchbar_need_disable;
 
 	struct intel_l3_parity l3_parity;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3eeb5ce..6462bcf 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1548,6 +1548,7 @@ static void i9xx_enable_pll(struct intel_crtc *crtc)
 {
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum pipe pipe = crtc->pipe;
 	int reg = DPLL(crtc->pipe);
 	u32 dpll = crtc->config.dpll_hw_state.dpll;
 
@@ -1560,7 +1561,16 @@ static void i9xx_enable_pll(struct intel_crtc *crtc)
 	if (IS_MOBILE(dev) && !IS_I830(dev))
 		assert_panel_unlocked(dev_priv, crtc->pipe);
 
-	I915_WRITE(reg, dpll);
+	/* enable DVO 2x clock on both PLLs if necessary */
+	if (IS_I830(dev)) {
+		if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
+			dev_priv->dvo_pipes |= 1 << pipe;
+
+		if (dev_priv->dvo_pipes) {
+			dpll |= DPLL_DVO_2X_MODE;
+			I915_WRITE(DPLL(!pipe), I915_READ(DPLL(!pipe)) | DPLL_DVO_2X_MODE);
+		}
+	}
 
 	/* Wait for the clocks to stabilize. */
 	POSTING_READ(reg);
@@ -1599,8 +1609,23 @@ static void i9xx_enable_pll(struct intel_crtc *crtc)
  *
  * Note!  This is for pre-ILK only.
  */
-static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+static void i9xx_disable_pll(struct intel_crtc *crtc)
 {
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum pipe pipe = crtc->pipe;
+
+	/* disable DVO 2x clock on both PLLs if necessary */
+	if (IS_I830(dev)) {
+		if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
+			dev_priv->dvo_pipes &= ~(1 << pipe);
+
+		if (!dev_priv->dvo_pipes) {
+			I915_WRITE(DPLL(pipe), I915_READ(DPLL(pipe)) & ~DPLL_DVO_2X_MODE);
+			I915_WRITE(DPLL(!pipe), I915_READ(DPLL(!pipe)) & ~DPLL_DVO_2X_MODE);
+		}
+	}
+
 	/* Don't disable pipe A or pipe A PLLs if needed */
 	if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
 		return;
@@ -4788,7 +4813,7 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 		else if (IS_VALLEYVIEW(dev))
 			vlv_disable_pll(dev_priv, pipe);
 		else
-			i9xx_disable_pll(dev_priv, pipe);
+			i9xx_disable_pll(intel_crtc);
 	}
 
 	if (!IS_GEN2(dev))
@@ -5792,7 +5817,7 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
 			dpll |= PLL_P2_DIVIDE_BY_4;
 	}
 
-	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
+	if (!IS_I830(dev) && intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
 		dpll |= DPLL_DVO_2X_MODE;
 
 	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
@@ -6298,6 +6323,9 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 	}
 	pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
 	if (!IS_VALLEYVIEW(dev)) {
+		if (IS_I830(dev))
+			pipe_config->dpll_hw_state.dpll &= ~DPLL_DVO_2X_MODE;
+
 		pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
 		pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
 	} else {
@@ -13021,6 +13049,17 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 		}
 	}
 
+	/* update dvo_pipes */
+	if (IS_I830(dev)) {
+		dev_priv->dvo_pipes = 0;
+
+		for_each_intel_crtc(dev, crtc) {
+			if (crtc->active &&
+			    intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
+				dev_priv->dvo_pipes |= 1 << crtc->pipe;
+		}
+	}
+
 	/* HW state is read out, now we need to sanitize this mess. */
 	for_each_intel_encoder(dev, encoder) {
 		intel_sanitize_encoder(encoder);
-- 
1.8.5.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux