On Fri, Aug 08, 2014 at 03:54:04PM +0200, Thomas Jarosch wrote: > New Intel G3258 CPU, new MSI board, same problem: > The GPU interrupt fired like crazy on monitor unplug. > > lspci output: > 00:02.0 VGA compatible controller: Intel Corporation Device 0402 (rev 06) > Subsystem: Micro-Star International Co., Ltd. Device 7817 > Flags: bus master, fast devsel, latency 0, IRQ 11 > > Signed-off-by: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx> > Tested-by: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx> > CC: stable@xxxxxxxxxxxxxxx # v3.4+ > --- > drivers/pci/quirks.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > index 80c2d01..d2ff39d 100644 > --- a/drivers/pci/quirks.c > +++ b/drivers/pci/quirks.c > @@ -2940,6 +2940,7 @@ static void disable_igfx_irq(struct pci_dev *dev) > DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); > DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); > DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); > +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0402, disable_igfx_irq); Shouldn't we just add entries for them all? See include/drm/i915_pciids.h We might need to abstract the macro magic a bit though to reuse that list. Also note that not all have the DEIER register. In any case I don't think this game of whack-a-mole here is, we should plug this all for real. -Daniel > > /* > * PCI devices which are on Intel chips can skip the 10ms delay > -- > 1.9.3 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
