[PATCH v8 2/2] drm/i915: State readout and cross-checking for dp_m2_n2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Adding relevant read out comparison code, in check_crtc_state, for the new
member of crtc_config, dp_m2_n2, which was introduced to store link_m_n
values for a DP downclock mode (if available). Suggested by Daniel.

v2: Changed patch title.
Daniel's review comments incorporated.
Added relevant state readout code for M2_N2. dp_m2_n2 comparison to be done
only when high RR is not in use (This is because alternate m_n register
programming will be done only when low RR is being used).

v3: Modified call to get_m2_n2 which had dp_m_n as param by mistake.
Compare dp_m_n and dp_m2_n2 for gen 7 and below. compare the structures
based on DRRS state for gen 8 and above.
Save and restore M2 N2 registers for gen 7 and below

v4: For Gen>=8, check M_N registers against dp_m_n and dp_m2_n2 as there is
only one set of M_N registers

v5: Removed the chunk which saves and restores M2_N2 registers. Modified
get_m_n() to get M2_N2 registers as well. Modified the macro which compares
hw.dp_m_n against sw.dp_m2_n2/sw.dp_m_n for gen > 8.

v6: Added check to compare dp_m2_n2 only when DRRS is enabled

v7: Modified drrs check to use has_drrs

v8: Add has_drrs check before reading M2_N2 registers

Signed-off-by: Vandana Kannan <vandana.kannan@xxxxxxxxx>
Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
Cc: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_display.c | 75 ++++++++++++++++++++++++++++++++----
 1 file changed, 67 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9f651a6..87481f4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7138,7 +7138,8 @@ static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
 
 static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
 					 enum transcoder transcoder,
-					 struct intel_link_m_n *m_n)
+					 struct intel_link_m_n *m_n,
+					 struct intel_link_m_n *m2_n2)
 {
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -7152,6 +7153,20 @@ static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
 		m_n->gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
 		m_n->tu = ((I915_READ(PIPE_DATA_M1(transcoder))
 			    & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
+		/* Read M2_N2 registers only for gen < 8 (M2_N2 available for
+		 * gen < 8) and if DRRS is supported (to make sure the
+		 * registers are not unnecessarily read).
+		 */
+		if (m2_n2 && INTEL_INFO(dev)->gen < 8 &&
+			crtc->config.has_drrs) {
+			m2_n2->link_m = I915_READ(PIPE_LINK_M2(transcoder));
+			m2_n2->link_n =	I915_READ(PIPE_LINK_N2(transcoder));
+			m2_n2->gmch_m =	I915_READ(PIPE_DATA_M2(transcoder))
+					& ~TU_SIZE_MASK;
+			m2_n2->gmch_n =	I915_READ(PIPE_DATA_N2(transcoder));
+			m2_n2->tu = ((I915_READ(PIPE_DATA_M2(transcoder))
+					& TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
+		}
 	} else {
 		m_n->link_m = I915_READ(PIPE_LINK_M_G4X(pipe));
 		m_n->link_n = I915_READ(PIPE_LINK_N_G4X(pipe));
@@ -7170,14 +7185,15 @@ void intel_dp_get_m_n(struct intel_crtc *crtc,
 		intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n);
 	else
 		intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
-					     &pipe_config->dp_m_n);
+					     &pipe_config->dp_m_n,
+					     &pipe_config->dp_m2_n2);
 }
 
 static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
 					struct intel_crtc_config *pipe_config)
 {
 	intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
-				     &pipe_config->fdi_m_n);
+				     &pipe_config->fdi_m_n, NULL);
 }
 
 static void ironlake_get_pfit_config(struct intel_crtc *crtc,
@@ -9932,6 +9948,15 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 		      pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
 		      pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
 		      pipe_config->dp_m_n.tu);
+
+	DRM_DEBUG_KMS("dp: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
+		      pipe_config->has_dp_encoder,
+		      pipe_config->dp_m2_n2.gmch_m,
+		      pipe_config->dp_m2_n2.gmch_n,
+		      pipe_config->dp_m2_n2.link_m,
+		      pipe_config->dp_m2_n2.link_n,
+		      pipe_config->dp_m2_n2.tu);
+
 	DRM_DEBUG_KMS("requested mode:\n");
 	drm_mode_debug_printmodeline(&pipe_config->requested_mode);
 	DRM_DEBUG_KMS("adjusted mode:\n");
@@ -10312,6 +10337,22 @@ intel_pipe_config_compare(struct drm_device *dev,
 		return false; \
 	}
 
+/* This is required for BDW+ where there is only one set of registers for
+ * switching between high and low RR.
+ * This macro can be used whenever a comparison has to be made between one
+ * hw state and multiple sw state variables.
+ */
+#define PIPE_CONF_CHECK_I_ALT(name, alt_name) \
+	if ((current_config->name != pipe_config->name) && \
+		(current_config->alt_name != pipe_config->name)) { \
+			DRM_ERROR("mismatch in " #name " " \
+				  "(expected %i or %i, found %i)\n", \
+				  current_config->name, \
+				  current_config->alt_name, \
+				  pipe_config->name); \
+			return false; \
+	}
+
 #define PIPE_CONF_CHECK_FLAGS(name, mask)	\
 	if ((current_config->name ^ pipe_config->name) & (mask)) { \
 		DRM_ERROR("mismatch in " #name "(" #mask ") "	   \
@@ -10344,11 +10385,28 @@ intel_pipe_config_compare(struct drm_device *dev,
 	PIPE_CONF_CHECK_I(fdi_m_n.tu);
 
 	PIPE_CONF_CHECK_I(has_dp_encoder);
-	PIPE_CONF_CHECK_I(dp_m_n.gmch_m);
-	PIPE_CONF_CHECK_I(dp_m_n.gmch_n);
-	PIPE_CONF_CHECK_I(dp_m_n.link_m);
-	PIPE_CONF_CHECK_I(dp_m_n.link_n);
-	PIPE_CONF_CHECK_I(dp_m_n.tu);
+
+	if (INTEL_INFO(dev)->gen < 8) {
+		PIPE_CONF_CHECK_I(dp_m_n.gmch_m);
+		PIPE_CONF_CHECK_I(dp_m_n.gmch_n);
+		PIPE_CONF_CHECK_I(dp_m_n.link_m);
+		PIPE_CONF_CHECK_I(dp_m_n.link_n);
+		PIPE_CONF_CHECK_I(dp_m_n.tu);
+
+		if (current_config->has_drrs) {
+			PIPE_CONF_CHECK_I(dp_m2_n2.gmch_m);
+			PIPE_CONF_CHECK_I(dp_m2_n2.gmch_n);
+			PIPE_CONF_CHECK_I(dp_m2_n2.link_m);
+			PIPE_CONF_CHECK_I(dp_m2_n2.link_n);
+			PIPE_CONF_CHECK_I(dp_m2_n2.tu);
+		}
+	} else {
+		PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_m, dp_m2_n2.gmch_m);
+		PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_n, dp_m2_n2.gmch_n);
+		PIPE_CONF_CHECK_I_ALT(dp_m_n.link_m, dp_m2_n2.link_m);
+		PIPE_CONF_CHECK_I_ALT(dp_m_n.link_n, dp_m2_n2.link_n);
+		PIPE_CONF_CHECK_I_ALT(dp_m_n.tu, dp_m2_n2.tu);
+	}
 
 	PIPE_CONF_CHECK_I(adjusted_mode.crtc_hdisplay);
 	PIPE_CONF_CHECK_I(adjusted_mode.crtc_htotal);
@@ -10431,6 +10489,7 @@ intel_pipe_config_compare(struct drm_device *dev,
 
 #undef PIPE_CONF_CHECK_X
 #undef PIPE_CONF_CHECK_I
+#undef PIPE_CONF_CHECK_I_ALT
 #undef PIPE_CONF_CHECK_FLAGS
 #undef PIPE_CONF_CHECK_CLOCK_FUZZY
 #undef PIPE_CONF_QUIRK
-- 
1.9.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux