Reuse the same reclocking strategy for Baytail as on its bigger brethren,
Sandybridge and Ivybridge. In particular, this makes the device quicker
to reclock (both up and down) though the tendency now is to downclock
more aggressively to compensate for the RPS boosts.
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Cc: Deepak S <deepak.s@xxxxxxxxxxxxxxx>
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
---
drivers/gpu/drm/i915/i915_debugfs.c | 4 ++--
drivers/gpu/drm/i915/i915_drv.h | 3 +++
drivers/gpu/drm/i915/i915_irq.c | 4 ++--
drivers/gpu/drm/i915/i915_reg.h | 2 --
drivers/gpu/drm/i915/intel_pm.c | 11 ++++++++++-
5 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index c1741799d673..0c538bf398e5 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1198,9 +1198,9 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
seq_puts(m, "\n");
seq_printf(m, "RP CONTROL: 0x%08x\n", rpmodectl);
seq_printf(m, "RP UP EI: 0x%08x\n", rpupei);
- seq_printf(m, "RP UP THRESHOLD: 0x%08x\n", rpinclimit);
+ seq_printf(m, "RP UP THRESHOLD: 0x%08x [%d%%]\n", rpinclimit, dev_priv->rps.up_threshold);
seq_printf(m, "RP DOWN EI: 0x%08x\n", rpdownei);
- seq_printf(m, "RP DOWN THRESHOLD: 0x%08x\n", rpdeclimit);
+ seq_printf(m, "RP DOWN THRESHOLD: 0x%08x [%d%%]\n", rpdeclimit, dev_priv->rps.down_threshold);
seq_printf(m, "RP CUR UP EI: %dus\n", rpcurupei &
GEN6_CURICONT_MASK);
seq_printf(m, "RP CUR UP: %dus\n", rpcurup &
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 149015b5cb24..65e440a9a086 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -937,6 +937,9 @@ struct intel_gen6_power_mgmt {
u8 rp1_freq; /* "less than" RP0 power/freqency */
u8 rp0_freq; /* Non-overclocked max frequency. */
+ u8 up_threshold; /* Current %busy required to uplock */
+ u8 down_threshold; /* Current %busy required to downclock */
+
int last_adj;
enum { LOW_POWER, BETWEEN, HIGH_POWER } power;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 43bd40cc75a6..041aa0b3d7d8 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1323,7 +1323,7 @@ static u32 vlv_wa_c0_ei(struct drm_i915_private *dev_priv, u32 pm_iir)
if (pm_iir & GEN6_PM_RP_DOWN_EI_EXPIRED) {
if (!vlv_c0_above(dev_priv,
&dev_priv->rps.down_ei, &now,
- VLV_RP_DOWN_EI_THRESHOLD))
+ dev_priv->rps.down_threshold))
events |= GEN6_PM_RP_DOWN_THRESHOLD;
dev_priv->rps.down_ei = now;
}
@@ -1331,7 +1331,7 @@ static u32 vlv_wa_c0_ei(struct drm_i915_private *dev_priv, u32 pm_iir)
if (pm_iir & GEN6_PM_RP_UP_EI_EXPIRED) {
if (vlv_c0_above(dev_priv,
&dev_priv->rps.up_ei, &now,
- VLV_RP_UP_EI_THRESHOLD))
+ dev_priv->rps.up_threshold))
events |= GEN6_PM_RP_UP_THRESHOLD;
dev_priv->rps.up_ei = now;
}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5571f7714f78..dc808b0f6577 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -564,8 +564,6 @@ enum punit_power_well {
#define FB_FMAX_VMIN_FREQ_LO_MASK 0xf8000000
#define VLV_CZ_CLOCK_TO_MILLI_SEC 100000
-#define VLV_RP_UP_EI_THRESHOLD 90
-#define VLV_RP_DOWN_EI_THRESHOLD 70
/* vlv2 north clock has */
#define CCK_FUSE_REG 0x8
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 1b1713e37d16..20296e3ea650 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3117,10 +3117,12 @@ static void gen6_set_rps_thresholds(struct drm_i915_private *dev_priv, u8 val)
switch (new_power) {
case LOW_POWER:
/* Upclock if more than 95% busy over 16ms */
+ dev_priv->rps.up_threshold = 95;
I915_WRITE(GEN6_RP_UP_EI, 12500);
I915_WRITE(GEN6_RP_UP_THRESHOLD, 11800);
/* Downclock if less than 85% busy over 32ms */
+ dev_priv->rps.down_threshold = 85;
I915_WRITE(GEN6_RP_DOWN_EI, 25000);
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 21250);
@@ -3135,10 +3137,12 @@ static void gen6_set_rps_thresholds(struct drm_i915_private *dev_priv, u8 val)
case BETWEEN:
/* Upclock if more than 90% busy over 13ms */
+ dev_priv->rps.up_threshold = 90;
I915_WRITE(GEN6_RP_UP_EI, 10250);
I915_WRITE(GEN6_RP_UP_THRESHOLD, 9225);
/* Downclock if less than 75% busy over 32ms */
+ dev_priv->rps.down_threshold = 75;
I915_WRITE(GEN6_RP_DOWN_EI, 25000);
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 18750);
@@ -3153,10 +3157,12 @@ static void gen6_set_rps_thresholds(struct drm_i915_private *dev_priv, u8 val)
case HIGH_POWER:
/* Upclock if more than 85% busy over 10ms */
+ dev_priv->rps.up_threshold = 85;
I915_WRITE(GEN6_RP_UP_EI, 8000);
I915_WRITE(GEN6_RP_UP_THRESHOLD, 6800);
/* Downclock if less than 60% busy over 32ms */
+ dev_priv->rps.down_threshold = 60;
I915_WRITE(GEN6_RP_DOWN_EI, 25000);
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 15000);
@@ -3274,6 +3280,7 @@ static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
& GENFREQSTATUS) == 0, 5))
DRM_ERROR("timed out waiting for Punit\n");
+ gen6_set_rps_thresholds(dev_priv, val);
vlv_force_gfx_clock(dev_priv, false);
I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val));
@@ -3335,8 +3342,10 @@ void valleyview_set_rps(struct drm_device *dev, u8 val)
dev_priv->rps.cur_freq,
vlv_gpu_freq(dev_priv, val), val);
- if (val != dev_priv->rps.cur_freq)
+ if (val != dev_priv->rps.cur_freq) {
vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val);
+ gen6_set_rps_thresholds(dev_priv, val);
+ }
I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val));
--
2.0.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
