We should keep DEVICE_READY bit set in the ULPS enter sequence. In exit sequence also we should set DEVICE_READY, but thats causing blankout for me. Also exit sequence is simplified as per hw team recommendation. This should fix - [drm:intel_dsi_clear_device_ready] *ERROR* DSI LP not going Low Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80818 Signed-off-by: Shobhit Kumar <shobhit.kumar@xxxxxxxxx> --- drivers/gpu/drm/i915/intel_dsi.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index a6a1355..967a5b6 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -117,17 +117,18 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder) /* bandgap reset is needed after everytime we do power gate */ band_gap_reset(dev_priv); + I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + usleep_range(2500, 3000); + val = I915_READ(MIPI_PORT_CTRL(pipe)); I915_WRITE(MIPI_PORT_CTRL(pipe), val | LP_OUTPUT_HOLD); usleep_range(1000, 1500); - I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT); - usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY); - usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00); - usleep_range(2000, 2500); + + I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT); + usleep_range(2500, 3000); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY); - usleep_range(2000, 2500); + usleep_range(2500, 3000); } static void intel_dsi_enable(struct intel_encoder *encoder) @@ -271,23 +272,23 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) DRM_DEBUG_KMS("\n"); - I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER); usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT); usleep_range(2000, 2500); - I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER); usleep_range(2000, 2500); - val = I915_READ(MIPI_PORT_CTRL(pipe)); - I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD); - usleep_range(1000, 1500); - if (wait_for(((I915_READ(MIPI_PORT_CTRL(pipe)) & AFE_LATCHOUT) == 0x00000), 30)) DRM_ERROR("DSI LP not going Low\n"); + val = I915_READ(MIPI_PORT_CTRL(pipe)); + I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD); + usleep_range(1000, 1500); + I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00); usleep_range(2000, 2500); -- 1.9.1 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx
