On Fri, May 30, 2014 at 09:07:19AM +0300, Imre Deak wrote:
> Blanking/unblanking the console in a loop on an Asus T100 sometimes
> leaves the console blank. After some digging I found that applying
>
> commit 61bc95c1fbbb6a08b55bbe161fdf1ea5493fc595
> Author: Egbert Eich <eich@xxxxxxxx>
> Date: Mon Mar 4 09:24:38 2013 -0500
>
> DRM/i915: On G45 enable cursor plane briefly after enabling the display plane.
>
> fixed VLV too. At least in my case the problem seems to happen already
> during the previous crtc disabling, and it goes away if we disable SR
> watermarks before disabling the primary plane.
>
> I also noticed that the problem only happens if the C7S CPU idle state
> is entered, disabling that also gets rid of the problem. As an
> alternative I also tried to increase the plane SR watermark close to its
> maximum but that didn't solve the issue.
>
> Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
Can we please escalate this a bit with the hw guys? Duct-tape for g4x is
kinda ok, but imo for byt we should try harder ...
-Daniel
> ---
> drivers/gpu/drm/i915/i915_drv.h | 1 +
> drivers/gpu/drm/i915/intel_display.c | 9 +++++++++
> drivers/gpu/drm/i915/intel_pm.c | 7 +++++++
> 3 files changed, 17 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index bea9ab40..afee677 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -2591,6 +2591,7 @@ extern void gen6_set_rps(struct drm_device *dev, u8 val);
> extern void valleyview_set_rps(struct drm_device *dev, u8 val);
> extern int valleyview_rps_max_freq(struct drm_i915_private *dev_priv);
> extern int valleyview_rps_min_freq(struct drm_i915_private *dev_priv);
> +extern void valleyview_disable_sr_watermarks(struct drm_i915_private *dev_priv);
> extern void intel_detect_pch(struct drm_device *dev);
> extern int intel_trans_dp_port_sel(struct drm_crtc *crtc);
> extern int intel_enable_rc6(const struct drm_device *dev);
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 54095d4..11611e1 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4767,6 +4767,15 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
> if (IS_GEN2(dev))
> intel_set_cpu_fifo_underrun_reporting(dev, pipe, false);
>
> + /*
> + * Having the SR WMs enabled when disabling the primary plane may
> + * leave the primary plane in a stuck state, where it wouldn't
> + * start fetching pixels after a subsequent crtc enable.
> + * The WMs will be set to their proper values again when calling
> + * intel_update_watermarks() next.
> + */
> + if (IS_VALLEYVIEW(dev))
> + valleyview_disable_sr_watermarks(dev_priv);
> intel_crtc_disable_planes(crtc);
>
> for_each_encoder_on_crtc(dev, crtc, encoder)
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 1840d15..01962aa 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -1306,6 +1306,13 @@ static void vlv_update_drain_latency(struct drm_device *dev)
> }
> }
>
> +void valleyview_disable_sr_watermarks(struct drm_i915_private *dev_priv)
> +{
> + I915_WRITE(FW_BLC_SELF_VLV,
> + I915_READ(FW_BLC_SELF_VLV) & ~FW_CSPWRDWNEN);
> + POSTING_READ(FW_BLC_SELF_VLV);
> +}
> +
> #define single_plane_enabled(mask) is_power_of_2(mask)
>
> static void valleyview_update_wm(struct drm_crtc *crtc)
> --
> 1.8.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
