On Mon, 19 May 2014, Imre Deak <imre.deak@xxxxxxxxx> wrote:
> So far we used the wrong opcodes to access the DSI registers, so the
> register writes during DSI programming didn't actually succeed and left
> the registers unchanged. This wasn't a problem for the initial modeset,
> where the BIOS-programmed values happened to work, but after resuming
> from s0ix these registers are reset and failing to program them results
> in a blank screen.
Shobhit, this was already merged, did you have a chance to test it?
Jani.
>
> Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_sideband.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_sideband.c b/drivers/gpu/drm/i915/intel_sideband.c
> index f3909d5..01d841e 100644
> --- a/drivers/gpu/drm/i915/intel_sideband.c
> +++ b/drivers/gpu/drm/i915/intel_sideband.c
> @@ -270,13 +270,13 @@ void intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
> u32 vlv_flisdsi_read(struct drm_i915_private *dev_priv, u32 reg)
> {
> u32 val = 0;
> - vlv_sideband_rw(dev_priv, DPIO_DEVFN, IOSF_PORT_FLISDSI, SB_MRD_NP,
> + vlv_sideband_rw(dev_priv, DPIO_DEVFN, IOSF_PORT_FLISDSI, SB_CRRDDA_NP,
> reg, &val);
> return val;
> }
>
> void vlv_flisdsi_write(struct drm_i915_private *dev_priv, u32 reg, u32 val)
> {
> - vlv_sideband_rw(dev_priv, DPIO_DEVFN, IOSF_PORT_FLISDSI, SB_MWR_NP,
> + vlv_sideband_rw(dev_priv, DPIO_DEVFN, IOSF_PORT_FLISDSI, SB_CRWRDA_NP,
> reg, &val);
> }
> --
> 1.8.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
