On 04/25 20:14, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Document the internal structure of the VLV display PHY a bit to help
> people understand how the different register blocks relate to each
> other.
>
> v2: Add a bit more text
> Make it a DOC: comment, but leave the ascii art out since
> it would get mangled
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> Documentation/DocBook/drm.tmpl | 4 ++
> drivers/gpu/drm/i915/i915_reg.h | 85 +++++++++++++++++++++++++++++++++++++++--
> 2 files changed, 85 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
> index 4a955b4..e361ccd 100644
> --- a/Documentation/DocBook/drm.tmpl
> +++ b/Documentation/DocBook/drm.tmpl
> @@ -2942,6 +2942,10 @@ int num_ioctls;</synopsis>
> probing, so those sections fully apply.
> </para>
> </sect2>
> + <sect2>
> + <title>DPIO</title>
> +!Pdrivers/gpu/drm/i915/i915_reg.h DPIO
> + </sect2>
> </sect1>
>
> <sect1>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index b6d5045..8e18e8f 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -566,12 +566,89 @@ enum punit_power_well {
> #define DSI_PLL_M1_DIV_MASK (0x1ff << 0)
> #define CCK_DISPLAY_CLOCK_CONTROL 0x6b
>
> -/*
> - * DPIO - a special bus for various display related registers to hide behind
> +/**
> + * DOC: DPIO
> + *
> + * VLV and CHV have slightly peculiar display PHYs for driving DP/HDMI
> + * ports. DPIO is the name given to such a display PHY. These PHYs
> + * don't follow the standard programming model using direct MMIO
> + * registers, and instead their registers must be accessed trough IOSF
> + * sideband. VLV has one such PHY for driving ports B and C, and CHV
> + * adds another PHY for driving port D. Each PHY responds to specific
> + * IOSF-SB port.
> + *
> + * Each display PHY is made up of one or two channels. Each channel
> + * houses a common lane part which contains the PLL and other common
> + * logic. CH0 common lane also contains the IOSF-SB logic for the
> + * Common Register Interface (CRI) ie. the DPIO registers. CRI clock
> + * must be running when any DPIO registers are accessed.
> + *
> + * In addition to having their own registers, the PHYs are also
> + * controlled through some dedicated signals from the display
> + * controller. These include PLL reference clock enable, PLL enable,
> + * and CRI clock selection, for example.
> + *
> + * Eeach channel also has two splines (also called data lanes), and
> + * each spline is made up of one Physical Access Coding Sub-Layer
> + * (PCS) block and two TX lanes. So each channel has two PCS blocks
> + * and four TX lanes. The TX lanes are used as DP lanes or TMDS
> + * data/clock pairs depending on the output type.
> + *
> + * Additionally the PHY also contains an AUX lane with AUX blocks
> + * for each channel. This is used for DP AUX communication, but
> + * this fact isn't really relevant for the driver since AUX is
> + * controlled from the display controller side. No DPIO registers
> + * need to be accessed during AUX communication,
> + *
> + * Generally the common lane corresponds to the pipe and
> + * the spline (PCS/TX) correponds to the port.
> + *
> + * For dual channel PHY (VLV/CHV):
> + *
> + * pipe A == CMN/PLL/REF CH0
> *
> - * DPIO is VLV only.
> + * pipe B == CMN/PLL/REF CH1
> + *
> + * port B == PCS/TX CH0
> + *
> + * port C == PCS/TX CH1
> + *
> + * This is especially important when we cross the streams
> + * ie. drive port B with pipe B, or port C with pipe A.
> + *
Do you want to add something like the PHY actually allow PLL CH0 to supply clock
to both ports, same as PLL CH1. But this is something i915 not supported yet,
for power saving purpose.
> + * For single channel PHY (CHV):
> + *
> + * pipe C == CMN/PLL/REF CH0
> + *
> + * port D == PCS/TX CH0
> + *
> + * Note: digital port B is DDI0, digital port C is DDI1,
> + * digital port D is DDI2
> + */
> +/*
> + * Dual channel PHY (VLV/CHV)
> + * ---------------------------------
> + * | CH0 | CH1 |
> + * | CMN/PLL/REF | CMN/PLL/REF |
There is a AUX for both CH0 and CH1.
Other than this,
Reviewed-by: Chon Ming Lee <chon.ming.lee@xxxxxxxxx>
> + * |---------------|---------------| Display PHY
> + * | PCS01 | PCS23 | PCS01 | PCS23 |
> + * |-------|-------|-------|-------|
> + * |TX0|TX1|TX2|TX3|TX0|TX1|TX2|TX3|
> + * ---------------------------------
> + * | DDI0 | DDI1 | DP/HDMI ports
> + * ---------------------------------
> *
> - * Note: digital port B is DDI0, digital pot C is DDI1
> + * Single channel PHY (CHV)
> + * -----------------
> + * | CH0 |
> + * | CMN/PLL/REF |
> + * |---------------| Display PHY
> + * | PCS01 | PCS23 |
> + * |-------|-------|
> + * |TX0|TX1|TX2|TX3|
> + * -----------------
> + * | DDI2 | DP/HDMI port
> + * -----------------
> */
> #define DPIO_DEVFN 0
> #define DPIO_OPCODE_REG_WRITE 1
> --
> 1.8.3.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
