On Mon, 19 May 2014 19:23:23 +0300 ville.syrjala@xxxxxxxxxxxxxxx wrote: > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > We should be waiting for the reset bit to clear, not remain set. > > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > --- > drivers/gpu/drm/i915/intel_uncore.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c > index 0e333f2..d79db88 100644 > --- a/drivers/gpu/drm/i915/intel_uncore.c > +++ b/drivers/gpu/drm/i915/intel_uncore.c > @@ -1000,7 +1000,8 @@ static int ironlake_do_reset(struct drm_device *dev) > gdrst &= ~GRDOM_MASK; > I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR, > gdrst | GRDOM_RENDER | GRDOM_RESET_ENABLE); > - ret = wait_for(I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) & 0x1, 500); > + ret = wait_for((I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) & > + GRDOM_RESET_ENABLE) == 0, 500); > if (ret) > return ret; > > @@ -1008,7 +1009,8 @@ static int ironlake_do_reset(struct drm_device *dev) > gdrst &= ~GRDOM_MASK; > I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR, > gdrst | GRDOM_MEDIA | GRDOM_RESET_ENABLE); > - return wait_for(I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) & 0x1, 500); > + return wait_for((I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) & > + GRDOM_RESET_ENABLE) == 0, 500); > } > > static int gen6_do_reset(struct drm_device *dev) Arg, I lost the docs on this, but it matches what I remember. Reviewed-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx> -- Jesse Barnes, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx