On Tue, May 13, 2014 at 11:51:11AM -0700, clinton.a.taylor@xxxxxxxxx wrote:
> From: Clint Taylor <Clinton.A.Taylor@xxxxxxxxx>
>
> The panel power sequencer on vlv doesn't appear to accept changes to its T12 power down duration during warm reboots. This change forces a delay for warm reboots to the T12 panel timing as defined in the VBT table for the connected panel.
>
> Signed-off-by: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 43 ++++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_drv.h | 1 +
> 2 files changed, 44 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 5ca68aa9..03ac64f 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -28,6 +28,8 @@
> #include <linux/i2c.h>
> #include <linux/slab.h>
> #include <linux/export.h>
> +#include <linux/notifier.h>
> +#include <linux/reboot.h>
> #include <drm/drmP.h>
> #include <drm/drm_crtc.h>
> #include <drm/drm_crtc_helper.h>
> @@ -302,6 +304,39 @@ static u32 _pp_stat_reg(struct intel_dp *intel_dp)
> return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp));
> }
>
> +/* Reboot notifier handler to shutdown panel power to gaurantee T12 timing */
> +static int edp_notify_handler(struct notifier_block *this, unsigned long code,
> + void *unused)
> +{
> + struct intel_dp *intel_dp = container_of(this, typeof(* intel_dp),
> + edp_notifier);
> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> + struct drm_device *dev = intel_dig_port->base.base.dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + u32 pp;
> + u32 pp_ctrl_reg, pp_div_reg;
> + enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
> +
> + if (!is_edp(intel_dp))
> + return 0;
> +
> + if (IS_VALLEYVIEW(dev)) {
> + pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
> + pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
> + if (code == SYS_RESTART) {
> + pr_crit("eDP Notifier Handler\n");
> + pp = I915_READ(VLV_PIPE_PP_DIVISOR(pipe));
> + pp &= PP_REFERENCE_DIVIDER_MASK;
> + I915_WRITE(pp_div_reg , pp | 0x1F);
> + I915_WRITE(pp_ctrl_reg,
> + PANEL_UNLOCK_REGS | PANEL_POWER_OFF);
> + /* VBT entries are in tenths of uS convert to mS */
> + msleep(dev_priv->vbt.edp_pps.t11_t12 / 10);
Imo just compute the desired delay before setting up this reboot handler
and pass it as the argument.
But that leaves a bit the question why we don't need that everywhere else
and what exactly this does? I'm a bit confused with the commit message.
-Daniel
> + }
> + }
> + return 0;
> +}
> +
> static bool edp_have_panel_power(struct intel_dp *intel_dp)
> {
> struct drm_device *dev = intel_dp_to_dev(intel_dp);
> @@ -3344,6 +3379,10 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder)
> mutex_lock(&dev->mode_config.mutex);
> edp_panel_vdd_off_sync(intel_dp);
> mutex_unlock(&dev->mode_config.mutex);
> + if (intel_dp->edp_notifier.notifier_call) {
> + unregister_reboot_notifier(&intel_dp->edp_notifier);
> + intel_dp->edp_notifier.notifier_call = NULL;
> + }
> }
> kfree(intel_dig_port);
> }
> @@ -3782,6 +3821,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> if (is_edp(intel_dp)) {
> intel_dp_init_panel_power_timestamps(intel_dp);
> intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
> + if (IS_VALLEYVIEW(dev)) {
> + intel_dp->edp_notifier.notifier_call = edp_notify_handler;
> + register_reboot_notifier(&intel_dp->edp_notifier);
> + }
> }
>
> intel_dp_aux_init(intel_dp, intel_connector);
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 328b1a7..1ea193a 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -512,6 +512,7 @@ struct intel_dp {
> bool psr_setup_done;
> bool use_tps3;
> struct intel_connector *attached_connector;
> + struct notifier_block edp_notifier;
>
> uint32_t (*get_aux_clock_divider)(struct intel_dp *dp, int index);
> /*
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
