On Mon, 2014-04-21 at 13:34 +0530, deepak.s@xxxxxxxxxxxxxxx wrote:
From: Deepak S <deepak.s@xxxxxxxxxxxxxxx>
v2: Configure PCBR if BIOS fails allocate pcbr (deepak)
v3: Fix PCBR condition check during CHV RC6 Enable flag set
Signed-off-by: Deepak S <deepak.s@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_pm.c | 100 +++++++++++++++++++++++++++++++++++++++-
2 files changed, 99 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index b951d61..7090b42 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -5134,6 +5134,7 @@ enum punit_power_well {
#define GEN6_GT_GFX_RC6 0x138108
#define GEN6_GT_GFX_RC6p 0x13810C
#define GEN6_GT_GFX_RC6pp 0x138110
+#define VLV_PCBR_ADDR_SHIFT 12
#define GEN6_PCODE_MAILBOX 0x138124
#define GEN6_PCODE_READY (1<<31)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index f3c5bce..421a4cc 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3264,6 +3264,18 @@ static void gen6_disable_rps(struct drm_device *dev)
gen6_disable_rps_interrupts(dev);
}
+static void cherryview_disable_rps(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ I915_WRITE(GEN6_RC_CONTROL, 0);
+
+ if (dev_priv->vlv_pctx) {
+ drm_gem_object_unreference(&dev_priv->vlv_pctx->base);
+ dev_priv->vlv_pctx = NULL;
+ }
+}
+
static void valleyview_disable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3642,6 +3654,28 @@ static void valleyview_check_pctx(struct drm_i915_private *dev_priv)
dev_priv->vlv_pctx->stolen->start);
}
+static void cherryview_setup_pctx(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned long pctx_paddr;
+ struct i915_gtt *gtt = &dev_priv->gtt;
+ u32 pcbr;
+ int pctx_size = 32*1024;
+
+ pcbr = I915_READ(VLV_PCBR);
+ if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) {
+ /*
+ * From the Gunit register HAS:
+ * The Gfx driver is expected to program this register and ensure
+ * proper allocation within Gfx stolen memory. For example, this
+ * register should be programmed such than the PCBR range does not
+ * overlap with other relevant ranges.
+ */
+ pctx_paddr = (dev_priv->mm.stolen_base + gtt->stolen_size - pctx_size);
This area should be reserved.
+ I915_WRITE(VLV_PCBR, pctx_paddr);
+ }
+}
+
static void valleyview_setup_pctx(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3697,6 +3731,61 @@ static void valleyview_cleanup_pctx(struct drm_device *dev)
dev_priv->vlv_pctx = NULL;
}
+static void cherryview_enable_rps(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_ring_buffer *ring;
+ u32 gtfifodbg, rc6_mode = 0, pcbr;
+ int i;
+
+ WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
+
+ if ((gtfifodbg = I915_READ(GTFIFODBG))) {
+ DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n",
+ gtfifodbg);
+ I915_WRITE(GTFIFODBG, gtfifodbg);
+ }
+
+ cherryview_setup_pctx(dev);
This should be called from intel_init_gt_powersave().
+
+ /* 1a & 1b: Get forcewake during program sequence. Although the driver
+ * hasn't enabled a state yet where we need forcewake, BIOS may have.*/
+ gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
+
+ /* 2a: Program RC6 thresholds.*/
+ I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
+ I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
+ I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
+
+ for_each_ring(ring, dev_priv, i)
+ I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
+
+ I915_WRITE(GEN6_RC6_THRESHOLD, 50000); /* 50/125ms per EI */
+
+ /* allows RC6 residency counter to work */
+ I915_WRITE(VLV_COUNTER_CONTROL,
+ _MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH |
+ VLV_MEDIA_RC6_COUNT_EN |
+ VLV_RENDER_RC6_COUNT_EN));
+
+ /* Todo: If BIOS has not configured PCBR
+ * then allocate in BIOS Reserved */
+
+ /* For now we assume BIOS is allocating and populating the PCBR */
+ pcbr = I915_READ(VLV_PCBR);
+
+ DRM_DEBUG_DRIVER("PCBR offset : 0x%x\n", pcbr);
+
+ /* 3: Enable RC6 */
+ if ((intel_enable_rc6(dev) & INTEL_RC6_ENABLE) &&
+ (pcbr >> VLV_PCBR_ADDR_SHIFT))
This may break runtime PM, if PCBR isn't setup, since we assume that if
intel_enable_rc6() returns a non-zero value RC6 will be truly enabled.
So the check for PCBR should be moved to sanitize_rc6_option(). Also
note that for CHV PCBR setup cannot fail atm.
+ rc6_mode = GEN6_RC_CTL_EI_MODE(1) | VLV_RC_CTL_CTX_RST_PARALLEL;
+
+ I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
+
+ gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL);
+}
+
static void valleyview_enable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4550,7 +4639,9 @@ void intel_disable_gt_powersave(struct drm_device *dev)
cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
cancel_work_sync(&dev_priv->rps.work);
mutex_lock(&dev_priv->rps.hw_lock);
- if (IS_VALLEYVIEW(dev))
+ if (IS_CHERRYVIEW(dev))
+ cherryview_disable_rps(dev);
+ else if (IS_VALLEYVIEW(dev))
valleyview_disable_rps(dev);
else
gen6_disable_rps(dev);
@@ -4568,7 +4659,9 @@ static void intel_gen6_powersave_work(struct work_struct *work)
mutex_lock(&dev_priv->rps.hw_lock);
- if (IS_VALLEYVIEW(dev)) {
+ if (IS_CHERRYVIEW(dev)) {
+ cherryview_enable_rps(dev);
+ } else if (IS_VALLEYVIEW(dev)) {
valleyview_enable_rps(dev);
} else if (IS_BROADWELL(dev)) {
gen8_enable_rps(dev);
@@ -4590,6 +4683,8 @@ void intel_enable_gt_powersave(struct drm_device *dev)
ironlake_enable_rc6(dev);
intel_init_emon(dev);
} else if (IS_GEN6(dev) || IS_GEN7(dev)) {
+ if (IS_VALLEYVIEW(dev))
+ valleyview_setup_pctx(dev);
Spurious hunk, as Ben pointed out, and the GEN check will be false for
CherryView. The corresponding GEN check must be updated in
intel_disable_gt_powersave() too.
/*
* PCU communication is slow and this doesn't need to be
* done at any specific time, so do this out of our fast path
@@ -5175,6 +5270,7 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
dev_priv->mem_freq = 1333;
break;
}
+
DRM_DEBUG_DRIVER("DDR speed: %d MHz", dev_priv->mem_freq);
dev_priv->vlv_cdclk_freq = valleyview_cur_cdclk(dev_priv);
