Ok, review assignements. Please complain if you don't have the bandwidth so that I can find someone else. On Thu, Apr 24, 2014 at 11:54 PM, Daniel Vetter <daniel.vetter@xxxxxxxx> wrote: > > Daniel Vetter (66): > drm/i915: Make encoder->mode_set callbacks optional > drm/i915/dvo: Remove ->mode_set callback > drm/i915/tv: extract set_tv_mode_timings > drm/i915/tv: extract set_color_conversion > drm/i915/tv: De-magic device check > drm/i915/tv: Rip out pipe-disabling nonsense from ->mode_set > drm/i915/tv: Remove ->mode_set callback > drm/i915/crt: Remove ->mode_set callback > drm/i915/sdvo: Remove ->mode_set callback > > Removal of encoder->mode_set callbacks, part 1 Reviewer: Imre > drm/i915/hdmi: Enable hdmi mode on g4x, too > drm/i915: Track hdmi mode in the pipe config > drm/i915/sdvo: Use pipe_config->limited_color_range consistently > drm/i915: state readout and cross checking for limited_color_range > drm/i915/sdvo: use config->has_hdmi_sink > drm/i915: Simplify audio handling on DDI ports > drm/i915: Track has_audio in the pipe config > drm/i915/dp: Move port A pll setup to g4x_pre_enable_dp > drm/i915/dp: Remove ->mode_set callback > drm/i915/hdmi: Remove redundant IS_VLV checks > drm/i915/hdmi: Remove ->mode_set callback > > Removal of the encoder->mode_set callbacks for hdmi/sdvo/dp with small > interludes to move a bit of the hdmi/audio state into the pipe config. Reviewer: Naresh Kumar > drm/i915/lvds: Remove ->mode_set callback > drm/i915/ddi: Remove ->mode_set callback > drm/i915/dsi: Remove ->mode_set callback > drm/i915: Stop calling encoder->mode_set > > Final removals of encoder->mode_set callbacks Reviewer: Imre > drm/i915: Make ->update_primary_plane infallible > drm/i915: More cargo-culted locking for intel_update_fbc > drm/i915: Sprinkle intel_edp_psr_update over crtc_enable/disable > drm/i915: Inline set_base into crtc_mode_set > drm/i915: Move fb pinning into __intel_set_mode > > Some shuffling to get the primary->fb handling out of crtc mode_set callbacks Reviewer: Akash Goel > drm/i915: Shovel hw setup code out of i9xx_crtc_mode_set > drm/i915: Move lowfreq_avail around a bit in ilk/hsw_crtc_mode_set > drm/i915: Shovel hw setup code out of ilk_crtc_mode_set > drm/i915: Shovel hw setup code out of hsw_crtc_mode_set > drm/i915: Extract i9xx_set_pll_dividers > drm/i915: Extract vlv_prepare_pll > > gmch pll moved out of crtc mode_set callbacks into ->enable hooks Reviewer: Shobhit Kumar > drm/i915: Only update shared dpll state when needed > drm/i915: Extract intel_prepare_shared_dpll > drm/i915: s/ironlake_/intel_ for the enable_share_dpll function > > Prep polish on the existing shared_dpll code Reviewer: Damien (same comment as below) > drm/i915: Check hw state in assert_can_disable_lcpll > drm/i915: Remove spll_refcount for hsw > drm/i915: Clean up WRPLL/SPLL #defines > drm/i915: Make intel_wait_for_pipe_off static > drm/i915: Disable pipe before ports on ilk > drm/i915: Pass port explicitly to intel_ddi_get_hw_state > drm/i915: Unexport intel_ddi_connector_get_hw_state > drm/i915: Move hsw_fdi_link_train into intel_crt.c > drm/i915: Move pch fifo underrun report enabling to hsw_crt_pre_enable > drm/i915: Move the SPLL enabling into hsw_crt_pre_enable > drm/i915: Move lpt_pch_enable int hsw_crt_enable > drm/i915: Move the pch fifo underrun handling into hsw_crt_disable > drm/i915: Move lpt_disable_pch_transcoder into the hsw crt encoder > drm/i915: Move pch fifo underrun report re-enabling into > hsw_crt_post_disable > drm/i915: Move the hsw fdi disabling into hsw_crt_post_disable > drm/i915: Move SPLL disabling into hsw_crt_post_disable > > Create a new hsw-specific crt encoder which subsumes the entire fdi/pch handling > on haswell. This has the nice upshot to make SPLL logically a port-private clock > and so removes it from further considerations. Reviewer: Paulo > drm/i915: Add a debugfs file for the shared dpll state > drm/i915: Move ddi_pll_sel into the pipe config > drm/i915: State readout and cross-checking for ddi_pll_sel > drm/i915: Precompute static ddi_pll_sel values in encoders > drm/i915: Basic shared dpll support for WRPLLs > drm/i915: Document that the pll->mode_set hook is optional > drm/i915: State readout support for WRPLLs > drm/i915: ->disable hook for WRPLLs > drm/i915: ->enable hook for WRPLLs > drm/i915: Switch to common shared dpll framework for WRPLLs > drm/i915: Only touch WRPLL hw state in enable/disable hooks > > Convert wrpll handling to the common shared_dpll framework. We need this since > runtime pm for dpms requires us to separately track pll refernces from crtcs and > active usage by crtcs Reviewer: Damien (maybe find someone from the vpg guys who do the pll stuff for your project instead) > drm/i915: runtime PM support for DPMS Reviewer: Paulo/Imre -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx