The call to intel_ddi_pll_enable in haswell_crtc_mode_set is the only
function that still touches the hardware state from the crtc mode_set
callback on hsw. Since the SPLL isn't ever shared we can easily take
it out into the hsw crt encoder functions.
Temporarily we'll loose a bit of WARN_ON coverage with this, but once
the WRPLLs are switched over that will be restored. For the SPLL
selection add a WARN in the hsw fdi link training code.
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
---
drivers/gpu/drm/i915/intel_crt.c | 8 ++++++++
drivers/gpu/drm/i915/intel_ddi.c | 18 ------------------
2 files changed, 8 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index d3cae57d942a..ec806e432545 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -187,6 +187,7 @@ static void hsw_fdi_link_train(struct drm_crtc *crtc)
/* Configure Port Clock Select */
I915_WRITE(PORT_CLK_SEL(PORT_E), intel_crtc->ddi_pll_sel);
+ WARN_ON(intel_crtc->ddi_pll_sel != PORT_CLK_SEL_SPLL);
/* Start the training iterating through available voltages and emphasis,
* testing each value twice. */
@@ -276,6 +277,13 @@ static void hsw_fdi_link_train(struct drm_crtc *crtc)
static void hsw_crt_pre_enable(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL already enabled\n");
+ I915_WRITE(SPLL_CTL,
+ SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC);
+ POSTING_READ(SPLL_CTL);
+ udelay(20);
intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true);
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 13abde3e848f..4fde38a253f0 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -718,23 +718,6 @@ void intel_ddi_pll_enable(struct intel_crtc *crtc)
BUILD_BUG_ON(enable_bit != WRPLL_PLL_ENABLE);
switch (crtc->ddi_pll_sel) {
- case PORT_CLK_SEL_LCPLL_2700:
- case PORT_CLK_SEL_LCPLL_1350:
- case PORT_CLK_SEL_LCPLL_810:
- /*
- * LCPLL should always be enabled at this point of the mode set
- * sequence, so nothing to do.
- */
- return;
-
- case PORT_CLK_SEL_SPLL:
- new_val = SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz |
- SPLL_PLL_SSC;
- WARN(I915_READ(SPLL_CTL) & enable_bit, "SPLL already enabled\n");
- I915_WRITE(SPLL_CTL, new_val);
- POSTING_READ(SPLL_CTL);
- udelay(20);
- return;
case PORT_CLK_SEL_WRPLL1:
case PORT_CLK_SEL_WRPLL2:
if (crtc->ddi_pll_sel == PORT_CLK_SEL_WRPLL1) {
@@ -759,7 +742,6 @@ void intel_ddi_pll_enable(struct intel_crtc *crtc)
WARN(1, "Bad selected pll: PORT_CLK_SEL_NONE\n");
return;
default:
- WARN(1, "Bad selected pll: 0x%08x\n", crtc->ddi_pll_sel);
return;
}
--
1.8.1.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
