On Fri, Apr 11, 2014 at 10:35:40AM -0700, Jesse Barnes wrote: > On Fri, 11 Apr 2014 20:26:24 +0300 > Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> wrote: > > > On Fri, Apr 11, 2014 at 10:00:16AM -0700, Jesse Barnes wrote: > > > This is a bit like the CMN reset de-assert we do in DPIO_CTL, except > > > that it resets the whole common lane section of the PHY. This is > > > required on machines where the BIOS doesn't do this for us on resume to > > > properly re-calibrate and get the PHY ready to transmit data. > > > > > > Without this patch, such machines won't resume correctly much of the time, > > > with the symptom being a 'port ready' timeout and/or a link training > > > failure. > > > > > > I'm open to better suggestions on how to do the power well toggle, with > > > the existing code it looks like I'd have to walk through a bunch of > > > power domains looking for a match, then call a generic function which > > > will warn. I'd prefer to just expose the specific domains directly for > > > low level platform code like this. > > > > > > Signed-off-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx> > > > --- > > > drivers/gpu/drm/i915/intel_pm.c | 4 ++-- > > > drivers/gpu/drm/i915/intel_uncore.c | 19 +++++++++++++++++++ > > > 2 files changed, 21 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c > > > index fa00185..3afd0bc 100644 > > > --- a/drivers/gpu/drm/i915/intel_pm.c > > > +++ b/drivers/gpu/drm/i915/intel_pm.c > > > @@ -5454,8 +5454,8 @@ static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv, > > > return true; > > > } > > > > > > -static void vlv_set_power_well(struct drm_i915_private *dev_priv, > > > - struct i915_power_well *power_well, bool enable) > > > +void vlv_set_power_well(struct drm_i915_private *dev_priv, > > > + struct i915_power_well *power_well, bool enable) > > > { > > > enum punit_power_well power_well_id = power_well->data; > > > u32 mask; > > > diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c > > > index 2a72bab..f1abd2d 100644 > > > --- a/drivers/gpu/drm/i915/intel_uncore.c > > > +++ b/drivers/gpu/drm/i915/intel_uncore.c > > > @@ -363,6 +363,9 @@ static void intel_uncore_forcewake_reset(struct drm_device *dev, bool restore) > > > spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); > > > } > > > > > > +void vlv_set_power_well(struct drm_i915_private *dev_priv, > > > + struct i915_power_well *power_well, bool enable); > > > + > > > void intel_uncore_early_sanitize(struct drm_device *dev) > > > { > > > struct drm_i915_private *dev_priv = dev->dev_private; > > > @@ -381,6 +384,22 @@ void intel_uncore_early_sanitize(struct drm_device *dev) > > > DRM_INFO("Found %zuMB of eLLC\n", dev_priv->ellc_size); > > > } > > > > > > + /* > > > + * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx: > > > + * Need to assert and de-assert PHY SB reset by gating the common > > > + * lane power, then un-gating it. > > > + * Simply ungating isn't enough to reset the PHY enough to get > > > + * ports and lanes running. > > > + */ > > > + if (IS_VALLEYVIEW(dev)) { > > > + struct i915_power_well cmn_well = { > > > + .data = PUNIT_POWER_WELL_DPIO_CMN_BC > > > + }; > > > + > > > + vlv_set_power_well(dev_priv, &cmn_well, false); > > > + vlv_set_power_well(dev_priv, &cmn_well, true); > > > + } > > > > Stick this into intel_reset_dpio() instead? > > > > And what about fastboot and whatnot? Should we check if the display is > > already up and running somehow before we go and kill it with this? > > reset_dpio is too late. How come? We shouldn't touch the PHY before it. So either reset_dpio is in the wrong place for some reason, or something else gets called too soon. -- Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/intel-gfx