Re: [PATCH 27/71] drm/i915/chv: Enable Render Standby (RC6) for Cheeryview

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 09 Apr 2014, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> From: Deepak S <deepak.s@xxxxxxxxx>
>
> v2: Configure PCBR if BIOS fails allocate pcbr (deepak)
>
> Signed-off-by: Deepak S <deepak.s@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/intel_pm.c | 101 ++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 98 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 0889af7..909cc0a 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3184,6 +3184,18 @@ static void gen6_disable_rps(struct drm_device *dev)
>  	gen6_disable_rps_interrupts(dev);
>  }
>  
> +static void cherryview_disable_rps(struct drm_device *dev)
> +{
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +
> +	I915_WRITE(GEN6_RC_CONTROL, 0);
> +
> +	if (dev_priv->vlv_pctx) {
> +		drm_gem_object_unreference(&dev_priv->vlv_pctx->base);
> +		dev_priv->vlv_pctx = NULL;
> +	}
> +}
> +
>  static void valleyview_disable_rps(struct drm_device *dev)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -3551,6 +3563,29 @@ int valleyview_rps_min_freq(struct drm_i915_private *dev_priv)
>  	return vlv_punit_read(dev_priv, PUNIT_REG_GPU_LFM) & 0xff;
>  }
>  
> +static void cherryview_setup_pctx(struct drm_device *dev)
> +{
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	unsigned long pctx_paddr;
> +	struct i915_gtt *gtt = &dev_priv->gtt;
> +	u32 pcbr;
> +	int pctx_size = 32*1024;
> +
> +	pcbr = I915_READ(VLV_PCBR);
> +	if (pcbr >> 12 == 0) {
> +		/*
> +		 * From the Gunit register HAS:
> +		 * The Gfx driver is expected to program this register and ensure
> +		 * proper allocation within Gfx stolen memory.  For example, this
> +		 * register should be programmed such than the PCBR range does not
> +		 * overlap with other relevant ranges.
> +		 */
> +		pctx_paddr = (dev_priv->mm.stolen_base + gtt->stolen_size - pctx_size);
> +		I915_WRITE(VLV_PCBR, pctx_paddr);
> +	}
> +}
> +
> +
>  static void valleyview_setup_pctx(struct drm_device *dev)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -3595,6 +3630,61 @@ out:
>  	dev_priv->vlv_pctx = pctx;
>  }
>  
> +static void cherryview_enable_rps(struct drm_device *dev)
> +{
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_ring_buffer *ring;
> +	u32 gtfifodbg, rc6_mode = 0, pcbr;
> +	int i;
> +
> +	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
> +
> +	if ((gtfifodbg = I915_READ(GTFIFODBG))) {

Please no assignment within if; this one's easy to split.

There's a bunch of other checkpatch issues in the series; I don't
personally care about most of them but you might want to run it and see
if you want to do something about it.

BR,
Jani.


> +		DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n",
> +				 gtfifodbg);
> +		I915_WRITE(GTFIFODBG, gtfifodbg);
> +	}
> +
> +	cherryview_setup_pctx(dev);
> +
> +	/* 1a & 1b: Get forcewake during program sequence. Although the driver
> +	 * hasn't enabled a state yet where we need forcewake, BIOS may have.*/
> +	gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
> +
> +	/* 2a: Program RC6 thresholds.*/
> +	I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
> +	I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
> +	I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
> +
> +	for_each_ring(ring, dev_priv, i)
> +		I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
> +
> +	I915_WRITE(GEN6_RC6_THRESHOLD, 50000); /* 50/125ms per EI */
> +
> +	/* allows RC6 residency counter to work */
> +	I915_WRITE(VLV_COUNTER_CONTROL,
> +		   _MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH |
> +				      VLV_MEDIA_RC6_COUNT_EN |
> +				      VLV_RENDER_RC6_COUNT_EN));
> +
> +	/* Todo: If BIOS has not configured PCBR
> +	 *       then allocate in BIOS Reserved */
> +
> +	/* For now we assume BIOS is allocating and populating the PCBR  */
> +	pcbr = I915_READ(VLV_PCBR);
> +
> +	DRM_DEBUG_DRIVER("PCBR offset : 0x%x\n", pcbr);
> +
> +	/* 3: Enable RC6 */
> +	if (intel_enable_rc6(dev) & INTEL_RC6_ENABLE & (pcbr >> 12))
> +		rc6_mode = GEN6_RC_CTL_EI_MODE(1) | VLV_RC_CTL_CTX_RST_PARALLEL;
> +
> +	I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
> +
> +	gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL);
> +}
> +
> +
>  static void valleyview_enable_rps(struct drm_device *dev)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -4437,7 +4527,9 @@ void intel_disable_gt_powersave(struct drm_device *dev)
>  		cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
>  		cancel_work_sync(&dev_priv->rps.work);
>  		mutex_lock(&dev_priv->rps.hw_lock);
> -		if (IS_VALLEYVIEW(dev))
> +		if (IS_CHERRYVIEW(dev))
> +			cherryview_disable_rps(dev);
> +		else if (IS_VALLEYVIEW(dev))
>  			valleyview_disable_rps(dev);
>  		else
>  			gen6_disable_rps(dev);
> @@ -4455,7 +4547,9 @@ static void intel_gen6_powersave_work(struct work_struct *work)
>  
>  	mutex_lock(&dev_priv->rps.hw_lock);
>  
> -	if (IS_VALLEYVIEW(dev)) {
> +	if (IS_CHERRYVIEW(dev)) {
> +		cherryview_enable_rps(dev);
> +	} else if (IS_VALLEYVIEW(dev)) {
>  		valleyview_enable_rps(dev);
>  	} else if (IS_BROADWELL(dev)) {
>  		gen8_enable_rps(dev);
> @@ -4476,7 +4570,7 @@ void intel_enable_gt_powersave(struct drm_device *dev)
>  		ironlake_enable_drps(dev);
>  		ironlake_enable_rc6(dev);
>  		intel_init_emon(dev);
> -	} else if (IS_GEN6(dev) || IS_GEN7(dev)) {
> +	} else if (INTEL_INFO(dev)->gen >= 6) {
>  		if (IS_VALLEYVIEW(dev))
>  			valleyview_setup_pctx(dev);
>  		/*
> @@ -5051,6 +5145,7 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
>  		dev_priv->mem_freq = 1333;
>  		break;
>  	}
> +
>  	DRM_DEBUG_DRIVER("DDR speed: %d MHz", dev_priv->mem_freq);
>  
>  	dev_priv->vlv_cdclk_freq = valleyview_cur_cdclk(dev_priv);
> -- 
> 1.8.3.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux