On Mon, Apr 07, 2014 at 09:54:50AM -0300, Paulo Zanoni wrote:
> 2014-04-05 15:51 GMT-03:00 Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>:
> > Needs to happen after clock is running or it doesn't behave correctly.
> >
> > v2: fix subject (Ville)
> > make it clearer that this occurs in pre_enable (Paulo)
> > misc bikesheds (Paulo)
> >
> > Signed-off-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
>
> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
All 4 patches merged to dinq, thanks.
-Daniel
>
> > ---
> > drivers/gpu/drm/i915/intel_hdmi.c | 18 ++++++++++++++++--
> > 1 file changed, 16 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> > index fb9839b..fd940a7 100644
> > --- a/drivers/gpu/drm/i915/intel_hdmi.c
> > +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> > @@ -669,8 +669,6 @@ static void intel_hdmi_mode_set(struct intel_encoder *encoder)
> >
> > I915_WRITE(intel_hdmi->hdmi_reg, hdmi_val);
> > POSTING_READ(intel_hdmi->hdmi_reg);
> > -
> > - intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
> > }
> >
> > static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
> > @@ -1115,13 +1113,26 @@ done:
> > return 0;
> > }
> >
> > +static void intel_hdmi_pre_enable(struct intel_encoder *encoder)
> > +{
> > + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
> > + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> > + struct drm_display_mode *adjusted_mode =
> > + &intel_crtc->config.adjusted_mode;
> > +
> > + intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
> > +}
> > +
> > static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
> > {
> > struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
> > + struct intel_hdmi *intel_hdmi = &dport->hdmi;
> > struct drm_device *dev = encoder->base.dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > struct intel_crtc *intel_crtc =
> > to_intel_crtc(encoder->base.crtc);
> > + struct drm_display_mode *adjusted_mode =
> > + &intel_crtc->config.adjusted_mode;
> > enum dpio_channel port = vlv_dport_to_channel(dport);
> > int pipe = intel_crtc->pipe;
> > u32 val;
> > @@ -1155,6 +1166,8 @@ static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
> > vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888);
> > mutex_unlock(&dev_priv->dpio_lock);
> >
> > + intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
> > +
> > intel_enable_hdmi(encoder);
> >
> > vlv_wait_port_ready(dev_priv, dport);
> > @@ -1350,6 +1363,7 @@ void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port)
> > intel_encoder->enable = vlv_enable_hdmi;
> > intel_encoder->post_disable = vlv_hdmi_post_disable;
> > } else {
> > + intel_encoder->pre_enable = intel_hdmi_pre_enable;
> > intel_encoder->enable = intel_enable_hdmi;
> > }
> >
> > --
> > 1.7.9.5
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>
>
> --
> Paulo Zanoni
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
