I would prefer an else instead of unecessary comparisons and
assignment that will be override..
But anyway it works, so feel free to use:
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
On Fri, Mar 14, 2014 at 11:51 AM, Jani Nikula <jani.nikula@xxxxxxxxx> wrote:
> Do a slight rearrangement of the switch to prep for follow-up.
>
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 42 ++++++++++++++++++++-------------------
> 1 file changed, 22 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 24cbf4bd36c4..71a76d00d634 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -643,6 +643,28 @@ static void
> intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
> {
> struct drm_device *dev = intel_dp_to_dev(intel_dp);
> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> + enum port port = intel_dig_port->port;
> +
> + switch (port) {
> + case PORT_A:
> + intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL;
> + break;
> + case PORT_B:
> + intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL;
> + break;
> + case PORT_C:
> + intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL;
> + break;
> + case PORT_D:
> + intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL;
> + break;
> + default:
> + BUG();
> + }
> +
> + if (!HAS_DDI(dev))
> + intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
>
> intel_dp->aux.dev = dev->dev;
> intel_dp->aux.transfer = intel_dp_aux_transfer;
> @@ -3849,26 +3871,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> intel_connector->get_hw_state = intel_connector_get_hw_state;
> intel_connector->unregister = intel_dp_connector_unregister;
>
> - intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
> - if (HAS_DDI(dev)) {
> - switch (intel_dig_port->port) {
> - case PORT_A:
> - intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL;
> - break;
> - case PORT_B:
> - intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL;
> - break;
> - case PORT_C:
> - intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL;
> - break;
> - case PORT_D:
> - intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL;
> - break;
> - default:
> - BUG();
> - }
> - }
> -
> /* Set up the DDC bus. */
> switch (port) {
> case PORT_A:
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Rodrigo Vivi
Blog: http://blog.vivi.eng.br
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
