The functionality remains largerly the same. The main difference is that
i2c-over-aux defer timeouts are increased to be safe for all use cases
instead of depending on DP device type and properties.
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 197 ++++++--------------------------------
drivers/gpu/drm/i915/intel_drv.h | 2 -
2 files changed, 30 insertions(+), 169 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 71a76d00d634..208fdf075140 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -645,19 +645,25 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
enum port port = intel_dig_port->port;
+ const char *name = NULL;
+ int ret;
switch (port) {
case PORT_A:
intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL;
+ name = "DPDDC-A";
break;
case PORT_B:
intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL;
+ name = "DPDDC-B";
break;
case PORT_C:
intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL;
+ name = "DPDDC-C";
break;
case PORT_D:
intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL;
+ name = "DPDDC-D";
break;
default:
BUG();
@@ -666,128 +672,27 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
if (!HAS_DDI(dev))
intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
+ intel_dp->aux.name = name;
intel_dp->aux.dev = dev->dev;
intel_dp->aux.transfer = intel_dp_aux_transfer;
-}
-static int
-intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
- uint8_t write_byte, uint8_t *read_byte)
-{
- struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
- struct intel_dp *intel_dp = container_of(adapter,
- struct intel_dp,
- adapter);
- uint16_t address = algo_data->address;
- uint8_t msg[5];
- uint8_t reply[2];
- unsigned retry;
- int msg_bytes;
- int reply_bytes;
- int ret;
-
- /* Set up the command byte */
- if (mode & MODE_I2C_READ)
- msg[0] = DP_AUX_I2C_READ << 4;
- else
- msg[0] = DP_AUX_I2C_WRITE << 4;
+ DRM_DEBUG_KMS("registering %s bus for %s\n", name,
+ connector->base.kdev->kobj.name);
- if (!(mode & MODE_I2C_STOP))
- msg[0] |= DP_AUX_I2C_MOT << 4;
-
- msg[1] = address >> 8;
- msg[2] = address;
-
- switch (mode) {
- case MODE_I2C_WRITE:
- msg[3] = 0;
- msg[4] = write_byte;
- msg_bytes = 5;
- reply_bytes = 1;
- break;
- case MODE_I2C_READ:
- msg[3] = 0;
- msg_bytes = 4;
- reply_bytes = 2;
- break;
- default:
- msg_bytes = 3;
- reply_bytes = 1;
- break;
+ ret = drm_dp_aux_register_i2c_bus(&intel_dp->aux);
+ if (ret < 0) {
+ DRM_ERROR("drm_dp_aux_register_i2c_bus() for %s failed (%d)\n",
+ name, ret);
+ return;
}
- /*
- * DP1.2 sections 2.7.7.1.5.6.1 and 2.7.7.1.6.6.1: A DP Source device is
- * required to retry at least seven times upon receiving AUX_DEFER
- * before giving up the AUX transaction.
- */
- for (retry = 0; retry < 7; retry++) {
- ret = intel_dp_aux_ch(intel_dp,
- msg, msg_bytes,
- reply, reply_bytes);
- if (ret < 0) {
- DRM_DEBUG_KMS("aux_ch failed %d\n", ret);
- goto out;
- }
-
- switch ((reply[0] >> 4) & DP_AUX_NATIVE_REPLY_MASK) {
- case DP_AUX_NATIVE_REPLY_ACK:
- /* I2C-over-AUX Reply field is only valid
- * when paired with AUX ACK.
- */
- break;
- case DP_AUX_NATIVE_REPLY_NACK:
- DRM_DEBUG_KMS("aux_ch native nack\n");
- ret = -EREMOTEIO;
- goto out;
- case DP_AUX_NATIVE_REPLY_DEFER:
- /*
- * For now, just give more slack to branch devices. We
- * could check the DPCD for I2C bit rate capabilities,
- * and if available, adjust the interval. We could also
- * be more careful with DP-to-Legacy adapters where a
- * long legacy cable may force very low I2C bit rates.
- */
- if (intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
- DP_DWN_STRM_PORT_PRESENT)
- usleep_range(500, 600);
- else
- usleep_range(300, 400);
- continue;
- default:
- DRM_ERROR("aux_ch invalid native reply 0x%02x\n",
- reply[0]);
- ret = -EREMOTEIO;
- goto out;
- }
-
- switch ((reply[0] >> 4) & DP_AUX_I2C_REPLY_MASK) {
- case DP_AUX_I2C_REPLY_ACK:
- if (mode == MODE_I2C_READ) {
- *read_byte = reply[1];
- }
- ret = reply_bytes - 1;
- goto out;
- case DP_AUX_I2C_REPLY_NACK:
- DRM_DEBUG_KMS("aux_i2c nack\n");
- ret = -EREMOTEIO;
- goto out;
- case DP_AUX_I2C_REPLY_DEFER:
- DRM_DEBUG_KMS("aux_i2c defer\n");
- udelay(100);
- break;
- default:
- DRM_ERROR("aux_i2c invalid reply 0x%02x\n", reply[0]);
- ret = -EREMOTEIO;
- goto out;
- }
+ ret = sysfs_create_link(&connector->base.kdev->kobj,
+ &intel_dp->aux.ddc.dev.kobj,
+ intel_dp->aux.ddc.dev.kobj.name);
+ if (ret < 0) {
+ DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name, ret);
+ drm_dp_aux_unregister_i2c_bus(&intel_dp->aux);
}
-
- DRM_ERROR("too many retries, giving up\n");
- ret = -EREMOTEIO;
-
-out:
- return ret;
}
static void
@@ -796,43 +701,10 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector)
struct intel_dp *intel_dp = intel_attached_dp(&intel_connector->base);
sysfs_remove_link(&intel_connector->base.kdev->kobj,
- intel_dp->adapter.dev.kobj.name);
+ intel_dp->aux.ddc.dev.kobj.name);
intel_connector_unregister(intel_connector);
}
-static int
-intel_dp_i2c_init(struct intel_dp *intel_dp,
- struct intel_connector *intel_connector, const char *name)
-{
- int ret;
-
- DRM_DEBUG_KMS("i2c_init %s\n", name);
- intel_dp->algo.running = false;
- intel_dp->algo.address = 0;
- intel_dp->algo.aux_ch = intel_dp_i2c_aux_ch;
-
- memset(&intel_dp->adapter, '\0', sizeof(intel_dp->adapter));
- intel_dp->adapter.owner = THIS_MODULE;
- intel_dp->adapter.class = I2C_CLASS_DDC;
- strncpy(intel_dp->adapter.name, name, sizeof(intel_dp->adapter.name) - 1);
- intel_dp->adapter.name[sizeof(intel_dp->adapter.name) - 1] = '\0';
- intel_dp->adapter.algo_data = &intel_dp->algo;
- intel_dp->adapter.dev.parent = intel_connector->base.dev->dev;
-
- ret = i2c_dp_aux_add_bus(&intel_dp->adapter);
- if (ret < 0)
- return ret;
-
- ret = sysfs_create_link(&intel_connector->base.kdev->kobj,
- &intel_dp->adapter.dev.kobj,
- intel_dp->adapter.dev.kobj.name);
-
- if (ret < 0)
- i2c_del_adapter(&intel_dp->adapter);
-
- return ret;
-}
-
static void
intel_dp_set_clock(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config, int link_bw)
@@ -3098,7 +2970,7 @@ intel_dp_detect_dpcd(struct intel_dp *intel_dp)
}
/* If no HPD, poke DDC gently */
- if (drm_probe_ddc(&intel_dp->adapter))
+ if (drm_probe_ddc(&intel_dp->aux.ddc))
return connector_status_connected;
/* Well we tried, say unknown for unreliable port types */
@@ -3266,7 +3138,7 @@ intel_dp_detect(struct drm_connector *connector, bool force)
if (intel_dp->force_audio != HDMI_AUDIO_AUTO) {
intel_dp->has_audio = (intel_dp->force_audio == HDMI_AUDIO_ON);
} else {
- edid = intel_dp_get_edid(connector, &intel_dp->adapter);
+ edid = intel_dp_get_edid(connector, &intel_dp->aux.ddc);
if (edid) {
intel_dp->has_audio = drm_detect_monitor_audio(edid);
kfree(edid);
@@ -3302,7 +3174,7 @@ static int intel_dp_get_modes(struct drm_connector *connector)
power_domain = intel_display_port_power_domain(intel_encoder);
intel_display_power_get(dev_priv, power_domain);
- ret = intel_dp_get_edid_modes(connector, &intel_dp->adapter);
+ ret = intel_dp_get_edid_modes(connector, &intel_dp->aux.ddc);
intel_display_power_put(dev_priv, power_domain);
if (ret)
return ret;
@@ -3335,7 +3207,7 @@ intel_dp_detect_audio(struct drm_connector *connector)
power_domain = intel_display_port_power_domain(intel_encoder);
intel_display_power_get(dev_priv, power_domain);
- edid = intel_dp_get_edid(connector, &intel_dp->adapter);
+ edid = intel_dp_get_edid(connector, &intel_dp->aux.ddc);
if (edid) {
has_audio = drm_detect_monitor_audio(edid);
kfree(edid);
@@ -3457,7 +3329,7 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder)
struct intel_dp *intel_dp = &intel_dig_port->dp;
struct drm_device *dev = intel_dp_to_dev(intel_dp);
- i2c_del_adapter(&intel_dp->adapter);
+ drm_dp_aux_unregister_i2c_bus(&intel_dp->aux);
drm_encoder_cleanup(encoder);
if (is_edp(intel_dp)) {
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
@@ -3769,7 +3641,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
/* We now know it's not a ghost, init power sequence regs. */
intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, power_seq);
- edid = drm_get_edid(connector, &intel_dp->adapter);
+ edid = drm_get_edid(connector, &intel_dp->aux.ddc);
if (edid) {
if (drm_add_edid_modes(connector, edid)) {
drm_mode_connector_update_edid_property(connector,
@@ -3817,8 +3689,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
struct drm_i915_private *dev_priv = dev->dev_private;
enum port port = intel_dig_port->port;
struct edp_power_seq power_seq = { 0 };
- const char *name = NULL;
- int type, error;
+ int type;
/* intel_dp vfuncs */
if (IS_VALLEYVIEW(dev))
@@ -3871,23 +3742,19 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
intel_connector->get_hw_state = intel_connector_get_hw_state;
intel_connector->unregister = intel_dp_connector_unregister;
- /* Set up the DDC bus. */
+ /* Set up the hotplug pin. */
switch (port) {
case PORT_A:
intel_encoder->hpd_pin = HPD_PORT_A;
- name = "DPDDC-A";
break;
case PORT_B:
intel_encoder->hpd_pin = HPD_PORT_B;
- name = "DPDDC-B";
break;
case PORT_C:
intel_encoder->hpd_pin = HPD_PORT_C;
- name = "DPDDC-C";
break;
case PORT_D:
intel_encoder->hpd_pin = HPD_PORT_D;
- name = "DPDDC-D";
break;
default:
BUG();
@@ -3900,14 +3767,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
intel_dp_aux_init(intel_dp, intel_connector);
- error = intel_dp_i2c_init(intel_dp, intel_connector, name);
- WARN(error, "intel_dp_i2c_init failed with error %d for port %c\n",
- error, port_name(port));
-
intel_dp->psr_setup_done = false;
if (!intel_edp_init_connector(intel_dp, intel_connector, &power_seq)) {
- i2c_del_adapter(&intel_dp->adapter);
+ drm_dp_aux_unregister_i2c_bus(&intel_dp->aux);
if (is_edp(intel_dp)) {
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
mutex_lock(&dev->mode_config.mutex);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 561af4b013b1..604d57e5e4c8 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -489,8 +489,6 @@ struct intel_dp {
uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
- struct i2c_adapter adapter;
- struct i2c_algo_dp_aux_data algo;
struct drm_dp_aux aux;
uint8_t train_set[4];
int panel_power_up_delay;
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
