Create a primary plane at CRTC init and hook up handlers for the various
operations that may be performed on it. The DRM core will only
advertise the primary planes to clients that set the appropriate
capability bit.
Since we're limited to the legacy plane operations at the moment
(SetPlane and such) this isn't terribly interesting yet; the plane
update handler will perform an MMIO flip of the display plane and the
disable handler will disable the CRTC. Once we migrate more of the
plane and CRTC info over to properties in preparation for atomic/nuclear
operations, primary planes will be more useful.
Cc: Intel Graphics Development <intel-gfx@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 92 ++++++++++++++++++++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9757010..d9a5cd5 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8260,6 +8260,10 @@ static void intel_crtc_destroy(struct drm_crtc *crtc)
intel_crtc_cursor_set(crtc, NULL, 0, 0, 0);
+ drm_plane_cleanup(crtc->primary_plane);
+ kfree(crtc->primary_plane);
+ crtc->primary_plane = NULL;
+
drm_crtc_cleanup(crtc);
kfree(intel_crtc);
@@ -10272,17 +10276,105 @@ static void intel_shared_dpll_init(struct drm_device *dev)
BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
}
+static int
+intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
+ struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /* setplane API takes shifted source rectangle values; unshift them */
+ src_x >>= 16;
+ src_y >>= 16;
+ src_w >>= 16;
+ src_h >>= 16;
+
+ if (fb->width < 3 || fb->height < 3 || fb->pitches[0] > 16384) {
+ DRM_DEBUG_KMS("Unsuitable framebuffer for primary plane\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Current hardware can't reposition the primary plane or scale it
+ * (although this could change in the future). This means that we
+ * don't actually need any of the destination (crtc) rectangle values,
+ * or the source rectangle width/height; only the source x/y winds up
+ * getting used for panning. Nevertheless, let's sanity check the
+ * incoming values to make sure userspace didn't think it could scale
+ * or reposition this plane.
+ */
+ if (crtc_w != crtc->mode.hdisplay || crtc_h != crtc->mode.vdisplay ||
+ crtc_x != 0 || crtc_y != 0) {
+ DRM_DEBUG_KMS("Primary plane must cover entire CRTC\n");
+ return -EINVAL;
+ }
+ if (crtc_w != src_w || crtc_h != src_h) {
+ DRM_DEBUG_KMS("Can't scale primary plane\n");
+ return -EINVAL;
+ }
+
+ intel_pipe_set_base(crtc, src_x, src_y, fb);
+ dev_priv->display.crtc_enable(crtc);
+
+ return 0;
+}
+
+static int
+intel_primary_plane_disable(struct drm_plane *plane)
+{
+ struct drm_device *dev = plane->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+
+ if (!plane->fb)
+ return 0;
+
+ if (WARN_ON(!plane->crtc || plane->crtc->primary_plane != plane))
+ return -EINVAL;
+
+ dev_priv->display.crtc_disable(plane->crtc);
+
+ return 0;
+}
+
+static void intel_primary_plane_destroy(struct drm_plane *plane)
+{
+ /*
+ * Since primary planes are never put on the mode_config plane list,
+ * this entry point should never be called. Primary plane cleanup
+ * happens during CRTC destruction.
+ */
+ BUG();
+}
+
+static const struct drm_plane_funcs intel_primary_plane_funcs = {
+ .update_plane = intel_primary_plane_setplane,
+ .disable_plane = intel_primary_plane_disable,
+ .destroy = intel_primary_plane_destroy,
+};
+
static void intel_crtc_init(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc;
+ struct drm_plane *primary_plane;
int i;
intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
if (intel_crtc == NULL)
return;
+ primary_plane = kzalloc(sizeof(*primary_plane), GFP_KERNEL);
+ if (primary_plane == NULL) {
+ kfree(intel_crtc);
+ return;
+ }
+
drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
+ drm_plane_set_primary(dev, primary_plane, &intel_crtc->base,
+ &intel_primary_plane_funcs, NULL, 0);
drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
for (i = 0; i < 256; i++) {
--
1.8.5.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
