Re: [PATCH 1/1] kms_cursor_crc/Enabling this test for variable cursor width and heights

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 24, 2014 at 09:07:05PM +0530, sagar.a.kamble@xxxxxxxxx wrote:
> From: Sagar Kamble <sagar.a.kamble@xxxxxxxxx>
> 
> Signed-off-by: Sagar Kamble <sagar.a.kamble@xxxxxxxxx>
> ---
>  tests/kms_cursor_crc.c | 51 ++++++++++++++++++++++++++++++--------------------
>  1 file changed, 31 insertions(+), 20 deletions(-)
> 
> diff --git a/tests/kms_cursor_crc.c b/tests/kms_cursor_crc.c
> index 38aa1ab..4458248 100644
> --- a/tests/kms_cursor_crc.c
> +++ b/tests/kms_cursor_crc.c
> @@ -34,6 +34,8 @@
>  #include "igt_debugfs.h"
>  #include "igt_kms.h"
>  
> +int	w = 0, h = 0;
> +
>  enum cursor_type {
>  	WHITE_VISIBLE,
>  	WHITE_INVISIBLE,
> @@ -170,7 +172,7 @@ static void test_crc(test_data_t *test_data, enum cursor_type cursor_type,
>  
>  	/* enable cursor */
>  	igt_assert(drmModeSetCursor(data->drm_fd, test_data->crtc_id,
> -				    data->fb[cursor_type].gem_handle, 64, 64) == 0);
> +				    data->fb[cursor_type].gem_handle, w, h) == 0);
>  
>  	if (onscreen) {
>  		/* cursor onscreen, crc should match, except when white visible cursor is used */
> @@ -180,32 +182,32 @@ static void test_crc(test_data_t *test_data, enum cursor_type cursor_type,
>  		do_test(test_data, left, right, top, bottom);
>  
>  		/* 2 pixels inside */
> -		do_test(test_data, left - 62, right + 62, top     , bottom     );
> -		do_test(test_data, left     , right     , top - 62, bottom + 62);
> -		do_test(test_data, left - 62, right + 62, top - 62, bottom + 62);
> +		do_test(test_data, left - (w - 2), right + (w - 2), top     , bottom     );
> +		do_test(test_data, left     , right     , top - (w - 2), bottom + (w - 2));
> +		do_test(test_data, left - (w - 2), right + (w - 2), top - (w - 2), bottom + (w - 2));
>  
>  		/* 1 pixel inside */
> -		do_test(test_data, left - 63, right + 63, top     , bottom     );
> -		do_test(test_data, left     , right     , top - 63, bottom + 63);
> -		do_test(test_data, left - 63, right + 63, top - 63, bottom + 63);
> +		do_test(test_data, left - (w - 1), right + (w - 1), top     , bottom     );
> +		do_test(test_data, left     , right     , top - (w - 1), bottom + (w - 1));
> +		do_test(test_data, left - (w - 1), right + (w - 1), top - (w - 1), bottom + (w - 1));
>  	} else {
>  		/* cursor offscreen, crc should always match */
>  		test_data->crc_must_match = true;
>  
>  		/* fully outside */
> -		do_test(test_data, left - 64, right + 64, top     , bottom     );
> -		do_test(test_data, left     , right     , top - 64, bottom + 64);
> -		do_test(test_data, left - 64, right + 64, top - 64, bottom + 64);
> +		do_test(test_data, left - w, right + w, top     , bottom     );
> +		do_test(test_data, left     , right     , top - w, bottom + w);
> +		do_test(test_data, left - w, right + w, top - w, bottom + w);
>  
>  		/* fully outside by 1 extra pixels */
> -		do_test(test_data, left - 65, right + 65, top     , bottom     );
> -		do_test(test_data, left     , right     , top - 65, bottom + 65);
> -		do_test(test_data, left - 65, right + 65, top - 65, bottom + 65);
> +		do_test(test_data, left - (w + 1), right + (w + 1), top     , bottom     );
> +		do_test(test_data, left     , right     , top - (w + 1), bottom + (w + 1));
> +		do_test(test_data, left - (w + 1), right + (w + 1), top - (w + 1), bottom + (w + 1));
>  
>  		/* fully outside by 2 extra pixels */
> -		do_test(test_data, left - 66, right + 66, top     , bottom     );
> -		do_test(test_data, left     , right     , top - 66, bottom + 66);
> -		do_test(test_data, left - 66, right + 66, top - 66, bottom + 66);
> +		do_test(test_data, left - (w + 2), right + (w + 2), top     , bottom     );
> +		do_test(test_data, left     , right     , top - (w + 2), bottom + (w + 2));
> +		do_test(test_data, left - (w + 2), right + (w + 2), top - (w + 2), bottom + (w + 2));
>  
>  		/* fully outside by a lot of extra pixels */
>  		do_test(test_data, left - 512, right + 512, top      , bottom      );
> @@ -251,9 +253,9 @@ static bool prepare_crtc(test_data_t *test_data, uint32_t connector_id)
>  
>  	/* x/y position where the cursor is still fully visible */
>  	test_data->left = 0;
> -	test_data->right = connector.config.default_mode.hdisplay - 64;
> +	test_data->right = connector.config.default_mode.hdisplay - w;
>  	test_data->top = 0;
> -	test_data->bottom = connector.config.default_mode.vdisplay - 64;
> +	test_data->bottom = connector.config.default_mode.vdisplay - h;
>  
>  	/* make sure cursor is disabled */
>  	igt_assert(drmModeSetCursor(data->drm_fd, test_data->crtc_id, 0, 0, 0) == 0);
> @@ -314,20 +316,29 @@ static void create_cursor_fb(data_t *data,
>  {
>  	cairo_t *cr;
>  
> -	data->fb_id[cursor_type] = kmstest_create_fb2(data->drm_fd, 64, 64,
> +	data->fb_id[cursor_type] = kmstest_create_fb2(data->drm_fd, w, h,
>  						      DRM_FORMAT_ARGB8888, false,
>  						      &data->fb[cursor_type]);
>  	igt_assert(data->fb_id[cursor_type]);
>  
>  	cr = kmstest_get_cairo_ctx(data->drm_fd,
>  				   &data->fb[cursor_type]);
> -	kmstest_paint_color_alpha(cr, 0, 0, 64, 64, r, g, b, a);
> +	kmstest_paint_color_alpha(cr, 0, 0, w, h, r, g, b, a);
>  	igt_assert(cairo_status(cr) == 0);
>  }
>  
>  igt_main
>  {
>  	data_t data = {};
> +	int	c;
> +	char	args[10];
> +
> +	printf("\nEnter Width and Height of Cursor Plane (64x64, 128x128):");
> +	scanf("%s", args);
> +	if (sscanf(args, "%dx%d", &w, &h) != 2) {
> +		printf("\nInvalid arguments");
> +		return -1;
> +	}

These tests are meant to run without user interaction, so reading from
stdin isn't something we want to be doing.

What you should do is add more subtests for the different cursors sizes.
And you should make the 128x128 and 256x256 subtests skip if the kernel
refuses the specific cursor size. By using igt_subtest_f() you can avoid
a bunch of duplicated code for iterating the subtests.

>  
>  	igt_skip_on_simulation();
>  
> -- 
> 1.8.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux