[PATCH 08/19] drm/i915: get port power domain in connector detect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The connector detect and get_mode handlers need to access the port
specific HW blocks to read the EDID etc. Get/put the port power domains
around these handlers.

Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_crt.c | 42 ++++++++++++++++++++++++++++++++--------
 drivers/gpu/drm/i915/intel_dp.c  | 16 ++++++++++++---
 drivers/gpu/drm/i915/intel_dsi.c | 13 ++++++++++++-
 3 files changed, 59 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 9864aa1..2a38429 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -630,7 +630,10 @@ static enum drm_connector_status
 intel_crt_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crt *crt = intel_attached_crt(connector);
+	struct intel_encoder *intel_encoder = &crt->base;
+	enum intel_display_power_domain power_domain;
 	enum drm_connector_status status;
 	struct intel_load_detect_pipe tmp;
 
@@ -638,6 +641,11 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 		      connector->base.id, drm_get_connector_name(connector),
 		      force);
 
+	power_domain = intel_display_port_power_domain(intel_encoder);
+	intel_display_power_get(dev_priv, power_domain);
+
+	status = connector_status_connected;
+
 	if (I915_HAS_HOTPLUG(dev)) {
 		/* We can not rely on the HPD pin always being correctly wired
 		 * up, for example many KVM do not pass it through, and so
@@ -645,23 +653,27 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 		 */
 		if (intel_crt_detect_hotplug(connector)) {
 			DRM_DEBUG_KMS("CRT detected via hotplug\n");
-			return connector_status_connected;
+			goto out;
 		} else
 			DRM_DEBUG_KMS("CRT not detected via hotplug\n");
 	}
 
 	if (intel_crt_detect_ddc(connector))
-		return connector_status_connected;
+		goto out;
 
 	/* Load detection is broken on HPD capable machines. Whoever wants a
 	 * broken monitor (without edid) to work behind a broken kvm (that fails
 	 * to have the right resistors for HP detection) needs to fix this up.
 	 * For now just bail out. */
-	if (I915_HAS_HOTPLUG(dev))
-		return connector_status_disconnected;
+	if (I915_HAS_HOTPLUG(dev)) {
+		status = connector_status_disconnected;
+		goto out;
+	}
 
-	if (!force)
-		return connector->status;
+	if (!force) {
+		status = connector->status;
+		goto out;
+	}
 
 	/* for pre-945g platforms use load detect */
 	if (intel_get_load_detect_pipe(connector, NULL, &tmp)) {
@@ -673,6 +685,9 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 	} else
 		status = connector_status_unknown;
 
+out:
+	intel_display_power_put(dev_priv, power_domain);
+
 	return status;
 }
 
@@ -686,17 +701,28 @@ static int intel_crt_get_modes(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crt *crt = intel_attached_crt(connector);
+	struct intel_encoder *intel_encoder = &crt->base;
+	enum intel_display_power_domain power_domain;
 	int ret;
 	struct i2c_adapter *i2c;
 
+	power_domain = intel_display_port_power_domain(intel_encoder);
+	intel_display_power_get(dev_priv, power_domain);
+
 	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
 	ret = intel_crt_ddc_get_modes(connector, i2c);
 	if (ret || !IS_G4X(dev))
-		return ret;
+		goto out;
 
 	/* Try to probe digital port for output in DVI-I -> VGA mode. */
 	i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
-	return intel_crt_ddc_get_modes(connector, i2c);
+	ret = intel_crt_ddc_get_modes(connector, i2c);
+
+out:
+	intel_display_power_put(dev_priv, power_domain);
+
+	return ret;
 }
 
 static int intel_crt_set_property(struct drm_connector *connector,
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index f53c95c..9c39425 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3224,9 +3224,11 @@ intel_dp_detect(struct drm_connector *connector, bool force)
 	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum drm_connector_status status;
+	enum intel_display_power_domain power_domain;
 	struct edid *edid = NULL;
 
-	intel_runtime_pm_get(dev_priv);
+	power_domain = intel_display_port_power_domain(intel_encoder);
+	intel_display_power_get(dev_priv, power_domain);
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
 		      connector->base.id, drm_get_connector_name(connector));
@@ -3256,23 +3258,31 @@ intel_dp_detect(struct drm_connector *connector, bool force)
 	if (intel_encoder->type != INTEL_OUTPUT_EDP)
 		intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
 	status = connector_status_connected;
-
 out:
-	intel_runtime_pm_put(dev_priv);
+	intel_display_power_put(dev_priv, power_domain);
+
 	return status;
 }
 
 static int intel_dp_get_modes(struct drm_connector *connector)
 {
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct intel_encoder *intel_encoder = &intel_dig_port->base;
 	struct intel_connector *intel_connector = to_intel_connector(connector);
 	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum intel_display_power_domain power_domain;
 	int ret;
 
 	/* We should parse the EDID data and find out if it has an audio sink
 	 */
 
+	power_domain = intel_display_port_power_domain(intel_encoder);
+	intel_display_power_get(dev_priv, power_domain);
+
 	ret = intel_dp_get_edid_modes(connector, &intel_dp->adapter);
+	intel_display_power_put(dev_priv, power_domain);
 	if (ret)
 		return ret;
 
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 3ee1db1..63b95bbd 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -488,8 +488,19 @@ static enum drm_connector_status
 intel_dsi_detect(struct drm_connector *connector, bool force)
 {
 	struct intel_dsi *intel_dsi = intel_attached_dsi(connector);
+	struct intel_encoder *intel_encoder = &intel_dsi->base;
+	enum intel_display_power_domain power_domain;
+	enum drm_connector_status connector_status;
+	struct drm_i915_private *dev_priv = intel_encoder->base.dev->dev_private;
+
 	DRM_DEBUG_KMS("\n");
-	return intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
+	power_domain = intel_display_port_power_domain(intel_encoder);
+
+	intel_display_power_get(dev_priv, power_domain);
+	connector_status = intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
+	intel_display_power_put(dev_priv, power_domain);
+
+	return connector_status;
 }
 
 static int intel_dsi_get_modes(struct drm_connector *connector)
-- 
1.8.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux