From: Akash Goel <akash.goel@xxxxxxxxx>
This workaround is needed on VLV for the HW context feature.
It is used after adding the mi_set_context command in ring buffer
for Hw context switch. As per the spec
"The software must send a pipe_control with a CS stall and a post sync
operation and then a dummy DRAW after every MI_SET_CONTEXT and after any
PIPELINE_SELECT that is enabling 3D mode".
v2: Modified the WA comment. (Ville)
Signed-off-by: Akash Goel <akash.goel@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_gem_context.c | 65 ++++++++++++++++++++++++++++++++-
drivers/gpu/drm/i915/i915_reg.h | 3 ++
drivers/gpu/drm/i915/intel_ringbuffer.c | 9 +++++
drivers/gpu/drm/i915/intel_ringbuffer.h | 1 +
4 files changed, 76 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c
index 19fd362..bc2868d 100644
--- a/drivers/gpu/drm/i915/i915_gem_context.c
+++ b/drivers/gpu/drm/i915/i915_gem_context.c
@@ -541,6 +541,58 @@ i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id)
return ctx;
}
+static inline void
+mi_set_context_dummy3d_prim_wa(struct intel_ring_buffer *ring)
+{
+ u32 scratch_addr;
+ u32 flags = 0;
+
+ /*
+ * Check if we have the scratch page allocated needed
+ * for the Pipe Control command, otherwise don't apply
+ * the dummmy 3d primitive workaround & add NOOPs instead
+ */
+ if (get_pipe_control_scratch_addr(ring)) {
+ /* Actual scratch location is at 128 bytes offset */
+ scratch_addr = get_pipe_control_scratch_addr(ring) + 128;
+
+ /*
+ * WaSendDummy3dPrimitveAfterSetContext
+ * Software must send a pipe_control with a CS stall
+ * and a post sync operation and then a dummy DRAW after
+ * every MI_SET_CONTEXT and after any PIPELINE_SELECT that
+ * is enabling 3D mode. A dummy draw is a 3DPRIMITIVE command
+ * with Indirect Parameter Enable set to 0, UAV Coherency
+ * Required set to 0, Predicate Enable set to 0,
+ * End Offset Enable set to 0, and Vertex Count Per Instance
+ * set to 0, All other parameters are a don't care.
+ */
+
+ /*
+ * Add a pipe control with CS Stall and postsync op
+ * before dummy 3D_PRIMITIVE
+ */
+ flags |= PIPE_CONTROL_QW_WRITE | PIPE_CONTROL_CS_STALL;
+ intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(4));
+ intel_ring_emit(ring, flags);
+ intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT);
+ intel_ring_emit(ring, 0);
+
+ /* Add a dummy 3D_PRIMITVE */
+ intel_ring_emit(ring, GFX_OP_3DPRIMITIVE());
+ intel_ring_emit(ring, 4); /* PrimTopoType*/
+ intel_ring_emit(ring, 0); /* VertexCountPerInstance */
+ intel_ring_emit(ring, 0); /* StartVertexLocation */
+ intel_ring_emit(ring, 0); /* InstanceCount */
+ intel_ring_emit(ring, 0); /* StartInstanceLocation */
+ intel_ring_emit(ring, 0); /* BaseVertexLocation */
+ } else {
+ int i;
+ for (i = 0; i < 11; i++)
+ intel_ring_emit(ring, MI_NOOP);
+ }
+}
+
static inline int
mi_set_context(struct intel_ring_buffer *ring,
struct i915_hw_context *new_context,
@@ -559,7 +611,10 @@ mi_set_context(struct intel_ring_buffer *ring,
return ret;
}
- ret = intel_ring_begin(ring, 6);
+ if (IS_VALLEYVIEW(ring->dev))
+ ret = intel_ring_begin(ring, 6+4+8);
+ else
+ ret = intel_ring_begin(ring, 6);
if (ret)
return ret;
@@ -583,7 +638,13 @@ mi_set_context(struct intel_ring_buffer *ring,
intel_ring_emit(ring, MI_NOOP);
if (IS_GEN7(ring->dev))
- intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_ENABLE);
+ if (IS_VALLEYVIEW(ring->dev)) {
+ /* FIXME, should also apply to ivb */
+ mi_set_context_dummy3d_prim_wa(ring);
+ intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_ENABLE);
+ intel_ring_emit(ring, MI_NOOP);
+ } else
+ intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_ENABLE);
else
intel_ring_emit(ring, MI_NOOP);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f73a49d..9a1fee6 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -335,6 +335,9 @@
#define PIPE_CONTROL_DEPTH_CACHE_FLUSH (1<<0)
#define PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */
+#define GFX_OP_3DPRIMITIVE() \
+ ((0x3<<29)|(0x3<<27)|(0x3<<24)| \
+ (0x0<<16)|(0x0<<10)|(0x0<<8)|(7-2))
/*
* Reset registers
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 0d7d927b..812039a 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -556,6 +556,15 @@ err:
return ret;
}
+u32
+get_pipe_control_scratch_addr(struct intel_ring_buffer *ring)
+{
+ if (ring->scratch.obj == NULL)
+ return 0;
+
+ return ring->scratch.gtt_offset;
+}
+
static int init_render_ring(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 38c757e..6c52d59 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -259,6 +259,7 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev);
u32 intel_ring_get_active_head(struct intel_ring_buffer *ring);
void intel_ring_setup_status_page(struct intel_ring_buffer *ring);
+u32 get_pipe_control_scratch_addr(struct intel_ring_buffer *ring);
static inline u32 intel_ring_get_tail(struct intel_ring_buffer *ring)
{
--
1.8.5.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
