[PATCH 2/8] drm/i915: Make the intel_device_info structure kept in dev_priv writable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Turns out it'd be nice to change some device information at run-time or simply
have some code to fill in the info struct instead of having to declare the
values in 30+ structures.

What prompted this change is handling fused out display/pipe and tweaking
num_pipes at run-time, but I'm quite sure we'll find other flags/limits to
stick into dev_priv->info.

Most of the changes were done with a sed:
sed -i -e 's/dev_priv->info->/dev_priv->info./g' drivers/gpu/drm/i915/*[ch]

with a few tweaks to make it all work:
- Change the field definition in struct drm_i915_private
- adjust i915_dump_device_info()
- adjust i915_driver_load()
- adjust the INTEL_INFO() macro

v2: cast the info pointer returned by INTEL_INFO() to be const to catch
    uses that would modify the structure post-initialization.
    (Ville Syrjälä)

v3: Redo the patch onto latest drm-nightly,
    Keep the info field const to catch post initialization writes
    instead of the v2 solution,
    Use a direct structure copy for the initial info initialization to
    use the compiler type safety (Ville Syrjälä)

Reviewed-by: Mika Kuoppala <mika.kuoppala@xxxxxxxxx> (for v2)
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> (for v2)
Signed-off-by: Damien Lespiau <damien.lespiau@xxxxxxxxx>
---
 drivers/gpu/drm/i915/i915_dma.c |   9 ++-
 drivers/gpu/drm/i915/i915_drv.h |   4 +-
 drivers/gpu/drm/i915/i915_reg.h | 148 ++++++++++++++++++++--------------------
 3 files changed, 82 insertions(+), 79 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 258b1be..0a9d0ad 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1442,7 +1442,7 @@ static void i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
 
 static void i915_dump_device_info(struct drm_i915_private *dev_priv)
 {
-	const struct intel_device_info *info = dev_priv->info;
+	const struct intel_device_info *info = &dev_priv->info;
 
 #define PRINT_S(name) "%s"
 #define SEP_EMPTY
@@ -1473,7 +1473,7 @@ static void i915_dump_device_info(struct drm_i915_private *dev_priv)
 int i915_driver_load(struct drm_device *dev, unsigned long flags)
 {
 	struct drm_i915_private *dev_priv;
-	struct intel_device_info *info;
+	struct intel_device_info *info, *device_info;
 	int ret = 0, mmio_bar, mmio_size;
 	uint32_t aperture_size;
 
@@ -1496,7 +1496,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
 	dev->dev_private = (void *)dev_priv;
 	dev_priv->dev = dev;
-	dev_priv->info = info;
+
+	/* copy initial configuration to dev_priv->info */
+	device_info = (struct intel_device_info *)&dev_priv->info;
+	*device_info = *info;
 
 	spin_lock_init(&dev_priv->irq_lock);
 	spin_lock_init(&dev_priv->gpu_error.lock);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 728b9c3..f66699f 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1390,7 +1390,7 @@ typedef struct drm_i915_private {
 	struct drm_device *dev;
 	struct kmem_cache *slab;
 
-	const struct intel_device_info *info;
+	const struct intel_device_info info;
 
 	int relative_constants_mode;
 
@@ -1799,7 +1799,7 @@ struct drm_i915_file_private {
 	atomic_t rps_wait_boost;
 };
 
-#define INTEL_INFO(dev)	(to_i915(dev)->info)
+#define INTEL_INFO(dev)	(&to_i915(dev)->info)
 
 #define IS_I830(dev)		((dev)->pdev->device == 0x3577)
 #define IS_845G(dev)		((dev)->pdev->device == 0x2562)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index cc3ea04..29b8819 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1204,8 +1204,8 @@
  */
 #define DPLL_A_OFFSET 0x6014
 #define DPLL_B_OFFSET 0x6018
-#define DPLL(pipe) (dev_priv->info->dpll_offsets[pipe] + \
-		    dev_priv->info->display_mmio_offset)
+#define DPLL(pipe) (dev_priv->info.dpll_offsets[pipe] + \
+		    dev_priv->info.display_mmio_offset)
 
 #define VGA0	0x6000
 #define VGA1	0x6004
@@ -1282,8 +1282,8 @@
 
 #define DPLL_A_MD_OFFSET 0x601c /* 965+ only */
 #define DPLL_B_MD_OFFSET 0x6020 /* 965+ only */
-#define DPLL_MD(pipe) (dev_priv->info->dpll_md_offsets[pipe] + \
-		       dev_priv->info->display_mmio_offset)
+#define DPLL_MD(pipe) (dev_priv->info.dpll_md_offsets[pipe] + \
+		       dev_priv->info.display_mmio_offset)
 
 /*
  * UDI pixel divider, controlling how many pixels are stuffed into a packet.
@@ -1352,7 +1352,7 @@
 #define  DSTATE_PLL_D3_OFF			(1<<3)
 #define  DSTATE_GFX_CLOCK_GATING		(1<<1)
 #define  DSTATE_DOT_CLOCK_GATING		(1<<0)
-#define DSPCLK_GATE_D	(dev_priv->info->display_mmio_offset + 0x6200)
+#define DSPCLK_GATE_D	(dev_priv->info.display_mmio_offset + 0x6200)
 # define DPUNIT_B_CLOCK_GATE_DISABLE		(1 << 30) /* 965 */
 # define VSUNIT_CLOCK_GATE_DISABLE		(1 << 29) /* 965 */
 # define VRHUNIT_CLOCK_GATE_DISABLE		(1 << 28) /* 965 */
@@ -1478,8 +1478,8 @@
  */
 #define PALETTE_A_OFFSET 0xa000
 #define PALETTE_B_OFFSET 0xa800
-#define PALETTE(pipe) (dev_priv->info->palette_offsets[pipe] + \
-		       dev_priv->info->display_mmio_offset)
+#define PALETTE(pipe) (dev_priv->info.palette_offsets[pipe] + \
+		       dev_priv->info.display_mmio_offset)
 
 /* MCH MMIO space */
 
@@ -1969,9 +1969,9 @@
 #define TRANSCODER_C_OFFSET 0x62000
 #define TRANSCODER_EDP_OFFSET 0x6f000
 
-#define _TRANSCODER2(pipe, reg) (dev_priv->info->trans_offsets[(pipe)] - \
-	dev_priv->info->trans_offsets[TRANSCODER_A] + (reg) + \
-	dev_priv->info->display_mmio_offset)
+#define _TRANSCODER2(pipe, reg) (dev_priv->info.trans_offsets[(pipe)] - \
+	dev_priv->info.trans_offsets[TRANSCODER_A] + (reg) + \
+	dev_priv->info.display_mmio_offset)
 
 #define HTOTAL(trans) _TRANSCODER2(trans, _HTOTAL_A)
 #define HBLANK(trans) _TRANSCODER2(trans, _HBLANK_A)
@@ -2098,7 +2098,7 @@
 
 
 /* Hotplug control (945+ only) */
-#define PORT_HOTPLUG_EN		(dev_priv->info->display_mmio_offset + 0x61110)
+#define PORT_HOTPLUG_EN		(dev_priv->info.display_mmio_offset + 0x61110)
 #define   PORTB_HOTPLUG_INT_EN			(1 << 29)
 #define   PORTC_HOTPLUG_INT_EN			(1 << 28)
 #define   PORTD_HOTPLUG_INT_EN			(1 << 27)
@@ -2128,7 +2128,7 @@
 #define CRT_HOTPLUG_DETECT_VOLTAGE_325MV	(0 << 2)
 #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV	(1 << 2)
 
-#define PORT_HOTPLUG_STAT	(dev_priv->info->display_mmio_offset + 0x61114)
+#define PORT_HOTPLUG_STAT	(dev_priv->info.display_mmio_offset + 0x61114)
 /*
  * HDMI/DP bits are gen4+
  *
@@ -2405,7 +2405,7 @@
 #define PP_DIVISOR	0x61210
 
 /* Panel fitting */
-#define PFIT_CONTROL	(dev_priv->info->display_mmio_offset + 0x61230)
+#define PFIT_CONTROL	(dev_priv->info.display_mmio_offset + 0x61230)
 #define   PFIT_ENABLE		(1 << 31)
 #define   PFIT_PIPE_MASK	(3 << 29)
 #define   PFIT_PIPE_SHIFT	29
@@ -2423,7 +2423,7 @@
 #define   PFIT_SCALING_PROGRAMMED (1 << 26)
 #define   PFIT_SCALING_PILLAR	(2 << 26)
 #define   PFIT_SCALING_LETTER	(3 << 26)
-#define PFIT_PGM_RATIOS	(dev_priv->info->display_mmio_offset + 0x61234)
+#define PFIT_PGM_RATIOS	(dev_priv->info.display_mmio_offset + 0x61234)
 /* Pre-965 */
 #define		PFIT_VERT_SCALE_SHIFT		20
 #define		PFIT_VERT_SCALE_MASK		0xfff00000
@@ -2435,25 +2435,25 @@
 #define		PFIT_HORIZ_SCALE_SHIFT_965	0
 #define		PFIT_HORIZ_SCALE_MASK_965	0x00001fff
 
-#define PFIT_AUTO_RATIOS (dev_priv->info->display_mmio_offset + 0x61238)
+#define PFIT_AUTO_RATIOS (dev_priv->info.display_mmio_offset + 0x61238)
 
-#define _VLV_BLC_PWM_CTL2_A (dev_priv->info->display_mmio_offset + 0x61250)
-#define _VLV_BLC_PWM_CTL2_B (dev_priv->info->display_mmio_offset + 0x61350)
+#define _VLV_BLC_PWM_CTL2_A (dev_priv->info.display_mmio_offset + 0x61250)
+#define _VLV_BLC_PWM_CTL2_B (dev_priv->info.display_mmio_offset + 0x61350)
 #define VLV_BLC_PWM_CTL2(pipe) _PIPE(pipe, _VLV_BLC_PWM_CTL2_A, \
 				     _VLV_BLC_PWM_CTL2_B)
 
-#define _VLV_BLC_PWM_CTL_A (dev_priv->info->display_mmio_offset + 0x61254)
-#define _VLV_BLC_PWM_CTL_B (dev_priv->info->display_mmio_offset + 0x61354)
+#define _VLV_BLC_PWM_CTL_A (dev_priv->info.display_mmio_offset + 0x61254)
+#define _VLV_BLC_PWM_CTL_B (dev_priv->info.display_mmio_offset + 0x61354)
 #define VLV_BLC_PWM_CTL(pipe) _PIPE(pipe, _VLV_BLC_PWM_CTL_A, \
 				    _VLV_BLC_PWM_CTL_B)
 
-#define _VLV_BLC_HIST_CTL_A (dev_priv->info->display_mmio_offset + 0x61260)
-#define _VLV_BLC_HIST_CTL_B (dev_priv->info->display_mmio_offset + 0x61360)
+#define _VLV_BLC_HIST_CTL_A (dev_priv->info.display_mmio_offset + 0x61260)
+#define _VLV_BLC_HIST_CTL_B (dev_priv->info.display_mmio_offset + 0x61360)
 #define VLV_BLC_HIST_CTL(pipe) _PIPE(pipe, _VLV_BLC_HIST_CTL_A, \
 				     _VLV_BLC_HIST_CTL_B)
 
 /* Backlight control */
-#define BLC_PWM_CTL2	(dev_priv->info->display_mmio_offset + 0x61250) /* 965+ only */
+#define BLC_PWM_CTL2	(dev_priv->info.display_mmio_offset + 0x61250) /* 965+ only */
 #define   BLM_PWM_ENABLE		(1 << 31)
 #define   BLM_COMBINATION_MODE		(1 << 30) /* gen4 only */
 #define   BLM_PIPE_SELECT		(1 << 29)
@@ -2476,7 +2476,7 @@
 #define   BLM_PHASE_IN_COUNT_MASK	(0xff << 8)
 #define   BLM_PHASE_IN_INCR_SHIFT	(0)
 #define   BLM_PHASE_IN_INCR_MASK	(0xff << 0)
-#define BLC_PWM_CTL	(dev_priv->info->display_mmio_offset + 0x61254)
+#define BLC_PWM_CTL	(dev_priv->info.display_mmio_offset + 0x61254)
 /*
  * This is the most significant 15 bits of the number of backlight cycles in a
  * complete cycle of the modulated backlight control.
@@ -2498,7 +2498,7 @@
 #define   BACKLIGHT_DUTY_CYCLE_MASK_PNV		(0xfffe)
 #define   BLM_POLARITY_PNV			(1 << 0) /* pnv only */
 
-#define BLC_HIST_CTL	(dev_priv->info->display_mmio_offset + 0x61260)
+#define BLC_HIST_CTL	(dev_priv->info.display_mmio_offset + 0x61260)
 
 /* New registers for PCH-split platforms. Safe where new bits show up, the
  * register layout machtes with gen4 BLC_PWM_CTL[12]. */
@@ -3287,9 +3287,9 @@
  */
 #define PIPE_EDP_OFFSET	0x7f000
 
-#define _PIPE2(pipe, reg) (dev_priv->info->pipe_offsets[pipe] - \
-	dev_priv->info->pipe_offsets[PIPE_A] + (reg) + \
-	dev_priv->info->display_mmio_offset)
+#define _PIPE2(pipe, reg) (dev_priv->info.pipe_offsets[pipe] - \
+	dev_priv->info.pipe_offsets[PIPE_A] + (reg) + \
+	dev_priv->info.display_mmio_offset)
 
 #define PIPECONF(pipe) _PIPE2(pipe, _PIPEACONF)
 #define PIPEDSL(pipe)  _PIPE2(pipe, _PIPEADSL)
@@ -3351,7 +3351,7 @@
 #define   DSPARB_BEND_SHIFT	9 /* on 855 */
 #define   DSPARB_AEND_SHIFT	0
 
-#define DSPFW1			(dev_priv->info->display_mmio_offset + 0x70034)
+#define DSPFW1			(dev_priv->info.display_mmio_offset + 0x70034)
 #define   DSPFW_SR_SHIFT	23
 #define   DSPFW_SR_MASK		(0x1ff<<23)
 #define   DSPFW_CURSORB_SHIFT	16
@@ -3359,11 +3359,11 @@
 #define   DSPFW_PLANEB_SHIFT	8
 #define   DSPFW_PLANEB_MASK	(0x7f<<8)
 #define   DSPFW_PLANEA_MASK	(0x7f)
-#define DSPFW2			(dev_priv->info->display_mmio_offset + 0x70038)
+#define DSPFW2			(dev_priv->info.display_mmio_offset + 0x70038)
 #define   DSPFW_CURSORA_MASK	0x00003f00
 #define   DSPFW_CURSORA_SHIFT	8
 #define   DSPFW_PLANEC_MASK	(0x7f)
-#define DSPFW3			(dev_priv->info->display_mmio_offset + 0x7003c)
+#define DSPFW3			(dev_priv->info.display_mmio_offset + 0x7003c)
 #define   DSPFW_HPLL_SR_EN	(1<<31)
 #define   DSPFW_CURSOR_SR_SHIFT	24
 #define   PINEVIEW_SELF_REFRESH_EN	(1<<30)
@@ -3371,8 +3371,8 @@
 #define   DSPFW_HPLL_CURSOR_SHIFT	16
 #define   DSPFW_HPLL_CURSOR_MASK	(0x3f<<16)
 #define   DSPFW_HPLL_SR_MASK		(0x1ff)
-#define DSPFW4			(dev_priv->info->display_mmio_offset + 0x70070)
-#define DSPFW7			(dev_priv->info->display_mmio_offset + 0x7007c)
+#define DSPFW4			(dev_priv->info.display_mmio_offset + 0x70070)
+#define DSPFW7			(dev_priv->info.display_mmio_offset + 0x7007c)
 
 /* drain latency register values*/
 #define DRAIN_LATENCY_PRECISION_32	32
@@ -3496,12 +3496,12 @@
 #define   PIPE_PIXEL_MASK         0x00ffffff
 #define   PIPE_PIXEL_SHIFT        0
 /* GM45+ just has to be different */
-#define _PIPEA_FRMCOUNT_GM45	(dev_priv->info->display_mmio_offset + 0x70040)
-#define _PIPEA_FLIPCOUNT_GM45	(dev_priv->info->display_mmio_offset + 0x70044)
+#define _PIPEA_FRMCOUNT_GM45	(dev_priv->info.display_mmio_offset + 0x70040)
+#define _PIPEA_FLIPCOUNT_GM45	(dev_priv->info.display_mmio_offset + 0x70044)
 #define PIPE_FRMCOUNT_GM45(pipe) _PIPE(pipe, _PIPEA_FRMCOUNT_GM45, _PIPEB_FRMCOUNT_GM45)
 
 /* Cursor A & B regs */
-#define _CURACNTR		(dev_priv->info->display_mmio_offset + 0x70080)
+#define _CURACNTR		(dev_priv->info.display_mmio_offset + 0x70080)
 /* Old style CUR*CNTR flags (desktop 8xx) */
 #define   CURSOR_ENABLE		0x80000000
 #define   CURSOR_GAMMA_ENABLE	0x40000000
@@ -3524,16 +3524,16 @@
 #define   MCURSOR_PIPE_B	(1 << 28)
 #define   MCURSOR_GAMMA_ENABLE  (1 << 26)
 #define   CURSOR_TRICKLE_FEED_DISABLE	(1 << 14)
-#define _CURABASE		(dev_priv->info->display_mmio_offset + 0x70084)
-#define _CURAPOS		(dev_priv->info->display_mmio_offset + 0x70088)
+#define _CURABASE		(dev_priv->info.display_mmio_offset + 0x70084)
+#define _CURAPOS		(dev_priv->info.display_mmio_offset + 0x70088)
 #define   CURSOR_POS_MASK       0x007FF
 #define   CURSOR_POS_SIGN       0x8000
 #define   CURSOR_X_SHIFT        0
 #define   CURSOR_Y_SHIFT        16
 #define CURSIZE			0x700a0
-#define _CURBCNTR		(dev_priv->info->display_mmio_offset + 0x700c0)
-#define _CURBBASE		(dev_priv->info->display_mmio_offset + 0x700c4)
-#define _CURBPOS		(dev_priv->info->display_mmio_offset + 0x700c8)
+#define _CURBCNTR		(dev_priv->info.display_mmio_offset + 0x700c0)
+#define _CURBBASE		(dev_priv->info.display_mmio_offset + 0x700c4)
+#define _CURBPOS		(dev_priv->info.display_mmio_offset + 0x700c8)
 
 #define _CURBCNTR_IVB		0x71080
 #define _CURBBASE_IVB		0x71084
@@ -3608,44 +3608,44 @@
 #define I915_HI_DISPBASE(val)	(val & DISP_BASEADDR_MASK)
 
 /* VBIOS flags */
-#define SWF00			(dev_priv->info->display_mmio_offset + 0x71410)
-#define SWF01			(dev_priv->info->display_mmio_offset + 0x71414)
-#define SWF02			(dev_priv->info->display_mmio_offset + 0x71418)
-#define SWF03			(dev_priv->info->display_mmio_offset + 0x7141c)
-#define SWF04			(dev_priv->info->display_mmio_offset + 0x71420)
-#define SWF05			(dev_priv->info->display_mmio_offset + 0x71424)
-#define SWF06			(dev_priv->info->display_mmio_offset + 0x71428)
-#define SWF10			(dev_priv->info->display_mmio_offset + 0x70410)
-#define SWF11			(dev_priv->info->display_mmio_offset + 0x70414)
-#define SWF14			(dev_priv->info->display_mmio_offset + 0x71420)
-#define SWF30			(dev_priv->info->display_mmio_offset + 0x72414)
-#define SWF31			(dev_priv->info->display_mmio_offset + 0x72418)
-#define SWF32			(dev_priv->info->display_mmio_offset + 0x7241c)
+#define SWF00			(dev_priv->info.display_mmio_offset + 0x71410)
+#define SWF01			(dev_priv->info.display_mmio_offset + 0x71414)
+#define SWF02			(dev_priv->info.display_mmio_offset + 0x71418)
+#define SWF03			(dev_priv->info.display_mmio_offset + 0x7141c)
+#define SWF04			(dev_priv->info.display_mmio_offset + 0x71420)
+#define SWF05			(dev_priv->info.display_mmio_offset + 0x71424)
+#define SWF06			(dev_priv->info.display_mmio_offset + 0x71428)
+#define SWF10			(dev_priv->info.display_mmio_offset + 0x70410)
+#define SWF11			(dev_priv->info.display_mmio_offset + 0x70414)
+#define SWF14			(dev_priv->info.display_mmio_offset + 0x71420)
+#define SWF30			(dev_priv->info.display_mmio_offset + 0x72414)
+#define SWF31			(dev_priv->info.display_mmio_offset + 0x72418)
+#define SWF32			(dev_priv->info.display_mmio_offset + 0x7241c)
 
 /* Pipe B */
-#define _PIPEBDSL		(dev_priv->info->display_mmio_offset + 0x71000)
-#define _PIPEBCONF		(dev_priv->info->display_mmio_offset + 0x71008)
-#define _PIPEBSTAT		(dev_priv->info->display_mmio_offset + 0x71024)
+#define _PIPEBDSL		(dev_priv->info.display_mmio_offset + 0x71000)
+#define _PIPEBCONF		(dev_priv->info.display_mmio_offset + 0x71008)
+#define _PIPEBSTAT		(dev_priv->info.display_mmio_offset + 0x71024)
 #define _PIPEBFRAMEHIGH		0x71040
 #define _PIPEBFRAMEPIXEL	0x71044
-#define _PIPEB_FRMCOUNT_GM45	(dev_priv->info->display_mmio_offset + 0x71040)
-#define _PIPEB_FLIPCOUNT_GM45	(dev_priv->info->display_mmio_offset + 0x71044)
+#define _PIPEB_FRMCOUNT_GM45	(dev_priv->info.display_mmio_offset + 0x71040)
+#define _PIPEB_FLIPCOUNT_GM45	(dev_priv->info.display_mmio_offset + 0x71044)
 
 
 /* Display B control */
-#define _DSPBCNTR		(dev_priv->info->display_mmio_offset + 0x71180)
+#define _DSPBCNTR		(dev_priv->info.display_mmio_offset + 0x71180)
 #define   DISPPLANE_ALPHA_TRANS_ENABLE		(1<<15)
 #define   DISPPLANE_ALPHA_TRANS_DISABLE		0
 #define   DISPPLANE_SPRITE_ABOVE_DISPLAY	0
 #define   DISPPLANE_SPRITE_ABOVE_OVERLAY	(1)
-#define _DSPBADDR		(dev_priv->info->display_mmio_offset + 0x71184)
-#define _DSPBSTRIDE		(dev_priv->info->display_mmio_offset + 0x71188)
-#define _DSPBPOS		(dev_priv->info->display_mmio_offset + 0x7118C)
-#define _DSPBSIZE		(dev_priv->info->display_mmio_offset + 0x71190)
-#define _DSPBSURF		(dev_priv->info->display_mmio_offset + 0x7119C)
-#define _DSPBTILEOFF		(dev_priv->info->display_mmio_offset + 0x711A4)
-#define _DSPBOFFSET		(dev_priv->info->display_mmio_offset + 0x711A4)
-#define _DSPBSURFLIVE		(dev_priv->info->display_mmio_offset + 0x711AC)
+#define _DSPBADDR		(dev_priv->info.display_mmio_offset + 0x71184)
+#define _DSPBSTRIDE		(dev_priv->info.display_mmio_offset + 0x71188)
+#define _DSPBPOS		(dev_priv->info.display_mmio_offset + 0x7118C)
+#define _DSPBSIZE		(dev_priv->info.display_mmio_offset + 0x71190)
+#define _DSPBSURF		(dev_priv->info.display_mmio_offset + 0x7119C)
+#define _DSPBTILEOFF		(dev_priv->info.display_mmio_offset + 0x711A4)
+#define _DSPBOFFSET		(dev_priv->info.display_mmio_offset + 0x711A4)
+#define _DSPBSURFLIVE		(dev_priv->info.display_mmio_offset + 0x711AC)
 
 /* Sprite A control */
 #define _DVSACNTR		0x72180
@@ -5051,7 +5051,7 @@
 #define   GEN8_CENTROID_PIXEL_OPT_DIS	(1<<8)
 #define   GEN8_SAMPLER_POWER_BYPASS_DIS	(1<<1)
 
-#define G4X_AUD_VID_DID			(dev_priv->info->display_mmio_offset + 0x62020)
+#define G4X_AUD_VID_DID			(dev_priv->info.display_mmio_offset + 0x62020)
 #define INTEL_AUDIO_DEVCL		0x808629FB
 #define INTEL_AUDIO_DEVBLC		0x80862801
 #define INTEL_AUDIO_DEVCTG		0x80862802
@@ -5904,11 +5904,11 @@
 #define  READ_DATA_VALID(n)				(1 << (n))
 
 /* For UMS only (deprecated): */
-#define _PALETTE_A (dev_priv->info->display_mmio_offset + 0xa000)
-#define _PALETTE_B (dev_priv->info->display_mmio_offset + 0xa800)
-#define _DPLL_A (dev_priv->info->display_mmio_offset + 0x6014)
-#define _DPLL_B (dev_priv->info->display_mmio_offset + 0x6018)
-#define _DPLL_A_MD (dev_priv->info->display_mmio_offset + 0x601c)
-#define _DPLL_B_MD (dev_priv->info->display_mmio_offset + 0x6020)
+#define _PALETTE_A (dev_priv->info.display_mmio_offset + 0xa000)
+#define _PALETTE_B (dev_priv->info.display_mmio_offset + 0xa800)
+#define _DPLL_A (dev_priv->info.display_mmio_offset + 0x6014)
+#define _DPLL_B (dev_priv->info.display_mmio_offset + 0x6018)
+#define _DPLL_A_MD (dev_priv->info.display_mmio_offset + 0x601c)
+#define _DPLL_B_MD (dev_priv->info.display_mmio_offset + 0x6020)
 
 #endif /* _I915_REG_H_ */
-- 
1.8.3.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux