Re: [PATCH 10/11] drm/i915: Add 180 degree primary plane rotation support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Feb 01, 2014 at 12:40:46AM +0530, sagar.a.kamble@xxxxxxxxx wrote:
> From: Sagar Kamble <sagar.a.kamble@xxxxxxxxx>
> 
> Primary planes support 180 degree rotation. Expose the feature
> through rotation drm property.
> 
> Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
> Signed-off-by: Sagar Kamble <sagar.a.kamble@xxxxxxxxx>
> Tested-by: Sagar Kamble <sagar.a.kamble@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_reg.h      |  1 +
>  drivers/gpu/drm/i915/intel_display.c | 54 ++++++++++++++++++++++++++++++++++--
>  drivers/gpu/drm/i915/intel_drv.h     |  2 ++
>  3 files changed, 55 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 57906c5..d3000c4 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3553,6 +3553,7 @@
>  #define   DISPPLANE_NO_LINE_DOUBLE		0
>  #define   DISPPLANE_STEREO_POLARITY_FIRST	0
>  #define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
> +#define   DISPPLANE_ROTATE_180			(1<<15)
>  #define   DISPPLANE_TRICKLE_FEED_DISABLE	(1<<14) /* Ironlake */
>  #define   DISPPLANE_TILED			(1<<10)
>  #define _DSPAADDR		(dev_priv->info->display_mmio_offset + 0x70184)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 4d4a0d9..483de59 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2037,6 +2037,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  	unsigned long linear_offset;
>  	u32 dspcntr;
>  	u32 reg;
> +	int pixel_size;
>  
>  	switch (plane) {
>  	case 0:
> @@ -2047,6 +2048,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  		return -EINVAL;
>  	}
>  
> +	pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
>  	intel_fb = to_intel_framebuffer(fb);
>  	obj = intel_fb->obj;
>  
> @@ -2054,6 +2056,8 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  	dspcntr = I915_READ(reg);
>  	/* Mask out pixel format bits in case we change it */
>  	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
> +	dspcntr &= ~DISPPLANE_ROTATE_180;
> +
>  	switch (fb->pixel_format) {
>  	case DRM_FORMAT_C8:
>  		dspcntr |= DISPPLANE_8BPP;
> @@ -2095,8 +2099,6 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  	if (IS_G4X(dev))
>  		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
>  
> -	I915_WRITE(reg, dspcntr);
> -
>  	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
>  
>  	if (INTEL_INFO(dev)->gen >= 4) {
> @@ -2109,6 +2111,17 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
>  		intel_crtc->dspaddr_offset = linear_offset;
>  	}
>  
> +	if (intel_crtc->rotation == BIT(DRM_ROTATE_180)) {
> +		dspcntr |= DISPPLANE_ROTATE_180;
> +
> +		x += (fb->width - 1);
> +		y += (fb->height - 1);
> +		linear_offset += (fb->height - 1) * fb->pitches[0] +
> +                                   fb->width * pixel_size;
> +	}
> +
> +	I915_WRITE(reg, dspcntr);
> +
>  	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
>  		      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
>  		      fb->pitches[0]);
> @@ -8748,6 +8761,31 @@ free_work:
>  	return ret;
>  }
>  
> +static int intel_crtc_set_property(struct drm_crtc *crtc,
> +				    struct drm_property *prop,
> +				    uint64_t val)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	uint64_t old_val;
> +	int ret = -ENOENT;
> +
> +	if (prop == dev_priv->rotation_property) {
> +		/* exactly one rotation angle please */
> +		if (hweight32(val & 0xf) != 1)
> +			return -EINVAL;
> +
> +		old_val = intel_crtc->rotation;
> +		intel_crtc->rotation = val;

Couple of other things we'd need to do here is check if the crtc is even
active, since calling .update_plane() on an inactive crtc would oops.

Also we need to wait for pending page flips to make sure we don't
overtake them.

Additionall the FBC code would need some rotation checks since FBC
doesn't work with a rotated plane on certain generations.

> +		ret = dev_priv->display.update_plane(crtc, crtc->fb, 0, 0);
> +		if (ret)
> +			intel_crtc->rotation = old_val;
> +	}
> +
> +	return ret;
> +}
> +
>  static struct drm_crtc_helper_funcs intel_helper_funcs = {
>  	.mode_set_base_atomic = intel_pipe_set_base_atomic,
>  	.load_lut = intel_crtc_load_lut,
> @@ -10160,6 +10198,7 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
>  	.set_config = intel_crtc_set_config,
>  	.destroy = intel_crtc_destroy,
>  	.page_flip = intel_crtc_page_flip,
> +	.set_property = intel_crtc_set_property
>  };
>  
>  static void intel_cpu_pll_init(struct drm_device *dev)
> @@ -10288,6 +10327,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
>  	 */
>  	intel_crtc->pipe = pipe;
>  	intel_crtc->plane = pipe;
> +	intel_crtc->rotation = BIT(DRM_ROTATE_0);
>  	if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
>  		DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
>  		intel_crtc->plane = !pipe;
> @@ -10298,6 +10338,16 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
>  	dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
>  	dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
>  
> +	if (!dev_priv->rotation_property)
> +		dev_priv->rotation_property =
> +			drm_mode_create_rotation_property(dev,
> +							BIT(DRM_ROTATE_0) |
> +							BIT(DRM_ROTATE_180));
> +	if (dev_priv->rotation_property)
> +		drm_object_attach_property(&intel_crtc->base.base,
> +					dev_priv->rotation_property,
> +					intel_crtc->rotation);
> +
>  	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
>  }
>  
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 7a79b8e..02dfdb6 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -331,6 +331,8 @@ struct intel_crtc {
>  	struct drm_crtc base;
>  	enum pipe pipe;
>  	enum plane plane;
> +	unsigned int rotation;
> +
>  	u8 lut_r[256], lut_g[256], lut_b[256];
>  	/*
>  	 * Whether the crtc and the connected output pipeline is active. Implies
> -- 
> 1.8.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx





[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux