[PATCH 1/4] drm/i915: Turn get_aux_clock_divider() into per-product vfuncs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A tiny clean-up to allow better code separation between platforms.

Signed-off-by: Damien Lespiau <damien.lespiau@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_dp.c  | 79 ++++++++++++++++++++++++++++------------
 drivers/gpu/drm/i915/intel_drv.h |  2 +
 2 files changed, 58 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 885d271..08e8e34 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -353,31 +353,49 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
 	return status;
 }
 
-static uint32_t get_aux_clock_divider(struct intel_dp *intel_dp,
-				      int index)
+/*
+ * The clock divider is based off the hrawclk, and would like to run at 2MHz.
+ * So, take the hrawclk value and divide by 2 and use that
+ *
+ * Note that PCH attached eDP panels should use a 125MHz input clock divider.
+ */
+
+static uint32_t i9xx_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct drm_device *dev = intel_dig_port->base.base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	/* The clock divider is based off the hrawclk,
-	 * and would like to run at 2MHz. So, take the
-	 * hrawclk value and divide by 2 and use that
-	 *
-	 * Note that PCH attached eDP panels should use a 125MHz input
-	 * clock divider.
-	 */
-	if (IS_VALLEYVIEW(dev)) {
-		return index ? 0 : 100;
-	} else if (intel_dig_port->port == PORT_A) {
-		if (index)
-			return 0;
-		if (HAS_DDI(dev))
-			return DIV_ROUND_CLOSEST(intel_ddi_get_cdclk_freq(dev_priv), 2000);
-		else if (IS_GEN6(dev) || IS_GEN7(dev))
+	return index ? 0 : intel_hrawclk(dev) / 2;
+}
+
+static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+
+	if (index)
+		return 0;
+
+	if (intel_dig_port->port == PORT_A) {
+		if (IS_GEN6(dev) || IS_GEN7(dev))
 			return 200; /* SNB & IVB eDP input clock at 400Mhz */
 		else
 			return 225; /* eDP input clock at 450Mhz */
+	} else {
+		return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
+	}
+}
+
+static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (intel_dig_port->port == PORT_A) {
+		if (index)
+			return 0;
+		return DIV_ROUND_CLOSEST(intel_ddi_get_cdclk_freq(dev_priv), 2000);
 	} else if (dev_priv->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
 		/* Workaround for non-ULT HSW */
 		switch (index) {
@@ -385,13 +403,16 @@ static uint32_t get_aux_clock_divider(struct intel_dp *intel_dp,
 		case 1: return 72;
 		default: return 0;
 		}
-	} else if (HAS_PCH_SPLIT(dev)) {
+	} else  {
 		return index ? 0 : DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
-	} else {
-		return index ? 0 :intel_hrawclk(dev) / 2;
 	}
 }
 
+static uint32_t vlv_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
+{
+	return index ? 0 : 100;
+}
+
 static int
 intel_dp_aux_ch(struct intel_dp *intel_dp,
 		uint8_t *send, int send_bytes,
@@ -450,7 +471,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 		goto out;
 	}
 
-	while ((aux_clock_divider = get_aux_clock_divider(intel_dp, clock++))) {
+	while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) {
 		/* Must try at least 3 times according to DP spec */
 		for (try = 0; try < 5; try++) {
 			/* Load the send data into the aux channel data registers */
@@ -1613,10 +1634,12 @@ static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp)
 {
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint32_t aux_clock_divider = get_aux_clock_divider(intel_dp, 0);
+	uint32_t aux_clock_divider;
 	int precharge = 0x3;
 	int msg_size = 5;       /* Header(4) + Message(1) */
 
+	aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
+
 	/* Enable PSR in sink */
 	if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT)
 		intel_dp_aux_native_write_1(intel_dp, DP_PSR_EN_CFG,
@@ -3637,6 +3660,16 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	const char *name = NULL;
 	int type, error;
 
+	/* intel_dp vfuncs */
+	if (IS_VALLEYVIEW(dev))
+		intel_dp->get_aux_clock_divider = vlv_get_aux_clock_divider;
+	else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
+		intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider;
+	else if (HAS_PCH_SPLIT(dev))
+		intel_dp->get_aux_clock_divider = ilk_get_aux_clock_divider;
+	else
+		intel_dp->get_aux_clock_divider = i9xx_get_aux_clock_divider;
+
 	/* Preserve the current hw state. */
 	intel_dp->DP = I915_READ(intel_dp->output_reg);
 	intel_dp->attached_connector = intel_connector;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 2b72b1d..6aeb62a 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -492,6 +492,8 @@ struct intel_dp {
 	unsigned long last_backlight_off;
 	bool psr_setup_done;
 	struct intel_connector *attached_connector;
+
+	uint32_t (*get_aux_clock_divider)(struct intel_dp *dp, int index);
 };
 
 struct intel_digital_port {
-- 
1.8.3.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux