Hi,
On Wednesday 08 January 2014 19:18:03, Dave Airlie wrote：
> On Wed, Jan 8, 2014 at 7:12 PM, Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
wrote:
> > On Tue, 07 Jan 2014, "Lu, Ran" <hephooey@xxxxxxxxx> wrote:
> >> Hi Jani,
> >>
> >> As a matter of fact, I tried kernel from 3.9 to 3.13-rc6, all of them
> >> cannot read the pci information from 0:2.0, and lspci do not have Iris
> >> Pro as a video controller. I put in the attachment dmesg output from
> >> 3.12.6, I added some printk to show the results from
> >> pci_bus_read_dev_vendor_id, otherwise it is a vanilla kernel. I do not
> >> think I get any extra information by adding drm.debug=0xe because the
> >> pci device is never registered properly, but it was there anyway.The
> >> weird thing is grub can read pci device fine, I took a picture since I
> >> do not know how to save outputs in grub console. I did some test with
> >> another laptop with a working HD 4600. It seems even if I use setpci -s
> >> 0:2.0 4.b=0 to disable the device, it is still responsive to further
> >> setpci and I can bring it back by setting 4.b=7. Now it does not look
> >> like the video card is disable. I guess maybe something wrong in the
> >> ACPI table triggered the kernel to read the wrong place. But still
> >> strange it only missed that particular bus. In case you are interested,
> >> I also put the dsdt table in the attachment, I can provide other tables
> >> if they are important.
> >
> > I don't have much clues here. Are there any bios settings you could
> > tweak? Did you try without the nvidia driver loaded?
>
> The EFI disables it, at least as on the previous model.
>
> It was possible to install an ap under OSX set the intel gfx as the default,
> and reboot.
Thanks Dave and Jani, turns out there is a patch for grub [1] to fake a mac
system so the efi enables everything. I can use IGPU after grub was patched. It
seems I cannot use external monitor though, only the nouveau driver found
external monitor like DP-2, I heard it is because intel GPU are not wired
physically to the port (which is a bit weird since it is also a thunderbolt
port). Other than that everything is fine and the battery drain reduced about
30%. The new dmesg is in the attachment in case you are interested.
[1] http://lists.gnu.org/archive/html/grub-devel/2013-12/msg00442.html
--
Best Regards,
LR
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4105620
[ 0.000000] Kernel command line: root=/dev/sda2 ro BOOT_IMAGE=/vmlinuz-3.13.0-rc7 root=/dev/sda2 ro libata.force=noncq drm.debug=0xe i915.modeset=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 16095688K/16683264K available (3822K kernel code, 487K rwdata, 1428K rodata, 836K init, 856K bss, 587576K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 2294.932 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.86 BogoMIPS (lpj=2294932)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000019] init_memory_mapping: [mem 0x7ae39000-0x7ae8efff]
[ 0.000020] [mem 0x7ae39000-0x7ae8efff] page 4k
[ 0.000026] init_memory_mapping: [mem 0x7aed0000-0x7aefefff]
[ 0.000027] [mem 0x7aed0000-0x7aefefff] page 4k
[ 0.000055] init_memory_mapping: [mem 0x7b000000-0x7f9fffff]
[ 0.000056] [mem 0x7b000000-0x7f9fffff] page 2M
[ 0.021300] Mount-cache hash table entries: 256
[ 0.021396] CPU: Physical Processor ID: 0
[ 0.021397] CPU: Processor Core ID: 0
[ 0.021400] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.022158] mce: CPU supports 10 MCE banks
[ 0.022170] CPU0: Thermal monitoring enabled (TM1)
[ 0.022179] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
[ 0.022246] Freeing SMP alternatives memory: 16K (ffffffff8174c000 - ffffffff81750000)
[ 0.022248] ACPI: Core revision 20131115
[ 0.033639] ACPI: All ACPI Tables successfully acquired
[ 0.038335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048333] smpboot: CPU0: Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz (fam: 06, model: 46, stepping: 01)
[ 0.048342] TSC deadline timer enabled
[ 0.048348] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.048353] ... version: 3
[ 0.048354] ... bit width: 48
[ 0.048355] ... generic registers: 4
[ 0.048356] ... value mask: 0000ffffffffffff
[ 0.048357] ... max period: 0000ffffffffffff
[ 0.048357] ... fixed-purpose events: 3
[ 0.048358] ... event mask: 000000070000000f
[ 0.048485] x86: Booting SMP configuration:
[ 0.048486] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.172833] x86: Booted up 1 node, 8 CPUs
[ 0.172836] smpboot: Total of 8 processors activated (36718.91 BogoMIPS)
[ 0.249093] devtmpfs: initialized
[ 0.249180] PM: Registering ACPI NVS region [mem 0x7ad14000-0x7ad52fff] (258048 bytes)
[ 0.249309] NET: Registered protocol family 16
[ 0.249452] cpuidle: using governor menu
[ 0.249462] ACPI: bus type PCI registered
[ 0.249514] PCI: MMCONFIG for domain 0000 [bus 00-9c] at [mem 0xe0000000-0xe9cfffff] (base 0xe0000000)
[ 0.249516] PCI: not using MMCONFIG
[ 0.249517] PCI: Using configuration type 1 for base access
[ 0.251140] bio: create slab <bio-0> at 0
[ 0.251258] ACPI: Added _OSI(Module Device)
[ 0.251260] ACPI: Added _OSI(Processor Device)
[ 0.251261] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.251262] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.253570] ACPI : EC: EC description table is found, configuring boot EC
[ 0.259296] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 2.268627] ACPI: SSDT 000000007af7d890 0004F0 (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
[ 2.269239] ACPI: Dynamic OEM Table Load:
[ 2.269241] ACPI: SSDT (null) 0004F0 (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
[ 2.273735] ACPI: SSDT 000000007af7e190 00067C (v01 PmRef ApIst 00003000 INTL 20100915)
[ 2.274413] ACPI: Dynamic OEM Table Load:
[ 2.274414] ACPI: SSDT (null) 00067C (v01 PmRef ApIst 00003000 INTL 20100915)
[ 2.278624] ACPI: SSDT 000000007af7cd90 000119 (v01 PmRef ApCst 00003000 INTL 20100915)
[ 2.279229] ACPI: Dynamic OEM Table Load:
[ 2.279231] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100915)
[ 2.284466] ACPI: Interpreter enabled
[ 2.284472] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 2.284478] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 2.284487] ACPI: (supports S0 S3 S5)
[ 2.284488] ACPI: Using IOAPIC for interrupt routing
[ 2.284502] PCI: MMCONFIG for domain 0000 [bus 00-9c] at [mem 0xe0000000-0xe9cfffff] (base 0xe0000000)
[ 2.284917] PCI: MMCONFIG at [mem 0xe0000000-0xe9cfffff] reserved in ACPI motherboard resources
[ 2.298978] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.299105] ACPI: No dock devices found.
[ 2.309682] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 2.309687] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 2.309806] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 2.309958] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9c] only partially covers this bridge
[ 2.309989] PCI host bridge to bus 0000:00
[ 2.309991] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.309993] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 2.309995] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 2.309996] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 2.309998] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 2.310000] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 2.310001] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 2.310003] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 2.310005] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 2.310006] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 2.310008] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 2.310010] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 2.310011] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 2.310013] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 2.310015] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 2.310016] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 2.310018] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 2.310020] pci_bus 0000:00: root bus resource [mem 0x7fa00000-0xfeafffff]
[ 2.310021] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 2.310023] pci_bus 0000:00: scanning bus
[ 2.310030] pci 0000:00:00.0: [8086:0d04] type 00 class 0x060000
[ 2.310042] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10
[ 2.310114] pci 0000:00:01.0: [8086:0d01] type 01 class 0x060400
[ 2.310132] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x20
[ 2.310149] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 2.310151] pci 0000:00:01.0: PME# disabled
[ 2.310178] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 2.310213] pci 0000:00:01.1: [8086:0d05] type 01 class 0x060400
[ 2.310227] pci 0000:00:01.1: calling pci_fixup_transparent_bridge+0x0/0x20
[ 2.310244] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 2.310246] pci 0000:00:01.1: PME# disabled
[ 2.310271] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 2.310321] pci 0000:00:02.0: [8086:0d26] type 00 class 0x030000
[ 2.310331] pci 0000:00:02.0: reg 0x10: [mem 0xc1400000-0xc17fffff 64bit]
[ 2.310336] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 2.310339] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 2.310398] pci 0000:00:03.0: [8086:0d0c] type 00 class 0x040300
[ 2.310404] pci 0000:00:03.0: reg 0x10: [mem 0xc1e10000-0xc1e13fff 64bit]
[ 2.310488] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 2.310506] pci 0000:00:14.0: reg 0x10: [mem 0xc1e00000-0xc1e0ffff 64bit]
[ 2.310560] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 2.310563] pci 0000:00:14.0: PME# disabled
[ 2.310582] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 2.310628] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 2.310647] pci 0000:00:16.0: reg 0x10: [mem 0xc1e19100-0xc1e1910f 64bit]
[ 2.310704] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 2.310707] pci 0000:00:16.0: PME# disabled
[ 2.310772] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 2.310786] pci 0000:00:1b.0: reg 0x10: [mem 0xc1e14000-0xc1e17fff 64bit]
[ 2.310844] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.310847] pci 0000:00:1b.0: PME# disabled
[ 2.310868] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 2.310907] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 2.310933] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x20
[ 2.310967] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.310971] pci 0000:00:1c.0: PME# disabled
[ 2.311032] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 2.311064] pci 0000:00:1c.2: calling pci_fixup_transparent_bridge+0x0/0x20
[ 2.311099] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 2.311102] pci 0000:00:1c.2: PME# disabled
[ 2.311125] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 2.311163] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 2.311194] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x20
[ 2.311229] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 2.311232] pci 0000:00:1c.3: PME# disabled
[ 2.311255] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 2.311293] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 2.311338] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x20
[ 2.311372] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 2.311375] pci 0000:00:1c.4: PME# disabled
[ 2.311397] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 2.311436] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[ 2.311571] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 2.311582] pci 0000:00:1f.3: reg 0x10: [mem 0xc1e19000-0xc1e190ff 64bit]
[ 2.311596] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 2.311651] pci_bus 0000:00: fixups for bus
[ 2.311653] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 0
[ 2.311681] pci_bus 0000:01: scanning bus
[ 2.311701] pci 0000:01:00.0: [10de:0fe9] type 00 class 0x030000
[ 2.311711] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff]
[ 2.311722] pci 0000:01:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref]
[ 2.311732] pci 0000:01:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref]
[ 2.311739] pci 0000:01:00.0: reg 0x24: [io 0x1000-0x107f]
[ 2.311746] pci 0000:01:00.0: reg 0x30: [mem 0xc1000000-0xc107ffff pref]
[ 2.311797] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 2.311838] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[ 2.311845] pci 0000:01:00.1: reg 0x10: [mem 0xc1080000-0xc1083fff]
[ 2.313618] pci_bus 0000:01: fixups for bus
[ 2.313620] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 2.313622] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 2.313624] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
[ 2.313627] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 2.313628] pci_bus 0000:01: bus scan returning with max=01
[ 2.313631] pci 0000:00:01.1: scanning [bus 06-9c] behind bridge, pass 0
[ 2.313666] pci_bus 0000:06: scanning bus
[ 2.313667] pci_bus 0000:06: fixups for bus
[ 2.313668] pci 0000:00:01.1: PCI bridge to [bus 06-9c]
[ 2.313670] pci 0000:00:01.1: bridge window [io 0x3000-0x5fff]
[ 2.313672] pci 0000:00:01.1: bridge window [mem 0xc1f00000-0xcdffffff]
[ 2.313675] pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
[ 2.313676] pci_bus 0000:06: bus scan returning with max=06
[ 2.313685] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 0
[ 2.313737] pci_bus 0000:02: scanning bus
[ 2.313745] pci_bus 0000:02: fixups for bus
[ 2.313746] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 2.313755] pci_bus 0000:02: bus scan returning with max=02
[ 2.313758] pci 0000:00:1c.2: scanning [bus 03-03] behind bridge, pass 0
[ 2.313809] pci_bus 0000:03: scanning bus
[ 2.313883] pci 0000:03:00.0: [14e4:43a0] type 00 class 0x028000
[ 2.313916] pci 0000:03:00.0: reg 0x10: [mem 0xc1a00000-0xc1a07fff 64bit]
[ 2.313945] pci 0000:03:00.0: reg 0x18: [mem 0xc1800000-0xc19fffff 64bit]
[ 2.314090] pci 0000:03:00.0: supports D1 D2
[ 2.314091] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.314098] pci 0000:03:00.0: PME# disabled
[ 2.314141] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 2.315655] pci_bus 0000:03: fixups for bus
[ 2.315656] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 2.315661] pci 0000:00:1c.2: bridge window [mem 0xc1800000-0xc1afffff]
[ 2.315666] pci_bus 0000:03: bus scan returning with max=03
[ 2.315670] pci 0000:00:1c.3: scanning [bus 04-04] behind bridge, pass 0
[ 2.315722] pci_bus 0000:04: scanning bus
[ 2.315751] pci 0000:04:00.0: [14e4:1570] type 00 class 0x048000
[ 2.315771] pci 0000:04:00.0: reg 0x10: [mem 0xc1d00000-0xc1d0ffff 64bit]
[ 2.315788] pci 0000:04:00.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.315804] pci 0000:04:00.0: reg 0x20: [mem 0xc1c00000-0xc1cfffff 64bit]
[ 2.315869] pci 0000:04:00.0: supports D1
[ 2.315870] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 2.315874] pci 0000:04:00.0: PME# disabled
[ 2.317623] pci_bus 0000:04: fixups for bus
[ 2.317624] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 2.317629] pci 0000:00:1c.3: bridge window [mem 0xc1c00000-0xc1dfffff]
[ 2.317635] pci 0000:00:1c.3: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.317636] pci_bus 0000:04: bus scan returning with max=04
[ 2.317639] pci 0000:00:1c.4: scanning [bus 05-05] behind bridge, pass 0
[ 2.317691] pci_bus 0000:05: scanning bus
[ 2.317762] pci 0000:05:00.0: [144d:1600] type 00 class 0x010601
[ 2.317821] pci 0000:05:00.0: reg 0x24: [mem 0xc1b00000-0xc1b01fff]
[ 2.317833] pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 2.317886] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 2.317890] pci 0000:05:00.0: PME# disabled
[ 2.319624] pci_bus 0000:05: fixups for bus
[ 2.319626] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 2.319631] pci 0000:00:1c.4: bridge window [mem 0xc1b00000-0xc1bfffff]
[ 2.319636] pci_bus 0000:05: bus scan returning with max=05
[ 2.319639] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 1
[ 2.319642] pci 0000:00:01.1: scanning [bus 06-9c] behind bridge, pass 1
[ 2.319651] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 1
[ 2.319656] pci 0000:00:1c.2: scanning [bus 03-03] behind bridge, pass 1
[ 2.319662] pci 0000:00:1c.3: scanning [bus 04-04] behind bridge, pass 1
[ 2.319667] pci 0000:00:1c.4: scanning [bus 05-05] behind bridge, pass 1
[ 2.319671] pci_bus 0000:00: bus scan returning with max=9c
[ 2.319735] pci_bus 0000:00: on NUMA node 0
[ 2.320983] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.321040] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.321088] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.321141] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.321187] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.321238] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.321285] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.321336] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.322621] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 2.322628] ACPI: \_SB_.PCI0: notify handler is installed
[ 2.322690] Found 1 acpi root devices
[ 2.322712] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 2.322813] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.322826] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 2.322828] vgaarb: loaded
[ 2.322829] vgaarb: bridge control possible 0000:01:00.0
[ 2.322830] vgaarb: no bridge control possible 0000:00:02.0
[ 2.322908] SCSI subsystem initialized
[ 2.322978] libata version 3.00 loaded.
[ 2.323063] PCI: Using ACPI for IRQ routing
[ 2.324455] PCI: pci_cache_line_size set to 64 bytes
[ 2.324472] pci 0000:01:00.0: BAR 0: reserving [mem 0xc0000000-0xc0ffffff flags 0x40200] (d=0, p=0)
[ 2.324474] pci 0000:01:00.0: BAR 1: reserving [mem 0x80000000-0x8fffffff flags 0x14220c] (d=0, p=0)
[ 2.324475] pci 0000:01:00.0: BAR 3: reserving [mem 0x90000000-0x91ffffff flags 0x14220c] (d=0, p=0)
[ 2.324479] pci 0000:00:02.0: BAR 0: reserving [mem 0xc1400000-0xc17fffff flags 0x140204] (d=0, p=0)
[ 2.324480] pci 0000:00:02.0: BAR 2: reserving [mem 0xb0000000-0xbfffffff flags 0x14220c] (d=0, p=0)
[ 2.324482] pci 0000:00:02.0: BAR 4: reserving [io 0x2000-0x203f flags 0x40101] (d=0, p=0)
[ 2.324484] pci 0000:00:03.0: BAR 0: reserving [mem 0xc1e10000-0xc1e13fff flags 0x140204] (d=0, p=0)
[ 2.324492] pci 0000:00:14.0: BAR 0: reserving [mem 0xc1e00000-0xc1e0ffff flags 0x140204] (d=0, p=0)
[ 2.324495] pci 0000:00:16.0: BAR 0: reserving [mem 0xc1e19100-0xc1e1910f flags 0x140204] (d=0, p=0)
[ 2.324497] pci 0000:00:1b.0: BAR 0: reserving [mem 0xc1e14000-0xc1e17fff flags 0x140204] (d=0, p=0)
[ 2.324546] pci 0000:03:00.0: BAR 0: reserving [mem 0xc1a00000-0xc1a07fff flags 0x140204] (d=0, p=0)
[ 2.324547] pci 0000:03:00.0: BAR 2: reserving [mem 0xc1800000-0xc19fffff flags 0x140204] (d=0, p=0)
[ 2.324558] pci 0000:04:00.0: BAR 0: reserving [mem 0xc1d00000-0xc1d0ffff flags 0x140204] (d=0, p=0)
[ 2.324559] pci 0000:04:00.0: BAR 2: reserving [mem 0xa0000000-0xafffffff flags 0x14220c] (d=0, p=0)
[ 2.324560] pci 0000:04:00.0: BAR 4: reserving [mem 0xc1c00000-0xc1cfffff flags 0x140204] (d=0, p=0)
[ 2.324567] pci 0000:05:00.0: BAR 5: reserving [mem 0xc1b00000-0xc1b01fff flags 0x40200] (d=0, p=0)
[ 2.324581] pci 0000:01:00.0: BAR 5: reserving [io 0x1000-0x107f flags 0x40101] (d=1, p=1)
[ 2.324583] pci 0000:01:00.1: BAR 0: reserving [mem 0xc1080000-0xc1083fff flags 0x40200] (d=1, p=1)
[ 2.324644] pci 0000:00:1f.3: BAR 0: reserving [mem 0xc1e19000-0xc1e190ff flags 0x140204] (d=1, p=1)
[ 2.324646] pci 0000:00:1f.3: BAR 4: reserving [io 0xefa0-0xefbf flags 0x40101] (d=1, p=1)
[ 2.324648] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 2.324649] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 2.324649] e820: reserve RAM buffer [mem 0x7ad14000-0x7bffffff]
[ 2.324651] e820: reserve RAM buffer [mem 0x7ad60000-0x7bffffff]
[ 2.324652] e820: reserve RAM buffer [mem 0x7ae39000-0x7bffffff]
[ 2.324653] e820: reserve RAM buffer [mem 0x7aed0000-0x7bffffff]
[ 2.324654] e820: reserve RAM buffer [mem 0x7af7b000-0x7bffffff]
[ 2.324655] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[ 2.324655] e820: reserve RAM buffer [mem 0x47f600000-0x47fffffff]
[ 2.324768] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.324772] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.327804] Switched to clocksource hpet
[ 2.328833] pnp: PnP ACPI init
[ 2.328838] ACPI: bus type PNP registered
[ 2.329164] pnp 00:00: [dma 4]
[ 2.329200] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.329236] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 2.329336] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 2.329338] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 2.329379] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.329421] system 00:04: [io 0xffff] has been reserved
[ 2.329423] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 2.329424] system 00:04: [io 0x0800-0x087f] has been reserved
[ 2.329426] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.329461] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.329507] pnp 00:06: Plug and Play ACPI device, IDs APP0001 (active)
[ 2.329564] pnp 00:07: Plug and Play ACPI device, IDs APP000b (active)
[ 2.329663] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.329665] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 2.329666] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.329667] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.329669] system 00:08: [mem 0xe0000000-0xefffffff] could not be reserved
[ 2.329670] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.329672] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 2.329673] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.329674] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 2.329676] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 2.329677] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.329726] system 00:09: [mem 0x20000000-0x201fffff] could not be reserved
[ 2.329728] system 00:09: [mem 0x40000000-0x401fffff] could not be reserved
[ 2.329729] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.331482] pnp: PnP ACPI: found 10 devices
[ 2.331483] ACPI: bus type PNP unregistered
[ 2.339947] pci 0000:05:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 2.339966] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 2.339968] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 2.339969] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 2.339992] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 2.339993] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 2.339994] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 2.339997] pci 0000:00:1c.0: BAR 8: assigned [mem 0x7fa00000-0x7fbfffff]
[ 2.339999] pci 0000:00:1c.0: BAR 9: assigned [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 2.340002] pci 0000:00:1c.4: BAR 9: assigned [mem 0x7fe00000-0x7fefffff pref]
[ 2.340004] pci 0000:00:1c.0: BAR 7: assigned [io 0x6000-0x6fff]
[ 2.340005] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 2.340007] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 2.340009] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
[ 2.340011] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 2.340014] pci 0000:00:01.1: PCI bridge to [bus 06-9c]
[ 2.340015] pci 0000:00:01.1: bridge window [io 0x3000-0x5fff]
[ 2.340018] pci 0000:00:01.1: bridge window [mem 0xc1f00000-0xcdffffff]
[ 2.340020] pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
[ 2.340022] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 2.340029] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 2.340033] pci 0000:00:1c.0: bridge window [mem 0x7fa00000-0x7fbfffff]
[ 2.340037] pci 0000:00:1c.0: bridge window [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 2.340042] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 2.340046] pci 0000:00:1c.2: bridge window [mem 0xc1800000-0xc1afffff]
[ 2.340053] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 2.340057] pci 0000:00:1c.3: bridge window [mem 0xc1c00000-0xc1dfffff]
[ 2.340061] pci 0000:00:1c.3: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.340066] pci 0000:05:00.0: BAR 6: assigned [mem 0x7fe00000-0x7fe0ffff pref]
[ 2.340068] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 2.340072] pci 0000:00:1c.4: bridge window [mem 0xc1b00000-0xc1bfffff]
[ 2.340076] pci 0000:00:1c.4: bridge window [mem 0x7fe00000-0x7fefffff pref]
[ 2.340081] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.340082] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.340083] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.340084] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 2.340084] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 2.340085] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 2.340086] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 2.340087] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 2.340088] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 2.340088] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 2.340089] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 2.340090] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 2.340090] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 2.340091] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 2.340092] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 2.340092] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 2.340093] pci_bus 0000:00: resource 20 [mem 0x7fa00000-0xfeafffff]
[ 2.340094] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[ 2.340095] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 2.340095] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc10fffff]
[ 2.340096] pci_bus 0000:01: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
[ 2.340097] pci_bus 0000:06: resource 0 [io 0x3000-0x5fff]
[ 2.340098] pci_bus 0000:06: resource 1 [mem 0xc1f00000-0xcdffffff]
[ 2.340098] pci_bus 0000:06: resource 2 [mem 0xce000000-0xd9ffffff 64bit pref]
[ 2.340099] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
[ 2.340100] pci_bus 0000:02: resource 1 [mem 0x7fa00000-0x7fbfffff]
[ 2.340101] pci_bus 0000:02: resource 2 [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 2.340101] pci_bus 0000:03: resource 1 [mem 0xc1800000-0xc1afffff]
[ 2.340102] pci_bus 0000:04: resource 1 [mem 0xc1c00000-0xc1dfffff]
[ 2.340103] pci_bus 0000:04: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.340104] pci_bus 0000:05: resource 1 [mem 0xc1b00000-0xc1bfffff]
[ 2.340104] pci_bus 0000:05: resource 2 [mem 0x7fe00000-0x7fefffff pref]
[ 2.340121] NET: Registered protocol family 2
[ 2.340188] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.340305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.340418] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.340429] TCP: reno registered
[ 2.340431] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 2.340468] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 2.340528] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xd0
[ 2.340529] pci 0000:00:02.0: Boot video device
[ 2.340533] pci 0000:00:14.0: calling quirk_remove_d3_delay+0x0/0x10
[ 2.340536] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x690
[ 2.340668] pci 0000:00:16.0: calling quirk_remove_d3_delay+0x0/0x10
[ 2.340671] pci 0000:00:1b.0: calling quirk_remove_d3_delay+0x0/0x10
[ 2.340680] pci 0000:00:1c.4: calling quirk_remove_d3_delay+0x0/0x10
[ 2.340685] pci 0000:00:1f.3: calling quirk_remove_d3_delay+0x0/0x10
[ 2.340688] pci 0000:01:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x20
[ 2.340706] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xd0
[ 2.340709] pci 0000:01:00.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x20
[ 2.340767] PCI: CLS 256 bytes, default 64
[ 2.340794] dmar: Host address width 39
[ 2.340795] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 2.340815] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 2.340816] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 2.340821] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 2.340822] dmar: RMRR base: 0x0000007b800000 end: 0x0000007f9fffff
[ 2.340825] DMAR: No ATSR found
[ 2.340842] IOMMU 0 0xfed90000: using Queued invalidation
[ 2.340844] IOMMU 1 0xfed91000: using Queued invalidation
[ 2.340845] IOMMU: Setting RMRR:
[ 2.340854] IOMMU: Setting identity map for device 0000:00:02.0 [0x7b800000 - 0x7f9fffff]
[ 2.341170] IOMMU: Prepare 0-16MiB unity mapping for LPC
[ 2.341176] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 2.341358] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[ 2.344387] audit: initializing netlink socket (disabled)
[ 2.344397] type=2000 audit(1389163804.249:1): initialized
[ 2.347694] msgmni has been set to 32005
[ 2.348206] alg: No test for stdrng (krng)
[ 2.348294] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.348296] io scheduler noop registered
[ 2.348298] io scheduler deadline registered (default)
[ 2.348434] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 2.348584] pcieport 0000:00:01.1: irq 43 for MSI/MSI-X
[ 2.348684] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[ 2.348743] pcieport 0000:00:1c.0: enabling bus mastering
[ 2.348756] pcieport 0000:00:1c.0: irq 44 for MSI/MSI-X
[ 2.348941] pcieport 0000:00:1c.2: irq 45 for MSI/MSI-X
[ 2.349080] pcieport 0000:00:1c.3: irq 46 for MSI/MSI-X
[ 2.349219] pcieport 0000:00:1c.4: irq 47 for MSI/MSI-X
[ 2.349336] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 2.349338] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.349340] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 2.349342] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 2.349351] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[ 2.349354] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
[ 2.349372] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 2.349381] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 2.349394] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 2.349395] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 2.349405] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 2.349419] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 2.349420] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 2.349424] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 2.349437] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 2.349439] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 2.349448] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 2.351884] simple-framebuffer simple-framebuffer.0: framebuffer at 0xb0000000, 0x1437000 bytes, mapped to 0xffffc90009e00000
[ 2.351886] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=2880x1800x32, linelength=11776
[ 2.360653] Console: switching to colour frame buffer device 360x112
[ 2.369335] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 2.369376] intel_idle: MWAIT substates: 0x42120
[ 2.369376] intel_idle: v0.4 model 0x46
[ 2.369376] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.369524] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 2.369558] ACPI: Lid Switch [LID0]
[ 2.369603] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.369623] ACPI: Power Button [PWRB]
[ 2.369668] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 2.369687] ACPI: Sleep Button [SLPB]
[ 2.369730] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.369747] ACPI: Power Button [PWRF]
[ 2.370188] ahci 0000:05:00.0: version 3.0
[ 2.370265] ahci 0000:05:00.0: irq 48 for MSI/MSI-X
[ 2.380812] ahci 0000:05:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 2.380841] ahci 0000:05:00.0: flags: 64bit ncq led clo only pio ccc
[ 2.381245] scsi0 : ahci
[ 2.381375] ata1: SATA max UDMA/133 abar m8192@0xc1b00000 port 0xc1b00100 irq 48
[ 2.381675] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.687638] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.687794] ata1.00: FORCE: horkage modified (noncq)
[ 2.687845] ata1.00: unexpected _GTF length (8)
[ 2.687898] ata1.00: ATA-8: APPLE SSD SM0512F, UXM2JA1Q, max UDMA/133
[ 2.687913] ata1.00: 977105060 sectors, multi 16: LBA48 NCQ (not used)
[ 2.688100] ata1.00: unexpected _GTF length (8)
[ 2.688152] ata1.00: configured for UDMA/133
[ 2.688228] scsi 0:0:0:0: Direct-Access ATA APPLE SSD SM0512 UXM2 PQ: 0 ANSI: 5
[ 2.688511] sd 0:0:0:0: [sda] 977105060 512-byte logical blocks: (500 GB/465 GiB)
[ 2.688537] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.688623] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.688691] sd 0:0:0:0: [sda] Write Protect is off
[ 2.688704] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.688741] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.690971] sda: sda1 sda2 sda3
[ 2.691642] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.344327] tsc: Refined TSC clocksource calibration: 2294.686 MHz
[ 3.515417] i8042: No controller found
[ 3.515694] mousedev: PS/2 mouse device common for all mice
[ 3.515823] rtc_cmos 00:05: RTC can wake from S4
[ 3.516058] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.516109] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.516225] Intel P-state driver initializing.
[ 3.516241] Intel pstate controlling: cpu 0
[ 3.516258] Intel pstate controlling: cpu 1
[ 3.516287] Intel pstate controlling: cpu 2
[ 3.516300] Intel pstate controlling: cpu 3
[ 3.516324] Intel pstate controlling: cpu 4
[ 3.516349] Intel pstate controlling: cpu 5
[ 3.516383] Intel pstate controlling: cpu 6
[ 3.516397] Intel pstate controlling: cpu 7
[ 3.516654] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.517230] TCP: cubic registered
[ 3.517854] registered taskstats version 1
[ 3.518441] rtc_cmos 00:05: setting system clock to 2014-01-08 06:50:06 UTC (1389163806)
[ 3.519383] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 3.519405] EXT4-fs (sda2): write access will be enabled during recovery
[ 3.541342] EXT4-fs (sda2): recovery complete
[ 3.545139] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.545178] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 3.545697] Freeing unused kernel memory: 836K (ffffffff8167b000 - ffffffff8174c000)
[ 3.545723] Write protecting the kernel read-only data: 6144k
[ 3.546342] Freeing unused kernel memory: 264K (ffff8800013be000 - ffff880001400000)
[ 3.547294] Freeing unused kernel memory: 620K (ffff880001565000 - ffff880001600000)
[ 3.766838] NET: Registered protocol family 1
[ 3.773149] systemd-udevd[839]: starting version 208
[ 3.774243] random: udevd urandom read with 73 bits of entropy available
[ 3.799536] ACPI: AC Adapter [ADP1] (on-line)
[ 3.806167] ACPI: bus type USB registered
[ 3.806203] usbcore: registered new interface driver usbfs
[ 3.806222] Linux agpgart interface v0.103
[ 3.806226] usbcore: registered new interface driver hub
[ 3.806270] usbcore: registered new device driver usb
[ 3.808618] apple_gmux: Found gmux version 4.0.8 [indexed]
[ 3.810542] [drm] Initialized drm 1.1.0 20060810
[ 3.810834] xhci_hcd 0000:00:14.0: enabling bus mastering
[ 3.810845] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.810850] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 3.811009] xhci_hcd 0000:00:14.0: cache line size of 256 is not supported
[ 3.811026] xhci_hcd 0000:00:14.0: irq 49 for MSI/MSI-X
[ 3.811749] hub 1-0:1.0: USB hub found
[ 3.811774] hub 1-0:1.0: 14 ports detected
[ 3.812412] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.812415] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 3.812620] hub 2-0:1.0: USB hub found
[ 3.812653] hub 2-0:1.0: 6 ports detected
[ 3.820187] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 3.823369] microcode: CPU0 sig=0x40661, pf=0x20, revision=0xf
[ 3.824299] lib80211: common routines for IEEE802.11 drivers
[ 3.824300] lib80211_crypt: registered algorithm 'NULL'
[ 3.826727] platform microcode: Direct firmware load failed with error -2
[ 3.826729] platform microcode: Falling back to user helper
[ 3.826922] microcode: CPU1 sig=0x40661, pf=0x20, revision=0xf
[ 3.826931] platform microcode: Direct firmware load failed with error -2
[ 3.826933] platform microcode: Falling back to user helper
[ 3.827175] microcode: CPU2 sig=0x40661, pf=0x20, revision=0xf
[ 3.827183] platform microcode: Direct firmware load failed with error -2
[ 3.827185] platform microcode: Falling back to user helper
[ 3.827384] microcode: CPU3 sig=0x40661, pf=0x20, revision=0xf
[ 3.827391] platform microcode: Direct firmware load failed with error -2
[ 3.827392] platform microcode: Falling back to user helper
[ 3.827588] microcode: CPU4 sig=0x40661, pf=0x20, revision=0xf
[ 3.827596] platform microcode: Direct firmware load failed with error -2
[ 3.827597] platform microcode: Falling back to user helper
[ 3.827812] microcode: CPU5 sig=0x40661, pf=0x20, revision=0xf
[ 3.827819] platform microcode: Direct firmware load failed with error -2
[ 3.827820] platform microcode: Falling back to user helper
[ 3.828035] microcode: CPU6 sig=0x40661, pf=0x20, revision=0xf
[ 3.828043] platform microcode: Direct firmware load failed with error -2
[ 3.828044] platform microcode: Falling back to user helper
[ 3.828290] microcode: CPU7 sig=0x40661, pf=0x20, revision=0xf
[ 3.828295] platform microcode: Direct firmware load failed with error -2
[ 3.828296] platform microcode: Falling back to user helper
[ 3.828545] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 3.831290] cfg80211: Calling CRDA to update world regulatory domain
[ 3.835799] input: HDA Intel PCH SPDIF as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 3.835853] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
[ 3.835893] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input4
[ 3.836050] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
[ 3.836052] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 3.836102] hda_intel: Disabling MSI
[ 3.836107] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 3.836146] snd_hda_intel 0000:01:00.1: enabling bus mastering
[ 3.836149] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 3.836153] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.836410] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0d26 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
[ 3.836635] [drm] Found 128MB of eLLC
[ 3.836637] [drm:intel_detect_pch], Found LynxPoint PCH
[ 3.837061] [drm] Memory usable by graphics device = 2048M
[ 3.837062] [drm:i915_gem_gtt_init], GMADR size = 256M
[ 3.837063] [drm:i915_gem_gtt_init], GTT stolen size = 64M
[ 3.837064] checking generic (b0000000 1437000) vs hw (b0000000 10000000)
[ 3.837065] fb: conflicting fb hw usage inteldrmfb vs simple - removing generic driver
[ 3.837079] Console: switching to colour dummy device 80x25
[ 3.855195] wl: module license 'Mixed/Proprietary' taints kernel.
[ 3.855197] Disabling lock debugging due to kernel taint
[ 3.860411] cfg80211: World regulatory domain updated:
[ 3.860413] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.860415] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.860416] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.860416] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3.860417] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.860418] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.863652] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7ad18190
[ 3.863675] [drm:intel_opregion_setup], Public ACPI methods supported
[ 3.863676] [drm:intel_opregion_setup], SWSCI supported
[ 3.867029] [drm:swsci_setup], SWSCI GBDA callbacks 00040001, SBCB callbacks 00200001
[ 3.867031] [drm:intel_opregion_setup], ASLE supported
[ 3.867386] i915 0000:00:02.0: irq 51 for MSI/MSI-X
[ 3.867397] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.867398] [drm] Driver supports precise vblank timestamp query.
[ 3.867399] [drm:init_vbt_defaults], Set default to SSC at 120MHz
[ 3.867400] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL d
[ 3.867401] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 3.867402] [drm:parse_general_definitions], crt_ddc_bus_pin: 0
[ 3.867404] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 3.867405] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[ 3.867407] [drm:parse_lfp_panel_data], VBT initial LVDS value 300
[ 3.867408] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 3.867408] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 3.867410] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 3.867411] [drm:parse_mipi], No MIPI BDB found
[ 3.867412] [drm:parse_ddi_port],
[ 3.867412] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
[ 3.867413] [drm:parse_ddi_port], VBT HDMI level shift for port A: 0
[ 3.867414] [drm:parse_ddi_port], Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
[ 3.867415] [drm:parse_ddi_port], VBT HDMI level shift for port B: 6
[ 3.867415] [drm:parse_ddi_port], Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
[ 3.867416] [drm:parse_ddi_port], VBT HDMI level shift for port C: 6
[ 3.867417] [drm:parse_ddi_port], Port D VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
[ 3.867417] [drm:parse_ddi_port], VBT HDMI level shift for port D: 6
[ 3.867447] [drm:intel_dsm_pci_probe], failed to get supported _DSM functions
[ 3.867448] [drm:intel_dsm_detect], VGA switcheroo: detected DSM switching method \_SB_.PCI0.IGPU handle
[ 3.867452] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at 7ba00000
[ 3.867724] [drm:intel_print_wm_latency], Primary WM0 latency 20 (2.0 usec)
[ 3.867725] [drm:intel_print_wm_latency], Primary WM1 latency 4 (2.0 usec)
[ 3.867726] [drm:intel_print_wm_latency], Primary WM2 latency 36 (18.0 usec)
[ 3.867726] [drm:intel_print_wm_latency], Primary WM3 latency 70 (35.0 usec)
[ 3.867727] [drm:intel_print_wm_latency], Primary WM4 latency 160 (80.0 usec)
[ 3.867728] [drm:intel_print_wm_latency], Sprite WM0 latency 20 (2.0 usec)
[ 3.867728] [drm:intel_print_wm_latency], Sprite WM1 latency 4 (2.0 usec)
[ 3.867729] [drm:intel_print_wm_latency], Sprite WM2 latency 36 (18.0 usec)
[ 3.867730] [drm:intel_print_wm_latency], Sprite WM3 latency 70 (35.0 usec)
[ 3.867730] [drm:intel_print_wm_latency], Sprite WM4 latency 160 (80.0 usec)
[ 3.867731] [drm:intel_print_wm_latency], Cursor WM0 latency 20 (2.0 usec)
[ 3.867732] [drm:intel_print_wm_latency], Cursor WM1 latency 4 (2.0 usec)
[ 3.867732] [drm:intel_print_wm_latency], Cursor WM2 latency 36 (18.0 usec)
[ 3.867733] [drm:intel_print_wm_latency], Cursor WM3 latency 70 (35.0 usec)
[ 3.867734] [drm:intel_print_wm_latency], Cursor WM4 latency 160 (80.0 usec)
[ 3.867735] [drm:intel_modeset_init], 3 display pipes available.
[ 3.867747] [drm:intel_ddi_pll_init], CDCLK running at 540000KHz
[ 3.867748] [drm:intel_shared_dpll_init], 0 shared PLLs initialized
[ 3.867764] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[ 3.868806] [drm:intel_dp_init_connector], Adding eDP connector on port A
[ 3.868816] [drm:intel_dp_i2c_init], i2c_init DPDDC-A
[ 3.868887] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
[ 3.869074] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[ 3.871943] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
[ 3.872787] ACPI: Battery Slot [BAT0] (battery present)
[ 3.874200] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
[ 3.874382] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
[ 3.874899] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[ 3.876619] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 125 t8 2100 t9 2500 t10 740 t11_t12 6000
[ 3.876620] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[ 3.876621] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 74, power cycle delay 600
[ 3.876622] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 210, off delay 250
[ 3.876704] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
[ 3.877558] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[ 3.879961] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 41 00 00 01 c0 02 00 00 00 0f 01 00
[ 3.882653] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x7d00834, PP_OFF 0x2e409c4, PP_DIV 0x186906
[ 3.888798] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 3.895156] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 3.896421] lib80211_crypt: registered algorithm 'TKIP'
[ 3.896584] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
[ 3.910485] applesmc: key=614 fan=2 temp=41 index=40 acc=0 lux=2 kbd=1
[ 3.911289] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 3.911296] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 3.911298] [drm:intel_panel_get_backlight], get backlight PWM = 0
[ 3.911306] [drm:intel_panel_get_max_backlight], max backlight PWM = 1953
[ 3.918000] systemd-udevd[864]: renamed network interface wlan0 to wlp3s0
[ 3.925993] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000]
[ 3.928036] [drm:init_status_page], render ring hws offset: 0x00000000
[ 3.929988] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
[ 3.929996] [drm:init_status_page], bsd ring hws offset: 0x00022000
[ 3.930059] [drm:init_status_page], blitter ring hws offset: 0x00043000
[ 3.930113] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
[ 3.930197] [drm:create_default_context], Default HW context loaded
[ 3.930198] [drm:i915_gem_context_init], HW context support initialized
[ 3.930267] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
[ 3.930271] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
[ 3.930273] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
[ 3.930275] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
[ 3.930276] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port A using clock 0x20000000
[ 3.930279] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe A
[ 3.930282] [drm:intel_ddi_get_config], pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
[ 3.930283] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: enabled, pipe A
[ 3.930285] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:eDP-1] hw state readout: enabled
[ 3.930287] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled
[ 3.930289] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[ 3.930290] [drm:intel_dump_pipe_config], cpu_transcoder: P
[ 3.930291] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 3.930292] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.930293] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 7870145, gmch_n: 8388608, link_m: 655845, link_n: 524288, tu: 64
[ 3.930295] [drm:intel_dump_pipe_config], requested mode:
[ 3.930296] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 2880 0 0 0 1800 0 0 0 0x0 0x0
[ 3.930298] [drm:intel_dump_pipe_config], adjusted mode:
[ 3.930298] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x9
[ 3.930300] [drm:intel_dump_crtc_timings], crtc timings: 0 2880 2928 2960 3040 1800 1803 1809 1852, type: 0x0 flags: 0x9
[ 3.930301] [drm:intel_dump_pipe_config], port clock: 0
[ 3.930302] [drm:intel_dump_pipe_config], pipe src size: 2880x1800
[ 3.930303] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 3.930304] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 3.930306] [drm:intel_dump_pipe_config], ips: 0
[ 3.930306] [drm:intel_dump_pipe_config], double wide: 0
[ 3.930308] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
[ 3.930309] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 3.930309] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 3.930310] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.930312] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.930313] [drm:intel_dump_pipe_config], requested mode:
[ 3.930313] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 3.930315] [drm:intel_dump_pipe_config], adjusted mode:
[ 3.930315] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 3.930317] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 3.930318] [drm:intel_dump_pipe_config], port clock: 0
[ 3.930319] [drm:intel_dump_pipe_config], pipe src size: 0x0
[ 3.930320] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 3.930321] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 3.930322] [drm:intel_dump_pipe_config], ips: 0
[ 3.930322] [drm:intel_dump_pipe_config], double wide: 0
[ 3.930324] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
[ 3.930325] [drm:intel_dump_pipe_config], cpu_transcoder: C
[ 3.930325] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 3.930326] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.930327] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.930328] [drm:intel_dump_pipe_config], requested mode:
[ 3.930329] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 3.930330] [drm:intel_dump_pipe_config], adjusted mode:
[ 3.930331] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 3.930332] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 3.930334] [drm:intel_dump_pipe_config], port clock: 0
[ 3.930334] [drm:intel_dump_pipe_config], pipe src size: 0x0
[ 3.930335] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 3.930336] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 3.930337] [drm:intel_dump_pipe_config], ips: 0
[ 3.930338] [drm:intel_dump_pipe_config], double wide: 0
[ 3.930342] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
[ 3.930343] [drm:check_encoder_state], [ENCODER:10:DAC-10]
[ 3.930345] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
[ 3.930346] [drm:check_crtc_state], [CRTC:3]
[ 3.930350] [drm:check_crtc_state], [CRTC:5]
[ 3.930352] [drm:check_crtc_state], [CRTC:7]
[ 3.930367] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1]
[ 3.930368] [drm:intel_dp_detect], [CONNECTOR:12:eDP-1]
[ 3.930597] [drm:intel_dp_probe_oui], Sink OUI: 0010fa
[ 3.930781] [drm:intel_dp_probe_oui], Branch OUI: 000000
[ 3.930791] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 3.930794] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes :
[ 3.930796] [drm:drm_mode_debug_printmodeline], Modeline 13:"2880x1800" 60 337750 2880 2928 2960 3040 1800 1803 1809 1852 0x48 0x9
[ 3.930799] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
[ 3.930801] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
[ 3.930809] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
[ 3.939980] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 3.939983] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.990935] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 3.998903] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.998905] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 3.998907] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
[ 3.998909] [drm:drm_setup_crtcs],
[ 3.998910] [drm:drm_enable_connectors], connector 12 enabled? yes
[ 3.998911] [drm:drm_enable_connectors], connector 9 enabled? no
[ 3.998912] [drm:drm_target_preferred], looking for cmdline mode on connector 12
[ 3.998913] [drm:drm_target_preferred], looking for preferred mode on connector 12
[ 3.998914] [drm:drm_target_preferred], found mode 2880x1800
[ 3.998915] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 3.998918] [drm:drm_setup_crtcs], desired mode 2880x1800 set on crtc 3
[ 3.998921] [drm:i915_gem_object_create_stolen], creating stolen object: size=13c7000
[ 3.998925] [drm:i915_pages_create_for_stolen], offset=0x0, size=20738048
[ 4.003031] [drm:intelfb_create], allocated 2880x1800 fb: 0x000c0000, bo ffff88046a232000
[ 4.003106] fbcon: inteldrmfb (fb0) is primary device
[ 4.003141] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[ 4.003142] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[ 4.003143] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 4.003144] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 4.003146] [drm:drm_mode_debug_printmodeline], Modeline 19:"2880x1800" 60 337750 2880 2928 2960 3040 1800 1803 1809 1852 0x48 0x9
[ 4.003147] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
[ 4.003148] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
[ 4.003149] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 4.003151] [drm:connected_sink_compute_bpp], [CONNECTOR:12:eDP-1] checking for sink bpp constrains
[ 4.003153] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 337750KHz
[ 4.003156] [drm:intel_dp_compute_config], DP link bw 0a lane count 4 clock 270000 bpp 24
[ 4.003157] [drm:intel_dp_compute_config], DP link bw required 810600 available 864000
[ 4.003158] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 4.003159] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 4.003160] [drm:intel_dump_pipe_config], cpu_transcoder: P
[ 4.003160] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 4.003161] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 4.003162] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 7870145, gmch_n: 8388608, link_m: 655845, link_n: 524288, tu: 64
[ 4.003162] [drm:intel_dump_pipe_config], requested mode:
[ 4.003163] [drm:drm_mode_debug_printmodeline], Modeline 0:"2880x1800" 60 337750 2880 2928 2960 3040 1800 1803 1809 1852 0x48 0x9
[ 4.003164] [drm:intel_dump_pipe_config], adjusted mode:
[ 4.003165] [drm:drm_mode_debug_printmodeline], Modeline 0:"2880x1800" 60 337750 2880 2928 2960 3040 1800 1803 1809 1852 0x48 0x9
[ 4.003166] [drm:intel_dump_crtc_timings], crtc timings: 337750 2880 2928 2960 3040 1800 1803 1809 1852, type: 0x48 flags: 0x9
[ 4.003166] [drm:intel_dump_pipe_config], port clock: 270000
[ 4.003167] [drm:intel_dump_pipe_config], pipe src size: 2880x1800
[ 4.003167] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 4.003168] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 4.003168] [drm:intel_dump_pipe_config], ips: 0
[ 4.003169] [drm:intel_dump_pipe_config], double wide: 0
[ 4.010975] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9
[ 4.011072] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input8
[ 4.011162] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input7
[ 4.016316] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[ 4.017937] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 4.017941] [drm:ironlake_edp_backlight_off],
[ 4.035902] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 4.036103] scsi1 : usb-storage 2-4:1.0
[ 4.036991] usbcore: registered new interface driver usb-storage
[ 4.183897] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 4.284998] [drm:ironlake_edp_panel_off], Turn eDP power off
[ 4.285003] [drm:ironlake_wait_panel_off], Wait for panel power off time
[ 4.285008] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
[ 4.343776] Switched to clocksource tsc
[ 4.352834] usb 1-8: new full-speed USB device number 3 using xhci_hcd
[ 4.365559] usb 1-8: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 4.365956] hub 1-8:1.0: USB hub found
[ 4.366089] hub 1-8:1.0: 3 ports detected
[ 4.519739] usb 1-12: new full-speed USB device number 4 using xhci_hcd
[ 4.544454] input: bcm5974 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/input/input10
[ 4.544547] usbcore: registered new interface driver bcm5974
[ 4.555302] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input11
[ 4.555437] apple 0003:05AC:0262.0004: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-12/input0
[ 4.628705] usb 1-8.1: new full-speed USB device number 5 using xhci_hcd
[ 4.642449] usb 1-8.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.644139] input: HID 05ac:820a as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.1/1-8.1:1.0/input/input12
[ 4.644306] hid-generic 0003:05AC:820A.0006: input,hidraw1: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:14.0-8.1/input0
[ 4.678194] apple 0003:05AC:0262.0005: hidraw2: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-12/input1
[ 4.678216] usbcore: registered new interface driver usbhid
[ 4.678217] usbhid: USB HID core driver
[ 4.679920] random: nonblocking pool is initialized
[ 4.682360] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5/input2
[ 4.685312] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/input/input13
[ 4.685410] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:14.0-5:1
[ 4.687394] input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/input/input14
[ 4.687489] logitech-djdevice 0003:046D:C52B.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:14.0-5:2
[ 4.689283] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/input/input15
[ 4.689378] logitech-djdevice 0003:046D:C52B.0009: input,hidraw6: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:14.0-5:3
[ 4.706634] usb 1-8.2: new full-speed USB device number 6 using xhci_hcd
[ 4.720151] usb 1-8.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.721983] input: HID 05ac:820b as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.2/1-8.2:1.0/input/input16
[ 4.722194] hid-generic 0003:05AC:820B.000A: input,hidraw7: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:14.0-8.2/input0
[ 4.794626] usb 1-8.3: new full-speed USB device number 7 using xhci_hcd
[ 4.813495] Bluetooth: Core ver 2.17
[ 4.813502] NET: Registered protocol family 31
[ 4.813502] Bluetooth: HCI device and connection manager initialized
[ 4.813506] Bluetooth: HCI socket layer initialized
[ 4.813507] Bluetooth: L2CAP socket layer initialized
[ 4.813509] Bluetooth: SCO socket layer initialized
[ 4.814415] usbcore: registered new interface driver btusb
[ 4.933368] usb 1-8.1: USB disconnect, device number 5
[ 5.041059] scsi 1:0:0:0: Direct-Access APPLE SD Card Reader 3.00 PQ: 0 ANSI: 6
[ 5.041187] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 5.042147] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 5.059714] usb 1-8.2: USB disconnect, device number 6
[ 5.164317] [drm:intel_update_fbc], no output, disabling
[ 5.164322] [drm:__intel_set_power_well], Requesting to disable the power well
[ 5.164339] [drm:ironlake_update_plane], Writing base 000C0000 00000000 0 0 11520
[ 5.164343] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:2880x1800]
[ 5.164344] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
[ 5.164352] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
[ 5.164354] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
[ 5.164357] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
[ 5.164364] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
[ 5.164366] [drm:ironlake_edp_panel_vdd_on], eDP was not running
[ 5.365236] [drm:ironlake_edp_panel_on], Turn eDP power on
[ 5.365244] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
[ 5.365248] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
[ 5.365253] [drm:ironlake_wait_panel_on], Wait for panel power on
[ 5.365256] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
[ 5.782987] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
[ 5.782995] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
[ 5.795196] [drm:intel_print_rc6_info], Haswell: only RC6 available
[ 5.795197] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 5.796913] [drm:gen6_enable_rps], Overclocking supported. Max: 1200MHz, Overclock max: 1200MHz
[ 5.858989] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 5.859468] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 5.859933] [drm:intel_dp_start_link_train], clock recovery OK
[ 5.860711] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[ 5.911812] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 5.911983] [drm:ironlake_edp_backlight_on],
[ 6.122728] [drm:intel_panel_enable_backlight], pipe A
[ 6.122730] [drm:intel_panel_get_max_backlight], max backlight PWM = 1953
[ 6.122734] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1953
[ 6.122736] [drm:intel_edp_psr_match_conditions], PSR disable by flag
[ 6.128690] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
[ 6.146683] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
[ 6.146685] [drm:check_encoder_state], [ENCODER:10:DAC-10]
[ 6.146686] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
[ 6.146687] [drm:check_crtc_state], [CRTC:3]
[ 6.146691] [drm:check_crtc_state], [CRTC:5]
[ 6.146692] [drm:check_crtc_state], [CRTC:7]
[ 6.146695] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[ 6.146697] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[ 6.146698] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
[ 6.146699] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[ 6.146700] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[ 6.146701] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
[ 6.146705] Console: switching to colour frame buffer device 360x112
[ 6.146713] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[ 6.146715] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 6.146716] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
[ 6.161854] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.161854] i915 0000:00:02.0: registered panic notifier
[ 6.162043] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
[ 6.162055] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 6.162093] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input17
[ 6.167185] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 6.167226] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input18
[ 6.167260] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.167549] [drm:__intel_set_power_well], Enabling power well
[ 6.167575] snd_hda_intel 0000:00:03.0: irq 52 for MSI/MSI-X
[ 6.172509] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 6.172556] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 6.172593] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 7.285389] EXT4-fs (sda2): re-mounted. Opts: user_xattr
[ 7.350312] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 7.644985] type=1006 audit(1389163810.467:2): pid=1257 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
[ 8.845860] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.845867] Bluetooth: BNEP socket layer initialized
[ 8.848519] Bluetooth: RFCOMM TTY layer initialized
[ 8.848524] Bluetooth: RFCOMM socket layer initialized
[ 8.848527] Bluetooth: RFCOMM ver 1.11
[ 9.026861] NET: Registered protocol family 17
[ 13.649245] type=1006 audit(1389163816.474:3): pid=1486 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
[ 13.785595] cfg80211: Calling CRDA for country: US
[ 13.787150] cfg80211: Regulatory domain changed to country: US
[ 13.787152] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.787153] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 13.787154] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 13.787154] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.787155] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.787156] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.787156] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 13.787157] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 19.384208] wmi: Mapper loaded
[ 19.389520] ACPI Warning: \_SB_.PCI0.IGPU._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[ 19.389544] ACPI Warning: \_SB_.PCI0.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 19.389556] ACPI Warning: \_SB_.PCI0.P0P2.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[ 19.389564] ACPI Warning: \_SB_.PCI0.P0P2.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 19.389606] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 19.390013] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7290a2
[ 19.390014] nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
[ 19.390015] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
[ 19.392102] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 19.486206] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 19.486206] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 19.486324] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 19.486326] nouveau [ VBIOS][0000:01:00.0] version 80.07.bf.00.02
[ 19.486557] nouveau 0000:01:00.0: irq 53 for MSI/MSI-X
[ 19.486566] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 19.486603] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
[ 19.486604] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
[ 19.486604] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 19.518383] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 19.518386] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 19.518390] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 19.518420] nouveau [ CLK][0000:01:00.0] 07: core 270-405 MHz memory 419 MHz
[ 19.518463] nouveau [ CLK][0000:01:00.0] 0a: core 270-925 MHz memory 780 MHz
[ 19.518493] nouveau [ CLK][0000:01:00.0] 0e: core 270-925 MHz memory 2000 MHz
[ 19.518512] nouveau [ CLK][0000:01:00.0] 0f: core 270-925 MHz memory 2508 MHz
[ 19.518658] nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 340 MHz
[ 19.553230] vga_switcheroo: enabled
[ 19.553364] [TTM] Zone kernel: Available graphics memory: 8194340 kiB
[ 19.553365] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 19.553365] [TTM] Initializing pool allocator
[ 19.553367] [TTM] Initializing DMA pool allocator
[ 19.553370] nouveau [ DRM] VRAM: 2048 MiB
[ 19.553371] nouveau [ DRM] GART: 1048576 MiB
[ 19.553372] nouveau [ DRM] Pointer to BIT loadval table invalid
[ 19.553373] nouveau [ DRM] TMDS table version 2.0
[ 19.553374] nouveau [ DRM] DCB version 4.0
[ 19.553384] nouveau [ DRM] DCB outp 00: 04810fb6 0f230010
[ 19.553385] nouveau [ DRM] DCB outp 01: 01821fd6 0f420020
[ 19.553385] nouveau [ DRM] DCB outp 02: 01021f12 00020020
[ 19.553386] nouveau [ DRM] DCB outp 03: 08832fc6 0f420010
[ 19.553387] nouveau [ DRM] DCB outp 04: 08032f02 00020010
[ 19.553387] nouveau [ DRM] DCB outp 05: 02843f62 00020010
[ 19.553388] nouveau [ DRM] DCB conn 00: 00020047
[ 19.553389] nouveau [ DRM] DCB conn 01: 02208146
[ 19.553390] nouveau [ DRM] DCB conn 02: 01104246
[ 19.553390] nouveau [ DRM] DCB conn 03: 00410361
[ 19.554503] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 19.554503] [drm] No driver support for vblank timestamp query.
[ 19.566774] nouveau [ DRM] MM: using COPY for buffer copies
[ 19.566778] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:eDP-2]
[ 19.595226] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:eDP-2] disconnected
[ 19.595227] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
[ 19.597528] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
[ 19.597529] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
[ 19.610024] nouveau [ DRM] display: 4x270000 dpcd 0x11
[ 19.610025] nouveau [ DRM] encoder: 4x270000
[ 19.610026] nouveau [ DRM] maximum: 4x270000
[ 19.610032] nouveau [ DRM] native mode from preferred
[ 19.610035] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] probed modes :
[ 19.610036] [drm:drm_mode_debug_printmodeline], Modeline 28:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 19.610037] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 19.610039] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 19.610040] [drm:drm_mode_debug_printmodeline], Modeline 29:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 19.610041] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 19.610042] [drm:drm_mode_debug_printmodeline], Modeline 37:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 19.610043] [drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 19.610044] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 19.610045] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 19.610046] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 19.610047] [drm:drm_mode_debug_printmodeline], Modeline 34:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 19.610049] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1]
[ 19.611338] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1] disconnected
[ 19.611339] [drm:drm_setup_crtcs],
[ 19.611340] [drm:drm_enable_connectors], connector 17 enabled? no
[ 19.611340] [drm:drm_enable_connectors], connector 19 enabled? no
[ 19.611341] [drm:drm_enable_connectors], connector 22 enabled? yes
[ 19.611341] [drm:drm_enable_connectors], connector 25 enabled? no
[ 19.611342] [drm:drm_target_preferred], looking for cmdline mode on connector 22
[ 19.611343] [drm:drm_target_preferred], looking for preferred mode on connector 22
[ 19.611343] [drm:drm_target_preferred], found mode 1920x1080
[ 19.611344] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 19.611345] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 13
[ 19.648619] nouveau [ DRM] allocated 1920x1080 fb: 0x80000, bo ffff880467af4800
[ 19.648662] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[ 19.648666] [drm:nouveau_pmops_runtime_idle], failing to power off - not optimus
[ 19.648669] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 1
[ 19.648673] [drm:nouveau_pmops_runtime_idle], failing to power off - not optimus
[ 25.497852] hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
[ 25.607980] VGA switcheroo: switched nouveau off
[ 25.607986] nouveau [ DRM] suspending display...
[ 25.608006] nouveau [ DRM] unpinning framebuffer(s)...
[ 25.608089] nouveau [ DRM] evicting buffers...
[ 25.610740] nouveau [ DRM] waiting for kernel channels to go idle...
[ 25.610755] nouveau [ DRM] suspending client object trees...
[ 25.616371] nouveau [ DRM] suspending kernel object tree...
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
