Re: [PATCH v3 1/7] drm/i915: Add more dev ops for MIPI sub encoder

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 10 Dec 2013, Shobhit Kumar <shobhit.kumar@xxxxxxxxx> wrote:
> Some panels require one time programming if they do not contain their
> own eeprom for basic register initialization. The sequence is
>
> Panel Reset --> Send OTP --> Enable Pixel Stream --> Enable the panel
>
> v2: Based on review comments from Jani and Ville
>     - Updated the commit message with more details
>     - Move the new parameters out of this patch
>

Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>


> Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@xxxxxxxxx>
> Signed-off-by: Shobhit Kumar <shobhit.kumar@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/intel_dsi.c | 9 ++++++++-
>  drivers/gpu/drm/i915/intel_dsi.h | 5 +++++
>  2 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index 7b9b350..42ed28a 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -147,6 +147,9 @@ static void intel_dsi_enable(struct intel_encoder *encoder)
>  
>  	DRM_DEBUG_KMS("\n");
>  
> +	if (intel_dsi->dev.dev_ops->panel_reset)
> +		intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev);
> +
>  	temp = I915_READ(MIPI_DEVICE_READY(pipe));
>  	if ((temp & DEVICE_READY) == 0) {
>  		temp &= ~ULPS_STATE_MASK;
> @@ -162,6 +165,9 @@ static void intel_dsi_enable(struct intel_encoder *encoder)
>  		I915_WRITE(MIPI_DEVICE_READY(pipe), temp);
>  	}
>  
> +	if (intel_dsi->dev.dev_ops->send_otp_cmds)
> +		intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev);
> +
>  	if (is_cmd_mode(intel_dsi))
>  		I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(pipe), 8 * 4);
>  
> @@ -176,7 +182,8 @@ static void intel_dsi_enable(struct intel_encoder *encoder)
>  		POSTING_READ(MIPI_PORT_CTRL(pipe));
>  	}
>  
> -	intel_dsi->dev.dev_ops->enable(&intel_dsi->dev);
> +	if (intel_dsi->dev.dev_ops->enable)
> +		intel_dsi->dev.dev_ops->enable(&intel_dsi->dev);
>  }
>  
>  static void intel_dsi_disable(struct intel_encoder *encoder)
> diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
> index c7765f3..14509d6 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/intel_dsi.h
> @@ -39,6 +39,11 @@ struct intel_dsi_device {
>  struct intel_dsi_dev_ops {
>  	bool (*init)(struct intel_dsi_device *dsi);
>  
> +	void (*panel_reset)(struct intel_dsi_device *dsi);
> +
> +	/* one time programmable commands if needed */
> +	void (*send_otp_cmds)(struct intel_dsi_device *dsi);
> +
>  	/* This callback must be able to assume DSI commands can be sent */
>  	void (*enable)(struct intel_dsi_device *dsi);
>  
> -- 
> 1.8.3.2
>

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux